|

Install Or Update A Brother Printer Driver In Windows 11 (2026)

To install or update a Brother printer driver on Windows 11, download the Full Driver and Software Package from Brother’s Downloads section and run it.

Brother recommends keeping the driver and the firmware on the latest version, and it treats them as two separate updates.

This guide covers the full install, the built-in Windows driver, a driver update, and the firmware update.

Quick answer: install the Brother driver

StepWhat to do
1. PrepareDisconnect any interface cable, turn the Brother machine on, and log on to Windows as an administrator
2. DownloadGet the Full Driver & Software Package for your model from Brother’s Downloads section
3. RunOpen the extracted folder and double-click start.exe if the installer does not open
4. Follow the promptsTrust Brother Industries, Ltd. if Windows Security asks, then restart only after the install finishes

If the install fails or the printer will not print afterward, check Windows protected print mode, which blocks some Brother drivers, using our guide to turning it off for Brother printers.

Check these things before you start

Brother’s install page lists four checks that apply before any Windows install.

  1. Disconnect the Brother machine from the computer if an interface cable is connected.
  2. Turn the Brother machine on.
  3. Turn the computer on and log on with administrator rights.
  4. Look at the machine’s screen or lights and confirm no error is showing.

Brother’s Windows 11 support statement also tells you to check the Product Support List for your model.

It says that if a laser model is not listed, there are no plans to support Windows 11 for it.

Download the right package

Brother’s page names the Full Driver & Software Package as the download to use on Windows.

It includes the driver and the other Brother software for the machine, and the download page carries its own installation instructions.

If you cannot find the file afterward, open the folder where you saved it and look for the extracted folder.

Brother says that folder is temporary and is named install or after your model, for example a name that ends in Windows_Installer.

Run the installer

  1. Open the extracted folder.
  2. If the installation screen does not appear, double-click start.exe.
  3. Follow the on-screen instructions.
  4. If a Windows Security dialog appears, check Always trust software from Brother Industries, ltd., then select Install.
  5. If the installer says to restart, wait until the installation is finished, then restart the computer.

Brother’s page says not to restart in the middle of the install.

Use the built-in Windows driver instead

Brother also describes built-in drivers that come with Windows or arrive through Windows Update.

Brother’s page for an older multifunction model says they need an internet connection and cover basic functions only, so scanning, PC-FAX and Control Center may be unavailable.

ConnectionWhat Brother says the built-in driver supports
USBPrinting and scanning, and scanning only on machines with a scanner
NetworkPrinting only

Treat that table as the example Brother gives for that model, because support differs by machine.

Built-in driver over USB

  1. Connect the machine directly to the computer with a USB cable and do not use a USB hub.
  2. Wait for the driver to install automatically.
  3. If it does not install, reconnect the cable.
  4. If it still does not install, unplug the machine’s power cord, plug it back in and turn it on.

Built-in driver over a network

Brother’s steps use the older Devices and Printers screen, so they may look different on Windows 11.

  1. Open Control Panel, then Hardware and Sound, then Devices and Printers.
  2. Click Add a printer and select your model name.
  3. If the model is missing, click The printer that I want isn’t listed.
  4. Select Add a printer using a TCP/IP address or hostname and enter the machine’s IP address.
  5. Check Query the printer and automatically select the driver to use.
  6. If asked for a manufacturer, select Brother and pick your model.
  7. If your machine is not in the list, click Windows Update, which Brother says can take a few minutes.

Our Windows 11 add a printer guide shows the current Settings route for the same job.

Update the Brother driver

Brother’s update page gives a two-step method for Windows.

  1. Uninstall the existing Brother drivers and software.
  2. Download the latest Full Driver & Software Package and install it.

Brother’s uninstall page recommends Brother Utilities for step one.

Open Brother Utilities from the Start menu, choose your model, click Uninstall and follow the prompts.

That page adds that if Brother Utilities cannot remove the driver, you can download the Uninstall Tool from the Downloads section.

It says to restart the computer after uninstalling.

Update the Brother firmware

Brother says the Firmware Update Tool needs the driver installed on the computer first.

  1. Open your model’s page on Brother’s support site.
  2. Check the Information column at the bottom for a firmware update message.
  3. Click the link and select your operating system.
  4. Follow the instructions on the Firmware Update Tool download screen.

Brother adds that network models can also be updated from an Android or iOS device with the Brother iPrint&Scan app.

Driver update versus firmware update

UpdateWhere it runsWhat you need first
DriverYour Windows PCUninstall the old Brother software, then install the new package
FirmwareThe Brother machine, through the Firmware Update ToolThe driver installed on the PC, plus internet access

If the machine is not detected

Brother’s Windows 11 statement says some models may not work over USB with a Windows 11 PC.

It marks the affected models and says a Microsoft update from December 2021 is said to fix this.

If a USB model is still not found, see our Brother printer offline fix and our guide to updating or rolling back a printer driver.

Remove a printer you no longer need

Brother’s uninstall page says you can also remove the machine from Settings.

Open Start, then Settings, then Bluetooth & devices, then Printers & scanners, select the Brother machine and click Remove.

Our guide to removing a printer in Windows 11 covers the driver package as well.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *