|

How To Fix Galaxy Buds Not Charging Or Turning On (2026)

Your Galaxy Buds will not charge, or they will not power on after sitting in the case.

Samsung traces most of these cases to the charger, dirty contacts, or an earbud that is not seated properly, so the cause is often simple.

Work through the steps in order and allow about 30 minutes, because a fully drained case needs time to wake up.

Quick answer: match your symptom to a fix

SymptomWhat it can meanTry this first
Case light flashes redExternal power was cut offReconnect the charger and charge for at least 10 minutes
Earbud light is black or flashes redTips, wingtips or contacts may be the problemCheck the tips and wingtips, clean the contacts, reinsert the buds
Earbuds will not turn onThey may need a restartPut them in the case and take them out after 7 seconds or more
Case ignores a wireless padCase is off-center or has a cover on itCenter the case on the pad and remove the cover
Only one earbud chargesOne bud may be damagedInspect both buds for cracks, dents or loose parts

Why do Galaxy Buds stop charging?

Samsung lists these common causes for Buds, Buds+, Buds Live, Buds Pro, Buds2, Buds2 Pro, Buds FE, Buds3 and Buds3 Pro:

  • Damage to the case or an earbud, including cracks.
  • Non-approved chargers or cables.
  • Loose ear tips or wingtips that stop the buds from seating.
  • Dirty contacts from dust, earwax or sweat.
  • Low charge or too little charging time.
  • Water or liquid exposure.

Step 1: Use the right charger and cable

Use the USB cable that came with the buds and a Samsung-approved wall adapter, which is sold separately.

Test the same cable and adapter on another device to rule them out.

Charging from a computer works, but Samsung says the lower current makes it slower.

Charging methodDetail from Samsung
USB cable and wall adapterSamsung-approved adapter, plugged straight into an outlet
Qi wireless padClose the lid and place the case in the center of the pad
Wireless PowerSharePlace the case against the back of a supported Galaxy phone
Computer USB portWorks, but charges more slowly

Step 2: Fix wireless charging problems

  1. Remove any case cover, because covers can block wireless charging.
  2. Center the closed case on the pad.
  3. For PowerShare, swipe down with two fingers, open Quick settings and tap Wireless PowerShare.
  4. Place the case against the back of the phone.

If the pad works for a phone but not the case, switch to the USB cable.

Step 3: Reseat the earbuds and check the tips

If the earbuds are not fully in their slots, the charging contacts will not connect.

Remove each bud, confirm the ear tips and wingtips are attached, then put the buds back in the correct sides.

Step 4: Clean the charging contacts

Wipe the contacts on the buds and inside the case gently with a dry microfiber cloth.

Samsung also says to clear sweat or liquid from the terminals, because it can corrode them.

Step 5: Give a drained case time to wake up

  • If the buds or case are completely drained, Samsung says to allow 20 to 30 minutes before they turn on.
  • If the case lights do nothing, unplug and reconnect the charger, then charge the case for at least 10 minutes.
  • Charge the case fully before you put the earbuds in it.

What do the indicator lights mean?

LightColor and patternMeaning
EarbudRedCharging
EarbudGreenFully charged
EarbudFlashing redCharging is disabled by an error or abnormal temperature
CaseRedCharging, or below 30%
CaseFlashing redBelow 10%
CaseYellow30% to 60%
CaseGreenAbove 60% or fully charged
CaseBlueFirmware update in progress

Some warmth during charging is normal, but if the case or buds overheat, unplug them and let them cool first.

Step 6: Restart the earbuds

Galaxy Buds cannot be powered off, so the restart is done through the case.

  1. Place each bud in its slot in the case.
  2. Wait at least 7 seconds.
  3. Take the buds out and check for a response.

If the touchpads are unresponsive, Samsung says to do this and then clean the sensors.

Step 7: Reset the buds and update the software

On One UI 8.0 or later, open Settings, tap your Galaxy Buds, tap Manage connections, then tap Reset twice.

On older One UI versions, use the Wearable app and the same Manage connections path.

Samsung says both earbuds need at least 15% battery before a reset, so charge them first.

Then open Earbuds software update in the same menu and tap Download and install.

Samsung support also lists outdated firmware as a possible charging cause on Buds3 and Buds3 Pro.

How much does a short charge give you?

If the buds turn on but die quickly, a few minutes in the case buys limited time, according to Samsung.

ModelShort charge in the casePlay time Samsung lists
Galaxy Buds210 minutesUp to 150 minutes
Galaxy Buds Pro10 minutesUp to 85 minutes
Galaxy Buds Live5 minutesUp to 1 hour
Galaxy Buds+10 minutes3 hours
Galaxy Buds15 minutesUp to 1.7 hours

Which habits cause charging faults?

  • Do not use a case from a different model.
  • Do not bend the charger or keep using a damaged one.
  • Charge both buds in the case together, because Samsung says battery life differs when they are charged separately.
  • Clean sweat off the terminals after workouts.
  • Keep the case away from extreme heat or cold, which Samsung says can affect battery performance.
  • Look inside the case for debris that could block the contacts.
  • Try a second Samsung-approved charger or wireless pad before blaming the buds.
  • Use only Samsung-approved accessories, because others can cause damage and affect the warranty.

When to contact Samsung

If the charger and accessories are undamaged and nothing works, call 1-800-SAMSUNG.

You can also use chat at Samsung contact support or the Samsung Members app.

Samsung says damaged earbuds or cases are not covered by the warranty and must be replaced.

If the buds charge but go missing or drop their connection, see our guides on Galaxy Buds not connecting, charging Galaxy Buds and finding lost Galaxy Buds.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *