How To Fix Apple Watch Not Updating Or Stuck On Update (2026)

If your Apple Watch will not update, hangs on the progress wheel, or shows an error, the cause is usually a missing requirement rather than a broken watch.

Apple lists a short set of conditions that must be true before and during a watchOS update, and most failed updates miss one of them.

The steps below follow Apple’s own order, from the checks to unpairing as a last resort.

Quick answer: what must be true before you update

Apple’s update page lists these requirements.

RequirementWhat Apple says
Watch chargeAt least 50%
Watch powerKeep it on its charger during the update
iPhone softwareUpdated to the latest iOS
iPhone connectionOn Wi-Fi
VPNTurned off on the iPhone
DistanceiPhone kept near the watch throughout
TimeSeveral minutes to an hour

If any row is not true, fix it first and try again.

Which Apple Watch models can update?

Apple’s page for the current release lists the supported hardware.

DeviceSupported
Apple WatchSE 3, Series 9 and later, Ultra 2 and later
Paired iPhoneiPhone 11 or later, or iPhone SE (2nd generation) or later, on iOS 27

Apple says Software Update shows the newest version your particular watch supports.

It also notes that not every watchOS 27 feature works on every device.

Update the iPhone first

An outdated iPhone is a common blocker, so install the latest iOS before touching the watch.

Apple adds that if your iPhone shows an Update Apple Watch alert after an iOS update, you should update watchOS so Activity and other data keep syncing.

Sync problems after updates are covered in our Apple Watch not syncing with iPhone guide.

Which update method should I pick?

Apple describes three routes, and each suits a different situation.

MethodWhere you startWhat you need
Update TonightNotification on the watchConfirm on the iPhone and leave both devices charging overnight
Manual from iPhoneApple Watch app, My Watch, General, Software UpdatePasscode if asked, then wait for the progress wheel on the watch
Directly on the watchSettings, General, Software UpdateWatch connected to Wi-Fi, then tap Install

If one route keeps failing, try another before you move on to unpairing.

How do I update from the iPhone?

  1. Open the Apple Watch app and tap the My Watch tab.
  2. Tap General, then Software Update.
  3. Download the update.
  4. Enter your iPhone or watch passcode if asked.
  5. Wait for the progress wheel to appear on the watch.

How do I update directly on the watch?

  1. Connect the watch to Wi-Fi.
  2. Open Settings, then tap General, then Software Update.
  3. Tap Install and follow the onscreen steps.

Can I update overnight?

Apple says overnight is often easiest because the update can take up to an hour.

When the watch notifies you, tap Update Tonight and confirm on your iPhone.

Leave both devices charging overnight.

What should I avoid during an update?

  • Do not take the watch off its charger.
  • Do not restart the iPhone or the watch.
  • Do not quit the Apple Watch app.

Apple lists all three as things to avoid, and says the watch restarts by itself when the update finishes.

Because the watch needs power and a charge, review Apple Watch not charging if it will not stay on the charger.

What if the update will not start or fails?

Apple’s update troubleshooting runs in this order.

  1. Make sure the watch is charging properly.
  2. Restart the Apple Watch.
  3. Restart the paired iPhone.
  4. Make sure the iPhone is not using a VPN.
  5. Try the update again.

If the update will not start at all, open the Apple Watch app, tap General, then Storage, and delete the update file before retrying.

How do I fix Unable to Verify Update?

Apple attributes this error to the watch not being connected to the internet.

StepWhat to do
1Confirm the watch is online through the iPhone, or directly through Wi-Fi or mobile data, then retry
2Restart the watch, confirm the connection, and retry
3Remove synced music and photos, then remove some apps if it still fails
4Unpair the watch and update it
5Optional: restore from backup after unpairing

Work down the table and stop as soon as the update succeeds.

What if the watch says storage is full?

Apple has a separate page for a full watch, and it starts with checking how much space is left.

On the watch, open Settings, tap General, then tap Storage.

OrderApple’s stepWhat to do
1Restart and retryRestart the watch, then try the watchOS update again
2Free up spaceRemove music, turn off photo syncing, and remove some apps
3RetryTry the update again after clearing space
4Unpair and set up as newOnly if it still fails, then install the update
5Add content backPut back the music, photos and apps you removed

Apple says to add the music, photos and apps back after the update succeeds.

If you unpair, the same page offers restoring from a backup instead of setting up as new.

Keep the watch and iPhone close together for the whole process.

Do I need to remove a beta profile?

Apple says to remove any beta profile before updating to the next major version.

  1. On the iPhone, open the Apple Watch app, then My Watch, General, Profiles.
  2. Select the beta profile and tap Delete Profile, entering your passcode if asked.
  3. Restart both devices and check for the update again.

The alternative path is iPhone Settings, General, Profiles & Device Management.

How do I unpair and update as a last resort?

  1. Keep the watch and iPhone close together.
  2. Open the Apple Watch app, tap My Watch, then All Watches.
  3. Tap the info button next to the watch and tap Unpair Apple Watch.
  4. On GPS + Cellular models, choose to keep the mobile data plan.
  5. Confirm, entering your Apple Account password if asked to disable Activation Lock.
  6. Set up the watch again as new, then update it.

Apple says the iPhone backs up the watch before erasing it.

If you would rather keep your data, you can restore from that backup instead of setting up as new.

For battery questions afterward, see Apple Watch battery draining, and for missed alerts see Apple Watch not getting notifications.

Sources: Apple: If your Apple Watch storage is full, Apple: Update your Apple Watch and Apple: If you see Unable to Verify Update.

Leave a Reply

Your email address will not be published. Required fields are marked *