|

How To Fix Plugged In Not Charging In Windows 11 (2026)

Your Windows 11 laptop is plugged in, but the battery icon says it is not charging, or the percentage keeps dropping.

Most of the time the cause is the charger, the cable, the port or a battery-care feature, and not a dead battery.

This guide lists each message Windows shows, the fix Microsoft gives for it, and the extra steps for Surface devices.

Plugged in, not charging: the quick answer

What you seeMost likely causeTry this first
Charging slowly or discharging while plugged inCharger or cable does not meet the PC’s needsUse the charger and cable made for your PC
Fully Smart charged, below 100%Smart charging is holding the battery at a set levelNothing is broken, this is intentional
Plugged in, not charging (Surface)Wrong power supply or a high-power accessoryUse the Surface power supply and unplug accessories
Battery not detected, red X (Surface)PC sees the charger but not the batteryStart a service request with Microsoft
Stops at 50% or 80% (Surface)Battery Limit or Smart chargingCheck those settings

Why a plugged in laptop may not charge

Charging works only when the charger, the cable and the PC all agree on the power level.

ChargerCableCharging portBattery

If one link in this chain is weak, Windows may show a slow charging or discharging message on the Battery icon in the taskbar.

Fix 1: Use the charger and cable made for your PC

Microsoft says the message can appear when the charger does not meet your device’s requirements.

  1. Switch to the charger and the cable that came with the laptop.
  2. Plug the charger into the charging port of the PC, not another port.
  3. Check that the cable is firmly seated at both ends.
  4. Try a different wall outlet.

Some USB chargers, including micro USB and USB-C chargers, are proprietary, so your PC might only work with a charger from its manufacturer.

Fix 2: Match the charger power to the PC

A charger that is too weak may power the laptop but never charge it.

CauseWhat Microsoft says
Incompatible chargerSome chargers are proprietary and only work with the maker’s PCs
Charger not powerful enoughThe PC needs more power than the charger gives
Cable limitsThe cable must meet the power needs of both the charger and the PC
USB-C limitsUSB-C supports up to 5V, 3A, 15W, and USB Power Delivery allows higher levels

Microsoft’s example is a PC that needs 12V and 3A, for which a 5V, 3A charger is not the best choice.

The fastest charging needs the PC, the charger and the cable to support the same standards and the power level the PC needs.

If you only see a warning on a USB-C port, read our guide to USB-C charger notifications in Windows 11.

Fix 3: Charge the laptop while it is asleep or off

Microsoft lists this as a way to speed up charging when the PC is busy.

  1. Select Start, then Power, then Sleep or Shut down.
  2. Leave the charger connected for a while.
  3. Turn the PC on and check the battery percentage.

Fix 4: Check whether Smart charging is on

Smart charging is a Windows 11 battery-care feature that can stop charging below 100% to help the battery last longer.

When it is active, a heart appears on the Battery icon in the taskbar and in the Power & battery settings.

Hovering over the icon shows Fully Smart charged, which means the laptop is plugged in but not charging, and Microsoft says this is intentional.

Some manufacturers turn it on by default, and Microsoft says the steps to turn it off vary by manufacturer, so use your laptop maker’s support site.

Microsoft suggests turning it off before a trip or a long session away from an outlet, when you may need the full battery.

To change when Windows saves power on battery, see our steps to turn on Energy saver in Windows 11.

Surface: what each battery icon means

Microsoft gives separate fixes for Surface Pro, Surface Laptop, Surface Go and Surface Book, based on the symbol on the Battery icon.

Battery iconMeaningFix
Plug symbol, not chargingCharger detected, not chargingUse the Surface power supply, unplug high-power accessories, reinstall the battery driver
Red XBattery not detectedStart a service request through Device service and repairs
No symbolPower supply not detectedFlip the connector, wait 10 minutes, reinstall the battery driver
Exclamation markPower received, but not enough to chargeUse the supply made for your Surface, then restart
HeartCharging to 80%Smart charging may be on

Surface: things to check first

  1. Try a different power outlet.
  2. Make sure all cable connections are secure.
  3. Unplug anything from the USB port on a Surface Connect power supply.
  4. Disconnect high-power accessories and see whether charging starts.

On a Surface Connect charger the LED should be lit when it is plugged into the Surface, and if it is not, the power supply may be faulty.

Surface: force a restart

  1. Select Start, then Power, then Shut down, and wait for the Surface to turn off.
  2. Press and hold the power button for 20 seconds.
  3. If the logo appears after a few seconds, keep holding until it appears again.

Surface: reinstall the battery driver

Microsoft warns not to do this on a Surface Pro X, because restoring drivers there needs a full system reset.

  1. Plug in the Surface.
  2. Open Device Manager from the search bar.
  3. Expand Batteries.
  4. Right-click Microsoft Surface ACPI-Compliant Control Method Battery or Surface Battery and select Uninstall device.
  5. Select the computer at the top of the list, open the Action menu and select Scan for hardware changes.
  6. Select Start, then Power, then Restart.

Surface: clean the charging connector

  1. Unplug the power supply from the wall.
  2. Rub the connector pins back and forth with a pencil eraser.
  3. Clean the pins on the long, narrow end with a cotton swab dipped in rubbing alcohol.
  4. Let the pins dry completely, plug into the wall, then plug into the Surface.

Check the battery with a battery report

If the laptop charges but the battery is weak, Microsoft says a report shows installed battery and usage details.

  1. Select Start, type Command prompt, right-click it and choose Run as administrator.
  2. Type powercfg /batteryreport and press Enter.
  3. Open the folder shown in the window and double-click the HTML report.
  4. Review Installed battery, Recent usage and Battery usage.

When the battery is worn or swollen

Microsoft says battery capacity drops after repeated charge cycles, so an older laptop may need charging more often.

If the battery expands beyond the device’s enclosure, stop using the device immediately and do not press on it.

For a Surface that still will not charge, Microsoft offers self-repair, mail-in service and in-person support in some countries.

For other brands, contact the PC manufacturer to confirm which charger to use and to arrange service.

Sources

Microsoft Support: PC is charging slowly or discharging while it’s plugged in, Use Smart charging in Windows and Surface battery won’t charge.

Battery report steps come from Microsoft’s Caring for your battery in Windows.

Leave a Reply

Your email address will not be published. Required fields are marked *