|

How To Turn Off Memory Integrity In Windows 11 (2026)

If Windows Security now shows Memory integrity as On and you never turned it on, a recent update most likely did it.

You can switch it back off in a few clicks from the Core isolation page, then restart the PC.

This guide gives the exact path, says what has been reported about the update versus what Microsoft itself documents, and covers the cases where the switch will not turn off or on.

Quick answer

StepWhat to do
1Open Start, then Settings > Privacy & security > Windows Security > Device security
2Select Core isolation details
3Set Memory integrity to Off
4Restart the computer so the change takes effect

What was reported about the update

Several outlets reported in November 2026 that Windows 11 updates are turning Memory integrity on for eligible PCs.

According to Help Desk Geek, Microsoft’s notes for KB5127936, an October 28 preview update for Windows 11 25H2 and 26H2, say supported PCs may now have memory integrity enabled during updates.

The same report says KB5132061, the November 10 Patch Tuesday update, carries those changes to more PCs.

The rollout is described as gradual, so installing the update does not mean every PC changes at once.

TechRadar reported earlier, in September, that Microsoft said more devices would soon receive stronger protection by default with no additional setup.

Reported versus confirmed

ClaimStatus
Core isolation details is where Memory integrity is switched On or OffConfirmed on Microsoft’s support page
A restart is needed after turning it offConfirmed on Microsoft’s driver support page
KB5127936 and KB5132061 can turn it onReported by Help Desk Geek, citing Microsoft’s release notes and WindowsLatest
PCs where you already turned it off are left aloneReported by Help Desk Geek and TechRadar, not stated on the pages we read from Microsoft
It lowers game frame ratesAnecdotal user reports only, with no measured data in the reports we read

Microsoft’s Device security page does not say Memory integrity is on by default, so treat the update link as reported rather than confirmed.

Turn off Memory integrity

  1. Open Windows Security from the Start menu, or go to Start > Settings > Privacy & security > Windows Security.
  2. Select Device security.
  3. Select Core isolation details.
  4. Set the Memory integrity toggle to Off.
  5. Restart the computer.

Microsoft’s Device security page says the control is a toggle with On and Off positions.

It also notes that the features shown on the Core isolation page vary with your Windows version and hardware.

What Memory integrity does

Memory integrity is also called Hypervisor-protected Code Integrity, or HVCI.

Microsoft describes it as a feature that makes it difficult for malicious programs to use low-level drivers to hijack your PC.

It works by creating an isolated environment using hardware virtualization, where code that might be dangerous is checked before Windows runs it.

That is why Microsoft says hardware virtualization must be enabled in your system’s UEFI or BIOS for it to work.

Should you turn it off

Turning it off removes a security layer, and Help Desk Geek notes that Defender’s real-time protection does not replace it.

Help Desk Geek recommends leaving it on unless you can tie a specific problem to it.

If the reason is game performance, note that the reports we read describe gamers’ frame rate drops of up to about 10 percent on some PCs, while other users noticed no impact.

Those figures are anecdotal and mostly come from older hardware reports, so test your own games before and after.

On a work or school PC, check with your IT department first, because TechRadar reports that group policy can keep the setting disabled on managed PCs.

What else changes when it is off

FeatureLink to Memory integrity, per Microsoft
Kernel-mode Hardware-enforced Stack ProtectionRequires Memory integrity to be on, plus a CPU with Intel CET or AMD Shadow Stack
Vulnerable driver blocklistIs on when Memory integrity, Smart App Control or Windows S mode is on
Enhanced hardware security ratingNeeds Memory integrity to be on
Secured-core PC statusTurning Memory integrity off takes a Secured-core PC out of that state

If it will not turn back on

Microsoft says Memory integrity may tell you an incompatible device driver is already installed.

Check with the device maker for an updated driver, and if there is none, you may be able to remove the device or app that uses the driver.

Our guide to updating a driver in Windows 11 shows how to look for a newer one.

Microsoft adds that the same message can appear if you install an incompatible device after switching Memory integrity on.

If a driver can’t load message appears

Microsoft’s page for this message says the Memory integrity setting is preventing a driver from loading.

It lists two options, first to look for an updated, compatible driver through Windows Update or the driver maker.

The second option is to turn Memory integrity off, which can also stop the functionality that driver supports.

Microsoft says the driver probably is not malicious, but has a minor vulnerability that blocks it from loading.

If no updated driver exists, Microsoft suggests asking the manufacturer whether a fix is planned.

If the toggle is missing or greyed out

Microsoft says the page’s features depend on your version of Windows and installed hardware, so some PCs show fewer options.

Memory integrity also needs hardware virtualization enabled in UEFI or BIOS, so check that setting if you want it on.

Our guide to checking which Windows version you have helps when a support page depends on your build.

If the update caused other problems

A Memory integrity change on its own does not mean you need to remove the whole update.

If you do want to roll an update back, our steps for uninstalling a Windows update in Windows 11 cover the Settings and recovery routes.

Creating a restore point in Windows 11 first gives you a way back.

To see whether newer fixes are waiting, use check for updates in Windows 11.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *