How To Start Windows 11 In Safe Mode (2026)
Safe mode starts Windows 11 with only a limited set of files and drivers, which helps you find what is causing a problem.
The quickest route is Settings > System > Recovery, then Restart now next to Advanced startup.
From the blue recovery screen you pick Troubleshoot, Advanced options, Startup Settings and Restart, then press 4 for safe mode.
Quick answer: three ways into safe mode
| Situation | How to reach the recovery screen |
|---|---|
| Windows works normally | Start > Settings > System > Recovery, then Restart now next to Advanced startup. |
| You can reach the Power button on screen | Hold Shift while you select Power > Restart. |
| Windows will not start | Interrupt startup with the power button twice, then choose Advanced options on the Automatic Repair screen. |
Every route ends on the same blue screen, which Microsoft calls the Windows Recovery Environment, or Windows RE.
- Troubleshoot
- Advanced options
- Startup Settings
- Restart
- Press 4
Before you start: BitLocker key
Microsoft warns that if your device is encrypted, you need your BitLocker recovery key to complete these steps.
Find the key before you restart, so you are not locked out halfway through.
If you are not sure whether the drive is encrypted, see our guide to device encryption and BitLocker in Windows 11.
Start safe mode from Settings
- Select Start, then Settings.
- Select System, then Recovery.
- Under Recovery options, find Advanced startup and select Restart now.
- When the blue screen appears, select Troubleshoot.
- Select Advanced options, then Startup Settings.
- Select Restart.
- On the Startup Settings screen, press 4 or F4 for safe mode.
Save your work first, because the PC restarts as soon as you select Restart now.
Start safe mode with Shift and Restart
- Open the Power menu.
- Hold the Shift key and select Restart.
- Wait for the blue recovery screen.
- Select Troubleshoot > Advanced options > Startup Settings > Restart.
- Press 4 for safe mode or 5 for safe mode with networking.
This is the method to use when Settings will not open.
Start safe mode when Windows will not boot
Microsoft says Windows opens the recovery screen by itself after it fails to start correctly several times.
You can also force it with the power button.
- Turn the PC on.
- Before Windows finishes loading, hold the power button until the PC shuts down.
- Do the same thing a second time.
- Turn the PC on a third time and wait for the Automatic Repair screen.
- Select Advanced options.
- Select Troubleshoot > Advanced options > Startup Settings > Restart.
- Press 4 for safe mode.
Microsoft notes that some PCs also have a dedicated recovery button or button combination set up by the manufacturer.
What each Startup Settings option does
You choose an option with the number keys or with the function keys F1 to F9.
| Key | Option | What it does |
|---|---|---|
| 1 | Enable debugging | An advanced troubleshooting mode meant for IT professionals and administrators. |
| 2 | Enable boot logging | Creates a file named ntbtlog.txt that lists the drivers installed during startup. |
| 3 | Enable low-resolution video | Starts with your current video driver at a low resolution and refresh rate so you can reset display settings. |
| 4 | Enable Safe Mode | Starts Windows with a limited set of files and drivers. |
| 5 | Safe Mode with Networking | Safe mode plus the network drivers and services needed for internet access. |
| 6 | Safe Mode with Command Prompt | Safe mode with a Command Prompt window instead of the usual desktop. |
| 7 | Disable driver signature enforcement | Allows drivers with improper signatures to install. |
| 8 | Disable early launch anti-malware protection | Temporarily turns off the protection that starts before other boot drivers. |
| 9 | Disable automatic restart on system failure | Stops Windows restarting after an error, for PCs stuck in a fail-and-restart loop. |
Press Enter on that screen instead if you want to start Windows normally.
Safe mode or safe mode with networking
| Choose | When |
|---|---|
| Safe mode (4) | You want the most basic state, with no network access. |
| Safe mode with networking (5) | You need the internet or other computers on your network while you troubleshoot. |
| Safe mode with Command Prompt (6) | You plan to work with commands and do not need the desktop. |
Networking mode is the practical choice if you need to download a driver or read instructions online.
What safe mode tells you
Microsoft explains that if a problem does not happen in safe mode, the default settings and basic device drivers are unlikely to be the cause.
That points to something loaded only in a normal start, such as an app that runs at startup or a device driver.
Our guide to turning off startup apps in Windows 11 covers the first of those.
If the PC crashes with a stop code, the Windows 11 blue screen guide is the next place to look.
How to exit safe mode
Restart the PC and it should return to a normal start.
If it keeps starting in safe mode, Microsoft gives these steps.
- Press Windows key + R.
- Type msconfig in the Open box and select OK.
- Select the Boot tab.
- Under Boot options, clear the Safe boot checkbox.
- Select OK and restart the PC.
If the recovery screen never appears
Microsoft lists a USB recovery drive and Windows installation media as two more ways into Windows RE.
- A recovery drive you created earlier starts straight into the recovery screen when you boot from it.
- Installation media made with the Media Creation Tool on a working PC shows a setup screen first.
- On that setup screen, choose your language, select Next, then select Repair my PC.
If the setup screen does not appear, Microsoft says to change the boot order in your PC maker’s settings.
Other tools on the same recovery screen
Safe mode is only one of the tools under Advanced options.
- Startup Repair diagnoses and fixes common problems that stop Windows starting.
- System Restore rolls back system files and settings but not personal files.
- Uninstall Updates removes recently installed Windows updates.
- Reset this PC returns the PC to factory settings, with a choice to keep or remove personal files.
If nothing else works, our guide to resetting Windows 11 and keeping your files walks through that last option.