|

Turn Off Windows Protected Print Mode For Lexmark Printers (2026)

If your Lexmark printer driver will not install on Windows 11, or the Lexmark features vanished from your print settings, Windows protected print mode is a likely cause.

Microsoft says the mode removes printers that use third-party drivers and blocks new ones while it is on.

This guide shows how to turn the mode off and reinstall the Lexmark driver, or keep it on and use the Xerox app that Lexmark points to.

Quick answer: turn off Windows protected print mode

StepWhat to do
1. Open the settingSettings > Bluetooth & devices > Printers & scanners
2. Turn it offScroll to Printer preferences, select Turn Off under Windows protected print mode, then select Yes
3. ReinstallInstall the Lexmark driver package for your model again

If you see Set up instead of Turn Off, the mode is not on, which is an inference from Microsoft’s steps and not a status indicator Microsoft documents.

What the mode does

Lexmark describes the mode as a Microsoft change to how Windows talks to printers.

It uses only IPP Class Drivers and moves away from legacy v3 and v4 print drivers.

Lexmark says it started with Windows 11 24H2 and is meant to improve security and reduce reliance on legacy drivers.

Microsoft’s page says the mode uses Windows Ready Print and is designed for Mopria certified printers, which show a shield icon in Printers & scanners.

The timeline Lexmark lists

WhenWhat Lexmark says changes
January 2026No new third-party drivers are published through Windows Update
July 2026Windows defaults to the IPP Class Driver when you add a device
July 2027Third-party drivers receive no updates except security fixes

Lexmark’s page says the mode is disabled by default until 2027, and that the policy takes full effect that year.

What Microsoft says happens to your printer

When you turn the mode on, Microsoft says printers that use third-party drivers are uninstalled.

The driver is also deleted from the driver store and cannot be used while the mode is active.

When you turn it off, Microsoft says the original driver is restored once you reinstall the printer.

That means a Lexmark printer that vanished after the mode was switched on can come back, but only through a reinstall.

Turn off Windows protected print mode

  1. Select Start, then open Settings.
  2. Go to Bluetooth & devices > Printers & scanners.
  3. Scroll down to Printer preferences.
  4. Under Windows protected print mode, select Turn Off.
  5. Select Yes.

Microsoft says you can install printers that are not compatible after you turn it off.

Reinstall the Lexmark driver

Download the driver package for your exact model from Lexmark’s Drivers & downloads page and run the installer.

Our guide to downloading and installing a Lexmark printer driver covers each step, including the license screen.

If you would rather add the printer through Windows, follow our Windows 11 add a printer guide.

If the Turn Off button is blocked

Microsoft says that if the mode was enabled through group policy, you cannot disable it without contacting your administrator.

On a work or school PC, ask your IT team to change the policy.

Keep the mode on and use the Xerox app instead

Lexmark’s answer to the change is the Xerox Print and Scan Experience app, which it calls XPSE v10.

Lexmark says the app sits on top of Microsoft’s IPP Class Driver.

ChoiceWhat you get
Mode off, Lexmark driverThe model driver and printer software that Lexmark’s installer provides
Mode on, IPP Class Driver onlyStandard Windows printing without the Lexmark driver
Mode on, Xerox Print and Scan ExperienceAdvanced printing and scanning, per Lexmark, on top of the IPP Class Driver

What the Xerox app adds

Lexmark says the app supports advanced printing and scanning in protected print mode environments.

It says the app restores job-level controls such as finishing options, toner density and tray management.

Lexmark also calls it a unified solution for both Xerox and Lexmark devices.

Xerox says the app also covers scanning and sending scanned files, document editing and OCR, and pre-print adjustments.

Where to get it and what it needs

Xerox says the app runs on Windows 10, Windows 11 and macOS.

On Windows you get it from the Microsoft Store listing or from the Xerox support downloads page.

Lexmark’s downloads page adds that the Print Support Application version needs Windows 11 and the latest printer firmware.

Xerox says the app is compatible with Lexmark printers, but its page names no models apart from a Lexmark MX820 Series screenshot.

Xerox points to its Supported Products page for the full list, so check your model there before relying on the app.

Items Windows removes when the mode is on

Microsoft says XPS and Fax are removed when you turn the mode on.

ItemHow to bring it back after turning the mode off
XPSSearch for Windows Features, select Microsoft XPS Document Writer, then OK
FaxSettings > System > Optional features, then check Windows Fax and Scan

Microsoft also says software printers it does not support, such as OneNote (Desktop), are uninstalled.

What Lexmark recommends

Lexmark tells customers to get XPSE v10 so they do not lose advanced features.

It also tells them to review their print workflows and find any that depend on v3 or v4 drivers.

For timeline updates and best practice, Lexmark says to contact your Lexmark representative.

What Lexmark’s page does not say

Lexmark’s page does not explain how to check or change the mode, so the Settings steps above come from Microsoft.

It also does not list which Lexmark printers or drivers are covered.

Its wording about the relationship between XPSE and the Xerox Print Support App is unclear, so treat the two names as the same family of Xerox software until you check the download page for your model.

For other makers, read our guides for Brother printers and Canon printers, or our guide to updating or rolling back a printer driver.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *