How To Fix A Red Light On Your eero (2026)
A red light on an eero means the unit has lost its internet connection.
The fix depends on whether one eero or the whole network is red.
This guide follows eero’s own support articles for each LED state and reset method.
Quick answer: what each eero light means and what to do
| LED | What eero says it means | First thing to try |
|---|---|---|
| Solid red | The eero is not getting an internet connection | Unplug it for 30 seconds, then plug it back in |
| Flashing blue | The eero is searching for an internet connection | Check the modem and the Ethernet cable to the gateway |
| Flashing yellow | The eero is not getting enough power | Use the power adapter and cable that came with it |
| Solid white, no internet | The eero is online but devices cannot reach the internet | Power cycle, then soft reset |
What a solid red LED means
Red tells you the eero cannot reach the internet, not that the hardware has failed.
If every eero in your home shows red, eero says the upstream connection is probably not reaching your Primary eero.
In that case, skip to the network-offline steps in eero’s separate offline article instead of working on a single unit.
If only one wireless eero is red
- Unplug the eero for 30 seconds, then plug it back in.
- If red returns, move it closer to another eero in your network.
- Soft reset the Primary eero.
- Connect the red eero to another eero with an Ethernet cable.
Moving it closer matters because a wireless eero reaches the internet only through the eeros around it.
Test a wired eero’s Ethernet connection
Eero suggests a quick test to learn whether the eero, the cable, or the port is at fault.
- Disconnect the Ethernet cable from the red eero.
- Plug that same cable into a laptop or computer.
- Check whether the computer can get online.
What the cable test result tells you
| Computer result | Likely cause | Next steps |
|---|---|---|
| Has internet | The eero | Power cycle it, try another Ethernet port or cable, then soft reset |
| No internet | Cable, port, or the internet connection | Try another cable, then another port, then confirm the Primary eero is online |
As a temporary workaround, you can unplug the cable and place the eero within range of another eero.
That does not repair the wired problem, so treat it only as a stopgap.
The eero PoE Gateway does not support wireless connections, so it must stay on Ethernet or PoE.
Flashing blue: still looking for a connection
Blue flashes during first-time setup while the eero waits to pair with the app.
It also appears after a soft reset when there is no internet, because the eero keeps trying to reconnect.
If the connection is down, eero notes the light stays blue until service returns, so fixing the modem is the real task.
- Confirm the modem is online.
- Check the Ethernet cable between the modem and the gateway eero.
- Unplug the modem for 30 seconds, then plug it in.
- Wait 2 to 3 minutes, then follow the prompts in the eero app.
Flashing yellow: a power problem
Eero monitors the power it receives and flashes yellow when the source falls short.
For a USB-C powered eero, the listed causes are a third-party cable, a non-eero adapter, or a damaged or loose connection.
For a PoE eero, the causes are a switch or injector that does not meet its requirements, or a damaged Ethernet cable.
- Reconnect using the adapter included with the eero.
- Press the cable firmly into the eero and the outlet, or try another outlet.
- On PoE, try a different port on the switch and test with the included adapter if you have one.
The PoE Gateway shows solid yellow for power problems rather than flashing yellow.
Solid white but devices have no internet
Eero says a solid white light generally means the eero is online while devices still cannot get through.
Power cycle first, waiting 30 seconds and then about 2 minutes after plugging back in.
If that fails, do a soft reset, which keeps your network name, password, and settings.
Reboot and reset methods compared
| Method | How | Result |
|---|---|---|
| Reboot in the app | Home tab, tap the eero, three dots, Restart | Restarts that eero; restarting the gateway takes the whole network offline |
| Restart network | Settings, Advanced networking, three dots, Restart Network | Whole network goes offline briefly |
| Soft reset | Hold the reset button until the LED flashes yellow, no longer than 8 seconds | Reboots, returns to the default channel, and keeps logs and advanced settings |
| Hard reset | Hold the reset button until the LED flashes red, about 15 seconds | Factory resets, clears data, and removes the eero from the network |
Before any reset, eero says to keep the unit powered on for at least 90 seconds with an internet connection.
What to expect after a reset
A flashing white LED is normal on boot while the eero connects to the cloud, which can take up to two minutes.
After a soft reset, solid white with an online status in the app means the connection is restored.
Flashing blue or solid red after two minutes usually points to no internet, so return to the modem checks above.
After a hard reset, flashing blue that stays blue means the eero is ready to be set up again in the app.
Where the reset button is
| Model | Location |
|---|---|
| eero (1st gen) | Back, inset pinhole |
| eero Pro | Back, small oval button |
| eero Beacon | Side, small oval button |
| eero, eero 6, 6 extender, 6+, Pro 6, Pro 6E, eero 7 | Bottom, recessed oval button |
| eero PoE 6, PoE 7 | Back, remove from the mounting bracket first |
| eero PoE Gateway | Back, small circular button |
| eero Max 7, eero Pro 7 | Back, small oval button |
| eero Outdoor 7 | Bottom, recessed oval button |
Related network guides
If you are comparing systems, see eero vs Google Nest for how the mesh options differ.
Owners of another brand with a satellite problem can read how to fix an Orbi satellite that is not syncing.
A router that shows no connection at all is covered in how to fix a Netgear router with no internet.
When to contact eero support
Eero says that if replacing the cable or switching ports does not clear a red LED on a wired eero, its support team can troubleshoot further.
Contact options and support tickets are listed at eero.com/support/contact-us, and warranty details are at eero.com/legal/warranty.