How To Fix Apple Watch Heart Rate Not Working (2026)
When an Apple Watch shows no heart rate, or readings that look wrong, the cause is often fit, a setting or the conditions rather than a broken sensor.
Apple publishes guidance on how the sensor works, which settings control it, and what interferes with readings.
This guide turns those pages into a checklist you can follow in order.
Quick answer: the most common causes
| Symptom | Likely cause | Fix, per Apple |
|---|---|---|
| No background readings or Stand alerts | Wrist Detection is off | Watch app, My Watch, Passcode, turn on Wrist Detection |
| No heart rate at all | Heart Rate is off in privacy settings | Watch app, Privacy, turn on Heart Rate |
| Erratic readings during exercise | Loose band | Wear it snug on top of the wrist for workouts |
| No reading in cold weather | Reduced blood flow at the wrist | Warm up and try again |
| No heart rate alerts | Low Power Mode is on | Turn off Low Power Mode |
| Inconsistent readings with tattoos | Ink blocks the sensor light | Use a Bluetooth chest strap |
How the heart rate sensor works
Apple says the optical sensor uses green LEDs and light-sensitive photodiodes to detect blood flow through the wrist.
The measurable range is 30 to 210 beats per minute, and weak signals make the sensor raise LED brightness and sampling rate.
Series 4 and later, and all Ultra models, also have an electrical sensor in the Digital Crown and back, which is used for ECG.
To take a faster reading, open the Heart Rate app and rest a finger on the Digital Crown, which Apple says gives a reading every second.
| Sensor | Available on | Used for, per Apple |
|---|---|---|
| Optical (green LEDs, photodiodes) | All models | Background and workout heart rate, range 30 to 210 BPM |
| Electrical (Digital Crown and back) | Series 4 and later, all Ultra models | Faster finger readings and the ECG app |
| ECG app | Not supported on Apple Watch SE | Availability depends on country or region |
Turn on Wrist Detection
With Wrist Detection off, Apple says you will not get Stand notifications and background readings such as resting and walking heart rate are not taken.
- Open the Watch app on the iPhone.
- Tap the My Watch tab, then tap Passcode.
- Make sure Wrist Detection is on.
Check that Heart Rate is allowed
If Heart Rate is switched off in the Watch app under Privacy, no measurements are taken at all.
Open the Watch app, tap Privacy, and confirm Heart Rate is on.
Fix the fit
Apple says the watch should feel snug but comfortable, sitting above the wrist bone toward the elbow.
Tighten the band for workouts and loosen it afterward.
A quick test from Apple is to shake your wrist and turn your palm up, and if the back of the watch loses contact with your skin, tighten the band.
The sensors only work when the back of the watch touches skin on the top of the wrist.
Conditions that affect readings
| Factor | Effect, per Apple |
|---|---|
| Skin perfusion | Blood flow varies by person and environment, and cold weather can reduce it enough to prevent a reading |
| Tattoos | Ink, pattern or saturation that blocks sensor light can make readings unreliable |
| Skin changes | Permanent or temporary changes can also have an effect |
| Motion | Rhythmic activity like running or cycling reads better than tennis or boxing |
Apple also says the watch may not get a reliable reading every time for everyone, and a small percentage of people may get no reading.
If you cannot get consistent readings, Apple suggests pairing a Bluetooth heart rate monitor such as a chest strap.
Pick the right workout type
In the Workout app, choose the option that best matches your activity, such as Indoor Run for a treadmill.
If your activity is not listed, tap Add Workout and pick the closest match.
Apple also recommends calibrating the watch to improve distance, pace and calorie accuracy.
Keep your height, weight, sex and age current under My Watch, Health, Health Details, since calorie estimates use them.
Activity credit that looks wrong
Apple says each full minute at or above a brisk-walk intensity counts toward Exercise and Move, and slower movement counts only toward Move.
The Activity app leans on arm motion and the accelerometer, so let the watch arm swing naturally on walks.
If you need both hands, such as when pushing a stroller, start Outdoor Walk in the Workout app, which can also use the heart rate sensor and GPS.
If heart rate alerts are not arriving
Apple says high and low heart rate notifications work on Series 1 or later for users 13 and older, and you choose the BPM limits yourself.
- Open the Apple Watch app and tap My Watch, then Heart.
- Tap High Heart Rate and choose a BPM.
- Tap Low Heart Rate and choose a BPM.
Irregular rhythm notifications require your region to support them, the latest iOS and watchOS, and an age of 22 or older.
Apple states that Low Power Mode stops both high and low heart rate and irregular rhythm notifications.
If notifications of any kind are missing, see Apple Watch not getting notifications.
Newer models and continuous measurements
On Series 12 and Ultra 4, Apple says green LEDs can measure as often as every 5 seconds during the day.
Infrared LEDs are used when a Sleep schedule or Sleep Focus is on.
You can turn off continuous green LED measurements under Settings, Heart on the watch, and battery use is covered in our battery guide.
Update and restart
Apple does not list a software fix on its heart rate pages, but an out-of-date watch is a reasonable thing to rule out.
Our guide to a stuck Apple Watch update covers the steps.
When to see a doctor or contact Apple
Apple says some readings can occasionally be abnormally high or low, and the watch cannot detect heart attacks.
For chest pain, pressure or a suspected heart attack, call emergency services instead of relying on the watch.
Sources: Get the most accurate measurements using your Apple Watch, Monitor your heart rate with Apple Watch, Heart health notifications and Wearing your Apple Watch.