|

How To Turn On Energy Saver In Windows 11 (2026)

Energy saver is the Windows 11 setting to reach for when the battery has to last longer than it normally would.

It took over from battery saver, so anyone hunting for the old name will find this one in its place.

You can switch it on in two clicks from the taskbar, or have Windows start it at a battery level you choose.

Quick answer: turn on energy saver

GoalWhat to do
Turn it on nowSelect the Battery icon on the taskbar, then select the Energy saver quick setting
Turn it on from SettingsStart > Settings > System > Power & battery > Energy saver, then set Always use energy saver to On
Start it automaticallyOn the same screen, pick a percentage next to Turn energy saver on when battery level is at
Stop the screen dimmingTurn off Lower screen brightness when using energy saver

What energy saver is

Microsoft describes energy saver as a feature that manages system processes and power use to balance performance against battery life.

Microsoft’s hardware documentation says it replaces battery saver in Windows 11 version 24H2 and later.

That same documentation recommends leaving it on all the time, even when the battery is full.

Turn on energy saver from the taskbar

  1. Select the Battery icon in the notification area, at the right end of the taskbar.
  2. Select the Energy saver quick setting.

Select the same quick setting again when you want it off.

This is the fastest route, because it skips the Settings app completely.

Turn on energy saver in Settings

  1. Select Start > Settings > System > Power & battery.
  2. Select Energy saver to open that section.
  3. Set Always use energy saver to On.

Microsoft’s support page says this keeps energy saver running until the next time you plug in the PC.

Set the same switch to Off to stop it.

Start energy saver at a set battery level

  1. Select Start > Settings > System > Power & battery.
  2. Select Energy saver to open that section.
  3. Find Turn energy saver on when battery level is at.
  4. Choose the battery percentage you want from the list next to it.

A higher percentage starts saving power sooner, and a lower one keeps full performance for longer.

Windows then turns the feature on by itself each time the charge drops to that level.

Stop energy saver from dimming the screen

Dimming is the change most people notice first.

Microsoft’s hardware documentation puts the default cut at 30 percent of display brightness, and notes that PC makers can set a different value.

  1. Select Start > Settings > System > Power & battery > Energy saver.
  2. Turn off Lower screen brightness when using energy saver.

The rest of energy saver keeps working with that switch off.

If the screen changes brightness even with energy saver off, see how to turn off adaptive brightness.

What changes whenever energy saver is on

AreaWhat Windows does
Display brightnessLowered by 30 percent unless you turn that option off
Transparency effectsTurned off on window backgrounds
Power modeLocked, so it cannot be changed in Settings

These three apply as soon as the feature is on, according to Microsoft’s hardware documentation.

What else changes on low battery

More limits apply when the PC is unplugged and the battery is low.

AreaWhat Windows does
Background appsBlocked, except apps you allow and some types such as internet calling apps
Windows UpdateNon-critical downloads wait, though Windows still scans for updates
SyncSome Microsoft apps, such as OneDrive, OneNote and Phone Link, may not sync
Diagnostic dataMost of it is held back, apart from critical data
Scheduled tasksMany are delayed until energy saver turns off

So if OneDrive files or app notifications seem late on a nearly empty battery, energy saver is a likely cause.

Microsoft says delayed tasks run once energy saver turns off.

Why power mode cannot be changed

Power mode is a separate setting on the same Power & battery screen, and energy saver locks it while it runs.

Turn energy saver off first if you want to change it.

Power modeMicrosoft’s description
Best power efficiencySaves battery life
BalancedBalances performance and battery life
Best performanceMaximizes performance

Windows 11 lets you pick one mode for Plugged in and another for On battery.

If power mode still will not change with energy saver off, Microsoft says a custom power plan may be selected.

The fix is to open Control Panel > System and Security > Power Options and select Balanced.

More battery settings on the same screen

Microsoft’s battery tips point to several other settings under Start > Settings > System > Power & battery.

  • Energy recommendations lists suggested changes that you can apply all at once or one by one.
  • The screen and sleep settings let you turn off the screen and put the PC to sleep after a shorter time on battery.
  • Battery usage shows use per app, and More options next to an app opens Manage background activity.

The sleep timers are covered in the Windows 11 sleep settings guide.

Microsoft also suggests a dark theme and a dark background, which the dark mode guide shows how to set.

What the laptop does when you shut the lid is a Control Panel option, explained in the lid and power button guide.

Which setting to use

SituationBest choice
You need extra battery right nowBattery icon > Energy saver quick setting
You want it to start by itselfTurn energy saver on when battery level is at, set to a percentage
You want it on for the whole tripAlways use energy saver set to On
The dim screen bothers youTurn off Lower screen brightness when using energy saver
You want lower power use while plugged in tooPower mode set to Best power efficiency under Plugged in

Sources

Steps and details come from Microsoft Support’s Battery saving tips for Windows and Power settings in Windows 11, and from Microsoft Learn’s Energy Saver hardware documentation.

Leave a Reply

Your email address will not be published. Required fields are marked *