How To Stream From Android To AirPlay Devices (2026)
Android has no built-in AirPlay, so your phone does not show up as a source when you try to stream to an Apple TV or AirPlay speaker.
You can still get there with a third-party app or a different casting protocol.
This guide sorts the options by what you want to send, music or video, and takes about 10 minutes to set up.
Which method works for what you want to stream?
| You want to send | Method | Android version | Main limit |
|---|---|---|---|
| Music or any app audio | AirMusic | Android 10+ without root | Audio only, AirPlay 1 only |
| Video and photos from the phone | A cast app such as LocalCast or AllCast | Check each app’s Play listing | Third-party apps can break after Apple updates |
| Full screen to a TV | Google Cast through Google Home | Android 8.0+ | TV must support Cast, not AirPlay |
Why does Android not support AirPlay?
AirPlay is Apple’s own protocol, and Apple has not shipped an Android sender.
Third-party apps get around that with reverse-engineered code, which is why results vary.
Apple can break these apps.
In March 2017, tvOS 10.2 stopped third-party apps from streaming to Apple TV until doubleTwist shipped a fix in April 2017.
Step 1: check the Apple TV AirPlay settings
Do this first, because a restrictive setting blocks every Android app.
- On the Apple TV, open Settings.
- Select AirPlay and Apple Home (older tvOS versions call it AirPlay and HomeKit).
- Select Allow Access and pick an option from the table below.
| Allow Access option | Who can stream | Works for Android? |
|---|---|---|
| Everyone | Any device | Yes |
| Anyone on the Same Network | Devices on your Wi-Fi | Yes |
| Only People Sharing This Home | People added in the Apple Home app | Only if you are added to the home |
Also check Require Password, since it forces a password prompt on every new sender.
Which other Apple TV settings block a connection?
Apple’s support pages name a few settings worth checking when the Apple TV will not accept a stream.
- AirPlay switch: in Settings, open AirPlay and Apple Home and make sure AirPlay is turned on.
- Allow Access: the options above decide who can connect, and Also Allow Nearby to AirPlay is listed alongside them.
- Cropped picture: turn on AirPlay Display Underscan to show the full image, and turn it off if you see black bars.
Apple says the Apple TV and the sending device may need to share a network, so recheck Step 2 if a setting change does not help.
Step 2: put both devices on the same Wi-Fi
Google’s help pages say to match the network name (SSID) on the phone and the receiver.
On the phone, open Settings, then Network & internet, then Internet, and check which network says Connected.
Turn off AP isolation (client isolation) on the router if the devices cannot see each other, and note that guest, hotel and public networks often block this.
Step 3: stream music with AirMusic
AirMusic captures audio from other apps and sends it to AirPlay, DLNA, Google Cast and Sonos receivers.
On Android 10 or later it works without root.
- Install AirMusic from Google Play and try the free trial first.
- Open General Settings, then Select Your Audio-Source.
- Choose Native recording (experimental).
- Go back to the main tab, pick your AirPlay device and tap Start now.
- Open your music app and press play.
On a rooted phone: choose Via Root: All internal audio instead, which covers apps that block native recording.
What AirMusic cannot do
- Video: it sends audio only.
- AirPlay 2: it relies on AirPlay 1, so AirPlay 2 features are not available.
- Delay: expect a buffer of about two seconds when you start, skip or pause.
- Trial noise: reviewers report added noise after 10 minutes in the trial version.
- App support: some music apps do not work with native recording.
Step 4: stream video with a cast app
LocalCast and AllCast are the two apps most guides name for sending video to an Apple TV.
Open the app, pick a file, then choose your Apple TV from the device list.
Read the current Google Play reviews and last-updated date before installing, because tvOS changes can break these apps.
Step 5: cast to a TV that supports Google Cast
If the TV has Chromecast built in, skip AirPlay entirely.
- Install and open the Google Home app.
- Touch and hold the tile for your TV or display.
- Tap Cast, then Cast my screen (or Cast one app, if offered).
Google lists Android 8.0 or later as a requirement and asks you to allow the microphone permission for Google Play Services.
See our list of TVs with Chromecast built in if you are shopping.
Galaxy owners can also use Samsung’s own tools, covered in our Galaxy S25 casting guide.
How do you fix stuttering or no device found?
| Symptom | Try this |
|---|---|
| Receiver not listed | Match the Wi-Fi network name and turn off AP isolation |
| Choppy video | Stay within 15 feet (4 meters) of the receiver and keep the receiver close to the router |
| Lag or drops | Put both devices on the same band, 2.4 GHz or 5 GHz |
| Password prompt on the TV | Turn off Require Password or enter the on-screen code |
| Music app plays silently | Switch AirMusic to a different audio source or use root mode |
| Cast volume too low | Adjust it in the Google Home app on the device tile |
What if nothing works?
Use a cable or a Cast-capable stick for the TV, since both skip AirPlay.
Apple’s AirPlay requirements page and Google’s casting tips list the official checks for each side.
For a similar problem on the Samsung side, see screen mirroring on a Galaxy S23.
Under limitations you should say whether it is possible to browse the web.