How To Reset An Apple Watch When You Forgot The Passcode (2026)
If you cannot remember your Apple Watch passcode, there is no way to look it up or skip it.
Apple’s official fix is to erase the watch, set it up again, and restore it from a backup.
This guide shows both of Apple’s reset methods, what happens to your cellular plan and Activation Lock, and how to stop the watch from locking you out again.
Quick answer
| Method | Where | Best when |
|---|---|---|
| Reset on the watch | Charger, side button, Digital Crown, Reset | Your iPhone is not nearby or will not connect |
| Reset using your iPhone | Apple Watch app, My Watch, General, Reset, Erase Apple Watch Content and Settings | Your paired iPhone is with you |
| Reset without the passcode if pairing stalls | Hold the Digital Crown while the watch shows the pairing animation, then tap Reset | Setup is stuck on the pairing screen |
What to know before you reset
Resetting erases everything on the watch, so you will set it up again afterwards.
Apple says the watch can restore from a backup when you set it up again, and your iPhone keeps backups of the watch.
Apple also notes that if Erase Data is turned on, the data on the watch is erased after 10 failed passcode attempts.
That means repeated wrong guesses can end in the same reset anyway.
Reset the Apple Watch from the watch
- Place the watch on its charger and keep it there until you finish.
- Press and hold the side button until the power button appears in the upper-right corner.
- Press and hold the Digital Crown until you see Erase all content and settings.
- Tap Reset, then tap Reset again to confirm.
- Wait for the process to finish.
Apple notes that earlier watchOS versions show a Power Off slider instead of the power button.
If the red Reset button has not appeared, keep holding the Digital Crown.
Reset the Apple Watch from your iPhone
- Keep the watch and the iPhone close together.
- Open the Apple Watch app on the iPhone and tap the My Watch tab.
- Tap General, scroll down and tap Reset.
- Tap Erase Apple Watch Content and Settings, then tap it again at the bottom to confirm.
- Enter your Apple Account password if asked.
Apple says erasing through the iPhone turns on Activation Lock for the watch.
Cellular models: keep or remove the plan
On a GPS + Cellular model, the iPhone asks whether to keep your cellular plan.
| Your plan | What Apple says to choose |
|---|---|
| You will pair the watch with the same iPhone again | Keep the plan |
| You will pair with a different iPhone | Remove the plan |
| You want to cancel the subscription | Remove it, then contact your carrier, because the carrier cancels the subscription |
Set up the watch again and restore a backup
- After the reset finishes, bring the iPhone near the watch.
- Follow the onscreen setup steps.
- When asked, restore from a backup, and choose the most recent one.
- If you have no backup, set the watch up as new.
Apple says to update the iPhone and the watch first, or the backup may not appear in the list.
Our guide to moving an Apple Watch to a new iPhone explains how the restore works.
Activation Lock after a reset
Resetting on the watch itself does not remove Activation Lock.
Apple says you will need the Apple Account and password used to set the watch up to turn it off.
If setup asks for a passcode, Apple says the watch is still paired to another iPhone and must be erased and set up again.
If an Activation Lock screen appears, you need that account’s email and password, and a previous owner may need to remove the lock.
Apple’s official route needs your own Apple Account, so use the account that was on the watch.
If the watch gets stuck while pairing
Apple says that if the pairing animation stays on screen for several minutes, you can press and hold the Digital Crown while the watch is in pairing mode.
Tap Reset when it appears.
For other errors, see our fix for an Apple Watch that will not pair.
Stop the watch locking you out again
Two settings make the passcode less of a problem day to day.
| Setting | Where | What it does |
|---|---|---|
| Unlock with iPhone | Apple Watch app on iPhone, My Watch, Passcode, Unlock with iPhone | Unlocks the watch when your iPhone is within about 33 feet (10 meters) |
| Wrist Detection | Watch Settings, Passcode, Wrist Detection | On by default; locks the watch when you take it off and unlocks it when you put it on |
If Bluetooth is off on the watch, Apple says you must enter the passcode on the watch.
If the watch asks for the passcode while you are wearing it, see our fix for an Apple Watch that will not unlock your iPhone or Mac.
If the watch locks while on your wrist
Apple says wrist detection can fail when the sensor on the back of the watch does not touch your skin.
- Adjust the band so the watch sits flat on top of your wrist, snug but comfortable.
- Remove anything between the watch and your wrist.
- If a scar or tattoo is in the way, wear the watch on the other wrist and set Settings, General, Orientation to Left or Right.
Turning Wrist Detection off stops heart rate tracking, notifications and automatic locking, so Apple treats it as a last resort.
What turning off Wrist Detection changes
Apple lists these effects, so weigh them before you switch it off.
| Feature | With Wrist Detection off |
|---|---|
| Locking | The watch does not lock or unlock automatically |
| Fall Detection | It will not automatically start Emergency SOS |
| Health tracking | Heart rate tracking stops, and so do background Blood Oxygen and respiratory rate measurements |
| Sleep and Activity | Sleep tracking is unavailable and some Activity measurements are unavailable |
| Apple Pay | The passcode is required when you double-click the side button |
Sources
- Apple Support: If you forgot your Apple Watch passcode
- Apple Support: If you can’t pair an Apple Watch with your iPhone
- Apple Support: If your Apple Watch locks unexpectedly
- Apple Support: Wake and unlock Apple Watch