How To Install An Epson Printer Driver In Windows 11 (2026)
To install an Epson printer driver in Windows 11, download the software for your exact model from Epson’s support site and run it.
Epson says its setup program should be started before the product is plugged in, so the order of the steps matters.
This guide covers the download, the connection choices, the Universal Print Driver, and what to do if Epson has no Windows 11 driver for your model.
Quick answer: install an Epson driver in Windows 11
| Step | What to do |
|---|---|
| 1. Find your model | Search for it at epson.com/support (US) or epson.ca/support (Canada) |
| 2. Check the operating system | Choose Windows 11 in the Operating System drop-down if needed |
| 3. Download | Get the driver and software from the Downloads tab |
| 4. Run the setup | Keep the printer unplugged from the PC until the installer asks for it |
| 5. Pick a connection | Choose wireless or direct USB on the Select Your Connection screen |
Check that a Windows 11 driver exists
Epson says it provides a Windows 11 driver on a product’s support page when one exists.
Search for your product on the Epson support site, and choose Windows 11 from the Operating System drop-down if the list is filtered.
For scanners, Epson says it supports 32-bit and 64-bit Windows, including Windows 11.
If Epson has no Windows 11 driver for your model
Epson says you can use the simple drivers that come with Windows 11 instead.
Windows installs them automatically when the product is on the same network as the PC or connected by USB cable.
Download the driver from Epson
- Go to epson.com/support in the US, or epson.ca/support in Canada.
- Search for your exact printer model.
- Open the Downloads tab.
- Choose Windows 11 or your Windows version.
- Download the driver and software package and save it.
Epson says all the software required for a product can be found on the Downloads tab.
Before you run the installer
Epson’s setup sheet gives one rule that trips up many people.
Make sure the product is not connected to your computer until the software tells you to connect it.
If a Found New Hardware screen appears on Windows, click Cancel and disconnect the USB cable.
Epson adds that a computer with no CD or DVD drive needs an internet connection to get the software.
Run the setup program
- Open the downloaded package, or insert the product CD if you have one and a disc drive.
- Select your language and click Next if prompted.
- Accept the license agreement and click Install.
- Follow the on-screen instructions until the Select Your Connection screen appears.
Choose wireless or USB
The Select Your Connection screen offers two main choices.
| Choice | What Epson says |
|---|---|
| Wireless connection | The installer usually tries to set up the connection automatically, and you may need to enter your network name (SSID) and password |
| Direct USB connection | Have a USB cable ready, because Epson notes the cable is not included |
Use a temporary USB cable for Wi-Fi setup
Some Epson models set up Wi-Fi through a temporary USB connection.
- Choose Wireless connection, then Set up printer for the first time, then Using temporary USB cable connection.
- Connect the USB cable when the installer asks, and wait for it to detect the product.
- Allow the EpsonNet Setup program through any firewall prompt by choosing Unblock or Allow.
- Select your network and enter the password if needed.
- Wait several minutes for the configuration to finish.
- When prompted, disconnect the USB cable and click OK, then Finish.
Epson says to have your network name and password ready first, and that passphrases are case-sensitive.
If the installer cannot find the printer
| Problem | Epson’s suggestion |
|---|---|
| Wireless setup fails | Select the correct network name, restart your router, and confirm it offers a 2.4 GHz connection |
| Firewall prompt | Allow the prompt when it appears |
| Password rejected | Enter it with the correct capitalization |
| USB setup cannot find the product | Make sure the product is turned on and the cable is securely connected |
If the printer installs but shows offline later, see our guide to fixing an Epson printer that shows offline.
Install the Epson Universal Print Driver
Epson’s Universal Print Driver supports printer languages including PCL and ESC/P-R, though not every language works on every model.
Turn on the product and connect it to the same network as your computer first.
- Download the driver from your product’s Downloads tab.
- Open the downloaded package.
- Follow the prompts until the connection screen appears.
- Choose the network connection option and click OK.
- Wait for the product search to finish.
- For one product, keep Add EPSON Universal Print Driver selected and continue.
- Select your product in the Found Printers list, and clear Set as default printer if you do not want that.
- Click OK.
Epson says that checking the PCL6 default box makes PCL6 the default language, and leaving it clear uses ESC/P-R.
Install the scanner driver
For a scanner, Epson’s steps are to download the scanner driver and the Epson Scan 2 utility from the Downloads tab, then run the installer.
Epson says to keep the scanner disconnected until the software is installed or the installer tells you to plug it in.
After the driver is installed
Print a test page to confirm the printer works.
If an old driver is causing trouble, first remove the printer in Windows 11 and then install the new driver.
If the printer is not listed at all, our guide to adding a printer in Windows 11 covers the built-in route.
To keep the driver current later, see our guide to updating Epson drivers and firmware.