How To Fix OontZ Angle Solo Will Not Charge Problem

The OontZ Angle Solo will not charge issue can be caused by different factors. It could be because of a glitch in the speaker firmware, a faulty charger, or a defective battery. To fix this you will need to perform a series of troubleshooting steps on the device.

The OontZ Angle Solo is a portable Bluetooth speaker that has an exceptionally loud volume for its small size. This speaker will easily fit in any bag allowing you to bring it to any of your outdoor activities. Some of its features include a rugged design and a 10 hour battery play time just to name a few.

Technical specifications of the OontZ Angle Solo:

  • Crystal Clear Distortion-Free Sound
  • Bluetooth 4.2, Play up to 100 feet from your audio device
  • 5 watts of peak output power exceptionally loud volume
  • IPX5 Certified Water Resistant
  • Amazingly light under 8 ounces
  • 3.9 Inches long 2.8 inches high and 2.75 inches wide
  • Connects quickly over Bluetooth to your iPhone, Smartphone, and Tablet

What to do when your OontZ Angle Solo won’t charge

One problem that you might encounter with your Move smart speaker is when you can’t charge it. This can be an annoying issue especially if the speaker is running low on power as you won’t be able to use it. Here are the troubleshooting steps you need to do to fix the problem.

Solution 1: Perform a factory reset on the OontZ Angle Solo

The first troubleshooting step you should consider doing is a factory reset or hard reset. This procedure will wipe out the data on the Bluetooth speaker and bring it back to its default settings. This is a useful procedure to do when you are experiencing problems with the device.

Time needed: 2 minutes.

Reset the speaker

  1. Remove the Micro USB charging cable if connected.

    This ensures that the device will not be charging.Fix OontZ Angle Solo Will Not Charge Problem

  2. Press and hold down the Power Button and + button for a second, then release.

    This will reset the speaker to its default factory settings.What to do when your OontZ Angle Solo won't charge

  3. Turn on the device.

    You can do this by pressing on the power button.Turn on

Try to check if you can charge the Bluetooth speaker.

Solution 2: Dirt present in the charging port

Sometimes dirt or debris present in the charging port of the speaker will prevent it from being charged. Inspect the charging port of the speaker and if you find any present then you can clean this off using a toothpick or you can try blowing into it until it gets removed. Once done, check if you can charge the speaker.

Solution 3: Replace the charger to fix will not charge issue

Sometimes the problem can be caused by a defective charger. It’s cord might be damaged or the wall charger itself might not be working. If you are using an Android phone with a microUSB charger then you can use this to charge your speaker. If the charging works then your speaker charger is what’s causing this problem.

Solution 4: Defective OontZ Angle Solo battery

There’s a possibility that the battery of the speaker is defective. If this is the cause of the problem then replacing the battery will fix this. It’s recommended that you have this done at a service center. Some reasons as to why a battery will get damaged is repeated overcharging or constant exposure to heat such as when you leave the speaker under the sun.

Solution 5: Defective circuit board

There’s a possibility for the internal circuit of this speaker to get water damaged. If this is what’s causing the problem then you will need to have this fixed at a service center.

Having charging issues on your Bluetooth speaker can be a frustrating experience. Hopefully, this solution will help you fix the problem.

Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.

Also Read: