How To Fix An HP Printer Scanner Not Found Error (2026)

When an HP printer prints fine but will not scan, the computer usually cannot find the scanner part of the device.

HP lists the exact messages for this fault and a set of fixes for Windows and Mac, which this guide follows in order.

Try a scan after each step so you can stop when it works.

Quick answer: errors and where to start

Message or symptomStart here
An error occurred communicating with the scanner or scanning deviceScan from the printer driver, then check the WIA service
No Computer Detected or Computer not foundRun Diagnose & Fix in the HP app
Scanner not foundReinstall the driver or HP app
Scan to computer is currently unavailableCheck the printer connection, then the HP app
Scan button does nothing or scanner keeps disconnectingRun Diagnose & Fix in the HP app

Run Diagnose & Fix in the HP app

HP’s scanner-issues page sends you to the HP app first, which needs Windows 10 or later, macOS 10.14 or later, iOS 14 or later or Android 7.0 or later.

  1. Open the HP app, or download it if you do not have it.
  2. On Windows, select the wrench icon in the bottom-left corner.
  3. On a Mac, use the printer drop-down in the top menu bar.
  4. Follow the onscreen instructions.

Scan from the printer driver in Windows

If scanning from the HP app or another app fails, HP suggests trying the scanner through its Windows driver.

  1. Make sure the printer is on and ready, and load the original.
  2. Search Windows for Control Panel and open Devices and Printers.
  3. Find your printer and confirm it is online, shown by a green circle with a check mark.
  4. Right-click the printer and select Start scan.
  5. Click Preview, drag the boundary lines around the area you want, and click Scan.
  6. Click Next, name the image and click Import.

By default, HP says scans are saved to your Pictures folder in a folder named by date and scan name.

Check the Windows Image Acquisition service

Windows Image Acquisition, or WIA, lets the computer talk to the scanner, so a stopped service makes scans fail.

  1. Search Windows for View local services.
  2. Find Windows Image Acquisition (WIA) and read its Status and Startup Type.
  3. If it shows Started or Running and Automatic, WIA is fine.
  4. If it shows Disabled or blank, right-click it and open Properties.
  5. On the General tab, set Startup type to Automatic and click Start under Service status.

If Start is grayed out, HP says to confirm that the services in this table are running and set to Automatic, and then try WIA again.

Service to checkNeeded setting
DCOM Server Process LauncherRunning, Automatic
Remote Procedure Call (RPC)Running, Automatic
RPC Endpoint MapperRunning, Automatic
Shell Hardware DetectionRunning, Automatic

Reinstall the driver or switch to the HP app in Windows

HP offers two reset routes, and you only need one of them.

For the first, disconnect the USB cable, open Add or remove programs, uninstall your HP printer, restart, and install the HP app from 123.hp.com.

If the printer is not in that list, open Printers & scanners, click the printer and choose Remove device.

For USB printers, you can instead open Device Manager, expand Imaging Devices, right-click the printer and choose Uninstall device.

Remove any other copies listed under Imaging Devices and Printers, restart, and download the latest driver from 123.hp.com.

HP warns not to plug in the USB cable until the installer asks for it.

Check how the printer is connected

ConnectionWhat HP says to check
WirelessPrinter and computer on the same network; printer awake; Wireless light on, not off or blinking
WiredUndamaged Ethernet cable in a different router port; steady green port light; report shows Network Status Ready
USBReinstall the driver through Device Manager as described above

If the wireless light is off or blinking, HP says the printer is disconnected from the network and should be reconnected with the Wireless Setup Wizard or WPS.

See our guide to reconnecting an HP printer to Wi-Fi for those steps.

Print a Network Configuration Report

The report confirms whether the printer is really on your network.

In the HP app, click the printer, open Printer Reports under Tools and pick Network Configuration Report.

On touchscreen printers, open the Wireless or Network Settings menu and choose the same report.

HP says the Network Status should read Ready, and the report may include instructions for any problem it finds.

Reset the printing system on a Mac

HP warns that this removes every printer and scanner and clears print jobs and saved settings, so you must add them again.

  1. Open Printers & Scanners from Spotlight.
  2. Right-click, or Control-click, in the Printers list and select Reset printing system.
  3. Restart the printer.
  4. Click Add Printer, Scanner, or Fax, select your printer and click Add.

Remove old HP software on a Mac

  1. Download and install HP Easy Start from 123.hp.com/setup.
  2. In the HP Easy Start drop-down menu, select Uninstall HP Software.
  3. Follow the prompts to remove all HP software.
  4. Install the HP app from 123.hp.com or your app store and reconnect the printer.

Symptoms HP groups under scanner problems

HP’s scanner-issues page treats all of these as the same family of faults, so the steps above apply to each one.

  • The computer cannot communicate or connect with the scanner.
  • The computer cannot find HP Scan.
  • The printer will not scan to a computer or to email.
  • The Scan button does not work.
  • The scanner keeps disconnecting or freezing.
  • The computer is not found on the scanner.

HP says it can also help through its Virtual Assistant on the same page, which covers topics such as offline printers, wireless networking and cartridges.

Wake the printer before you test

HP notes that a printer in sleep mode can display Offline when it is actually ready.

Touch the control panel or press the Power button, and wait for the ready state before you start a scan.

Restarting the printer and the computer is also on HP’s list, because it clears error conditions that block the scanner connection.

If printing is also stuck, read how to fix an HP printer that shows offline.

Mac users may also find this Mac printer communication guide useful.

Sources: HP: Scanner not found or connected and HP: Scanner issues.

Leave a Reply

Your email address will not be published. Required fields are marked *