Epson Printer Error: Turn The Power Off And On Again (2026)

If your Epson printer shows “Printer error. Turn the power off and on again,” the screen is describing a general fault that Epson says to clear with a restart.

Epson’s support pages give a short, fixed order of steps for this message, and the order is the same across its inkjet lines.

This guide follows those pages and shows how the wording and the codes differ by model.

Quick answer: what to do first

StepWhat Epson says
1Turn the printer off, then turn it on again
2If the message returns, check inside the printer for jammed paper
3On some models, also look for protective packing material and remove it
4If there is no jam or packing material, contact Epson support

Epson’s pages describe this as a general printer error, so the message itself does not name the part that failed.

If the screen is dark

Epson notes that a dark screen can be a printer in sleep mode rather than a fault.

On the ET-2840 page, Epson says to press any button on the control panel to wake the product.

On the WorkForce Pro WF-C5710 page, Epson says to touch the screen to wake it, then press the Job/Status button and select Printer Status to see the message again.

Restart the printer the way Epson describes

  1. Turn the printer off with its power button.
  2. Turn it on again.
  3. Wait for the screen to show whether the message is gone.

On the ET-2840 page, Epson’s generic version of this message adds a step for wireless printers: turn the wireless router off and on again.

The same page says that if the message stays, you should note the error code and contact Epson support.

Check for a paper jam or packing material

Every Epson page for this message says the next step is to check for a paper jam.

The WF-C5710 and WF-3720 / WF-4730 pages add protective packing materials, and tell you to remove any you find.

The XP-970 page uses the phrase “protective material” for the same check.

If you do find a jam, our guide to an Epson paper jam or paper not feeding covers the clearing steps.

How the message is worded on different models

Epson pageMessage or codeEpson’s action
ET-2840 / L3560E-01 (printer error)Turn off and on; check inside for a jam; if none, contact Epson
ET-2840 / L3560E-02 (scanner error)Turn the product off and on again
ET-2840 / L3560W-01 (paper jam)Remove the jammed paper and press the button shown on the screen; if it stays, turn off and on
WF-7820 / WF-7840Printer error. Turn the power off and on againPower off and on; check for a jam; if none, contact Epson
XP-970Printer error. Turn on the printer againTurn off and on; check for a jam or protective material; if none, contact Epson
WF-C5710 / WF-C5790Printer error. Turn the power off and on againPower cycle; remove jammed paper or packing material; contact Epson if it stays

Your own model’s wording may differ slightly, so match the message on your screen to the closest row.

Error codes 000181 and 000184

The WF-C5710 / WF-C5790 page is the only one of these pages that names numeric codes.

If error code 000181 or 000184 appears with the message, Epson says to confirm that you have not exceeded the loading capacity of any paper source.

CodeEpson’s check
000181Make sure no paper source is loaded past its capacity
000184Make sure no paper source is loaded past its capacity

Epson’s page does not say how many sheets each tray holds, so check your printer’s own specifications for that limit.

E-02: the scanner error

On the ET-2840 page, E-02 is listed as a scanner error, and the fix Epson gives is the same restart.

That page gives no further step for E-02, so if it comes back after a restart, contact Epson support.

Two other “Printer error” messages

Epson’s WF-7820 and WF-C5710 pages list two related messages that are not cleared by a restart alone.

MessageWhat Epson says
Printer error. Contact Epson Support. Non-printing features are available.The printer may be damaged; features that do not print, such as scanning, still work; contact Epson
Printer error. For details, see your documentation.The printer may be damaged; contact Epson

If the message names a paper cassette

The WF-C5710 page has a separate message: “Cannot print because XX is out of order. You can print from another cassette.”

Epson says to turn the printer off and on, then reinsert the cassette named in the message.

If that message remains, Epson says to contact support, and you can keep printing from another cassette meanwhile.

A “Recovery mode” message means a failed firmware update, not a general error, and it has its own fix in our Epson Recovery Mode guide.

A borderless-printing ink pad message is also separate, and our Epson ink pad end of service life guide explains it.

If the printer starts but your computer cannot reach it, try our Epson printer offline guide instead.

When to contact Epson

Epson’s answer on every page above is the same: if the message remains after a restart and a check for jams or packing material, contact Epson support.

Have your model name and the exact message or code ready, since the wording and codes differ by model.

Official Epson sources

Leave a Reply

Your email address will not be published. Required fields are marked *