How To Fix Apple Watch Not Unlocking Your Mac Or iPhone (2026)

When your Apple Watch stops unlocking your Mac or iPhone, the cause is usually a missing requirement such as the watch being locked, Bluetooth being off, or the wrong Apple Account.

Apple lists the same short set of conditions for both devices, so you can check them in a few minutes.

This guide uses Apple’s support pages and security documentation to walk through each one.

Quick answer: what to check first

CheckMaciPhone
Watch is on your wrist and unlockedRequiredRequired
Watch has a passcodeRequiredRequired
Same Apple Account with two-factor authenticationRequiredRequired
Wi-Fi and Bluetooth onRequiredRequired
Feature switched on in settingsSystem Settings, Touch ID & PasswordSettings, Face ID & Passcode
Face covering neededNoYes, mask, sunglasses or ski goggles

What the feature actually does

On a Mac, Apple says Auto Unlock logs you in when you wake the Mac while wearing your unlocked watch nearby.

On an iPhone, the watch unlocks the phone only when you wear a mask covering your mouth and nose, or sunglasses or ski goggles covering your eyes.

If you are wearing nothing over your face and the iPhone still asks for Face ID or a passcode, that is how Apple designed it.

Turn it on for your Mac

Apple says the setting lives in System Settings on macOS Ventura 13 or later.

  1. Open the Apple menu and choose System Settings.
  2. Click Touch ID & Password, which may be called Login Password on some Macs.
  3. Turn on the switch next to your watch’s name in the Apple Watch section.

On earlier macOS versions, Apple says to open System Preferences, click Security & Privacy, and select the option to use your Apple Watch to unlock apps and your Mac.

Mac requirements

Apple says your Mac and Apple Watch must be signed in to the same Apple Account with two-factor authentication.

Wi-Fi and Bluetooth must be on, and the watch must use a passcode.

Apple’s security guide adds that the Mac must already have been unlocked another way after you put on and unlocked the watch.

That is why Apple says your first login after you restart, log out or turn on the feature needs your password.

If the Mac still will not unlock

  1. Wear the watch, unlock it, and bring it very close to the Mac.
  2. Turn the Apple Watch switch off in System Settings, restart the Mac, then turn it back on.
  3. Install the latest macOS and watchOS updates.
  4. Make sure the Mac is not using internet sharing or screen sharing, which are off by default.

Apple’s security guide says the watch must be within about 2 to 3 meters and must not be in bedtime mode.

Approving admin requests on the Mac

With Auto Unlock on, Apple says you can double-click the side button on the watch when the Mac asks for an administrator password.

The Mac then enters the password for you, and Apple notes the same setting controls both unlocking and approving.

If the double-click does nothing, check that the switch above is on and that the watch is unlocked.

Turn it on for your iPhone

Apple’s mask guide says the iPhone needs Face ID, which means an iPhone X or later, running iOS 14.5 or later.

  1. Open Settings on the iPhone.
  2. Tap Face ID & Passcode and enter your passcode.
  3. Scroll to Unlock with Nearby Devices and turn on the switch for your watch’s name.

Apple’s watch guide calls the same switch Unlock With Apple Watch, and says to turn it on for each watch if you have more than one.

If wrist detection is off on the watch, Apple says the iPhone asks you to turn it on.

iPhone requirements

RequirementDetail, per Apple
Watch modelApple Watch Series 3 or later with watchOS 7.4 or later
PairingThe watch must be paired with the iPhone
ConnectivityWi-Fi and Bluetooth on for both, and the iPhone does not need to be on a Wi-Fi network
Watch statePasscode set, wrist detection on, worn and unlocked
DistanceWithin about 2 to 3 meters, and the watch not in bedtime mode

Apple’s security guide also says the iPhone must have been unlocked another way after you put the watch on, and within the past 6.5 hours.

In practice, that means a long stretch without any passcode or Face ID unlock can stop the watch from unlocking the phone.

What it will not unlock

Apple says the watch unlocks the iPhone itself, but it does not approve Apple Pay, Keychain passwords or password-protected apps.

For those you still need your passcode, and Apple Pay can be approved on the watch itself.

If the watch unlocks the iPhone by mistake, tap Lock iPhone on the watch alert, and the next unlock then needs your passcode.

On iPhone 12 or later with iOS 15.4 or later, Apple also lets Face ID work with a mask without the watch.

Symptom and likely reason

What you seeLikely reason, per Apple
Mac asks for a password after a restartThe first login after a restart, log out or turning the feature on always needs your password
Mac or iPhone ignores the watchThe watch is locked, off your wrist, too far away or in bedtime mode
Double-click on the watch does nothingAuto Unlock is off in System Settings, or the watch is locked
iPhone asks for a passcode while you wear a maskThe iPhone was not unlocked another way within the past 6.5 hours, or Unlock with Nearby Devices is off
iPhone wants a passcode after you tapped Lock iPhoneThat alert locks the phone and requires the passcode next time

Apple says the Apple Watch must be paired with the iPhone for any of this to work, so check the pairing first.

If the watch will not connect to the phone at all, start with Apple Watch won’t pair.

An old watch software build can also get in the way, and our update guide covers a stuck update.

Sources: Unlock your Mac with your Apple Watch, Unlock your iPhone with Apple Watch when you’re wearing a face mask or sunglasses and Automatically unlock Apple devices.

Leave a Reply

Your email address will not be published. Required fields are marked *