How To Fix Slow eero Wi-Fi Speeds (2026)

Slow speeds on an eero network come from one of three places: your internet provider, the primary eero, or the Wi-Fi path to your devices.

Eero’s support articles walk through each one in order, so you can stop as soon as speeds recover.

This guide follows those steps for both network-wide slowdowns and a single slow room or device.

Quick answer: where to start

What you seeLikely areaStart with
Every device is slowBetween the provider and the primary eeroApp speed test, then a direct modem test
One device is slowThat device or its connectionCheck which eero it joined
One room is slowThe nearest eero or its placementMove or add an eero
Wired device is slowCable, port, or adapterSwap the Ethernet cable

Confirm whether the whole network is slow

Test at least two devices connected to the primary eero.

If only one is slow, the problem is that device or its connection rather than the network.

If several are slow, continue with the provider checks below.

Run the speed test in the eero app

  1. Open the eero app and tap Internet on the Home tab.
  2. Tap Run speed test.
  3. Wait about a minute for the download and upload results.

The app also runs a test automatically every 1 to 3 days.

Those results measure the link between your gateway eero and a test server, so they do not show your Wi-Fi speed.

If the result matches your plan, the provider connection is fine and you can jump to the primary eero checks.

Test straight from the modem

This isolates your provider and modem from the eero network.

  1. Unplug the Ethernet cable from the primary eero.
  2. Plug it directly into a computer.
  3. Run a test with a tool such as fast.com or speedtest.net.

Normal speeds mean the provider is fine, so power cycle the modem and reconnect the eero.

Low speeds point to the cable or to the provider and modem, so swap the Ethernet cable first.

Power cycle the modem the right way

  1. Unplug the modem’s power cable from the wall.
  2. Wait 2 to 3 minutes, because a shorter wait may not clear the issue.
  3. Plug it back in and wait for the lights to return to normal.
  4. Test again directly from the modem.

If speeds are still low, eero says to contact your internet provider.

Fiber customers with an ONT may not be able to power cycle it, so eero suggests asking the provider to reset it remotely.

Check the primary eero

If the provider tests fine but devices are still slow, connect a computer directly to the primary eero with Ethernet and test again.

Normal speeds over the cable point to an environmental cause, so move on to placement.

Low speeds over the cable call for these steps, testing after each one.

  1. Unplug the primary eero for 30 seconds, then plug it in and wait about a minute for solid white.
  2. Swap the Ethernet cable between the modem and the primary eero.
  3. Temporarily put another eero in the primary position to rule out a hardware fault.

How obstacles affect the signal

ImpactMaterials
HighConcrete, brick, stone, metal appliances
MediumTile, plaster, large furniture
LowDrywall, wood, glass

Any object on the straight line between an eero and a device weakens the signal.

Exterior walls are generally thicker and denser than interior walls, so coverage through them can drop a lot.

Fix eero placement

  • Move eeros out of closets, cabinets, and from behind TVs.
  • Keep them away from microwaves, refrigerators, and tiled bathrooms with plumbing.
  • Give them a clear path to where devices are used most.
  • Add an eero between a poor area and the nearest eero if the weak spot persists.

If only one area is slow

  1. Look for interference near the eero, such as microwaves, baby monitors, and cordless phones.
  2. Check that a wireless eero gets a strong signal from the rest of the network.
  3. Test speeds right next to the eero, because fast results there mean too many obstacles in between.
  4. Swap the eero with one from a location that works well to see whether the problem follows the unit.
  5. If moving it does not help, add an eero to cover that area.

If only one wireless device is slow

  1. In the app, confirm the device connects to the nearest eero.
  2. If it joined a farther eero, turn its Wi-Fi off, wait 5 seconds, and turn it on.
  3. If it still picks a farther eero, forget the network and reconnect.
  4. Check the device supports the speeds you expect, since older Wi-Fi standards are slower.
  5. Look for heavy activity such as game downloads, cloud syncing, or several streams.
  6. Test a second device in the same spot to see whether the first device is the limit.

If a wired device is slow

CheckWhat eero says
Cat5 cableLimited to 100 Mbps
Cat5e cableMost support up to 1 Gbps
Faster devices and eerosUse Cat6 or higher
Device adapterA 100 Mbps adapter caps speeds regardless of cable or eero

Also try another Ethernet cable, another port on the eero, and the same cable on a different eero to rule out a faulty port.

Turn SQM off while you test

Eero recommends switching SQM off before troubleshooting a single area or device.

Open Settings, tap Network settings, tap SQM, and toggle it off, then turn it back on afterward.

When you test, run 2 or 3 tests on at least two servers, such as speedtest.net and fast.com, and average the results.

If a smart device struggles on your Wi-Fi, see the best Wi-Fi settings for a Ring doorbell.

To weigh mesh options, read Netgear Orbi vs eero.

Network-wide outages are covered in how to fix an offline eero network.

When to contact eero support

If none of the primary eero steps restore speeds, eero tells you to contact its support team.

Contact options are at eero.com/support/contact-us, and a ticket can be opened at eero.com/support/issue-ticket.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *