|

How To Fix A Black Screen In Windows 11 (2026)

Your Windows 11 PC is on, but the screen is black, blank or stuck on a cursor.

Microsoft says the cause is often a stalled process, a display setting, a graphics driver or an unfinished update.

This guide goes from the quickest keyboard fixes to Safe Mode, driver rollback and System Restore.

Black screen in Windows 11: the quick answer

What you seeLikely causeTry first
Blank screen with a cursorStalled Windows process or driverRestart Windows Explorer in Task Manager
Blank screen at sign-inDisplay output misconfigured or a corrupted user profilePress Windows + P, then P again, then Enter
Blank screen after an updateIncompatible driver or incomplete updateRoll back the graphics driver in Safe Mode
Blank screen with a blinking cursorThe UEFI or BIOS cannot find a boot deviceCheck hardware and use recovery options

The order to try the fixes

Check connectionsKeyboard shortcutsForce restartSafe Mode

Start with the simplest steps, since the first five need no tools and no Safe Mode.

Fix 1: Check the power and connections

  1. Confirm the laptop is charged or plugged in.
  2. On a desktop, check that the monitor is connected, powered on and plugged in.
  3. Make sure the HDMI, DisplayPort or VGA cable is firmly connected at both ends.
  4. Try a different monitor or cable.
  5. On a laptop, disconnect external displays and other peripherals.

If the PC will not charge, see our guide to a laptop that is plugged in but not charging.

Fix 2: Reset the graphics driver with a shortcut

Press Windows + Ctrl + Shift + B at the same time.

Microsoft says a beep or a screen flicker means the shortcut worked.

For more ways to restart the driver, read how to reset your graphics driver in Windows 11.

Fix 3: Cycle through the display modes

  1. Press Windows + P.
  2. Press P again to move to the next mode.
  3. Press Enter to select it.

The extend or duplicate screen guide explains what each mode does.

Fix 4: Use Ctrl + Alt + Del

If the security screen appears after you press Ctrl + Alt + Del, the system is running and only the desktop is missing.

  1. Open Task Manager from that screen.
  2. Restart Windows Explorer.

Fix 5: Force a restart

Hold the power button for 20 seconds, then turn the PC back on.

Fix 6: Restart Windows Explorer when you see a cursor

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. Right-click Windows Explorer and select Restart.
  3. If it is not listed, select File, then Run new task.
  4. Type explorer.exe and press Enter.

Fix 7: Start Safe Mode when the screen stays blank

Microsoft’s route into recovery is to force the PC off, which you repeat until the recovery screen appears.

  1. Hold the power button for 10 seconds to force a shutdown.
  2. Turn the PC on, and repeat the forced shutdown 2 to 3 times until Recovery Mode appears.
  3. Select Troubleshoot, then Advanced Options, then Startup Settings, then Restart.
  4. Press F5 to choose Safe Mode with Networking.

If your device is encrypted, have your BitLocker recovery key ready for the Startup Settings screen.

Our guide to starting Windows 11 in Safe Mode covers the other ways in.

What the Startup Settings options do

After you select Restart in Startup Settings, press the number or the matching function key, or press Enter to start Windows normally.

KeyOptionWhat it does
F3Enable low-resolution videoUses your current video driver at low resolution and refresh rate, which helps reset display settings
F4Enable Safe ModeStarts Windows with a limited set of files and drivers
F5Safe Mode with NetworkingSafe Mode plus network drivers and services
F6Safe Mode with Command PromptSafe Mode with a command prompt instead of the usual interface
F9Disable automatic restart on system failureStops the restart loop after a crash

Low-resolution video is worth trying when the screen is black because of a display setting.

If the PC keeps starting in Safe Mode afterwards, press Windows + R, type msconfig, open the Boot tab and clear Safe boot under Boot options.

Fix 8: Update or roll back the graphics driver

Do this in Safe Mode.

  1. Open Device Manager and expand Display adapters.
  2. Right-click your graphics card and select Update driver.
  3. If the black screen began after a driver update, select Roll back driver instead.

Fix 9: Run System Restore

System Restore returns system files, registry settings and installed programs to an earlier restore point, and Microsoft says it can do this without affecting your personal files.

Use it if the black screen started after a new install, a driver update or a settings change.

  1. Boot into Recovery Mode, as in Fix 7.
  2. Select Troubleshoot, then Advanced options, then System Restore.
  3. Choose a restore point from before the problem started, and select Show more restore points to see older ones.
  4. Optionally select Scan for affected programs to see what the restore point would change.
  5. Select Next, then Finish.
  6. When it finishes, select Restart yourself, because the recovery environment does not restart on its own.

If you can reach the desktop in Safe Mode, press Windows + R, type rstrui.exe and press Enter to start System Restore there, and Windows restarts by itself afterwards.

An encrypted device needs the BitLocker recovery key to finish a restore from the recovery environment.

Shortcut reference

KeysWhat it does
Windows + Ctrl + Shift + BResets the graphics driver, with a beep or flicker
Windows + P, P, EnterCycles the display mode
Ctrl + Alt + DelOpens the security screen and Task Manager
Ctrl + Shift + EscOpens Task Manager directly
Power button for 20 secondsForces a restart

If you see an error message instead

For a black screen with a message such as “Your device ran into a problem and needs to restart”, Microsoft points to its guide on unexpected restarts and stop code errors.

Our guide to blue screen errors on Windows 11 covers those stop codes.

If the screen only goes dark now and then, see how to fix screen flickering in Windows 11.

For a Surface that will not turn on or start, Microsoft has a separate Surface troubleshooting article.

Source

Microsoft Support: Troubleshooting blank screens in Windows, Windows startup settings and System Restore.

Leave a Reply

Your email address will not be published. Required fields are marked *