|

How To Run SFC And DISM In Windows 11 (2026)

SFC and DISM are two Windows tools that scan for and repair missing or corrupted system files.

Microsoft’s guidance is to run DISM first and System File Checker second, both from an elevated Command Prompt.

This guide gives the exact commands, what each result message means, and where to find the log.

Quick answer

StepWhat to do
1Open Command Prompt as administrator
2Run DISM.exe /Online /Cleanup-image /Restorehealth
3When it says the operation completed successfully, run sfc /scannow
4Wait for Verification 100% complete, then type exit

When to use SFC and DISM

Microsoft lists Windows features not working, system errors and freezing as reasons to run these tools.

SFC scans protected system files and replaces corrupted ones with a cached copy.

DISM supplies the files SFC needs for those repairs, which is why DISM goes first.

Both tools can take several minutes, so start them when you do not need the PC.

Before you start

Microsoft’s page on using System File Checker says to install the latest Windows updates and restart the PC first.

If you are not sure the PC is current, see how to check for updates in Windows 11.

Run Command Prompt as administrator, because the commands may not work without it.

Open Command Prompt as administrator

  1. Type cmd or command prompt in the taskbar search box.
  2. Right-click Command Prompt in the results and select Run as administrator.
  3. If prompted, select Yes or Allow, or enter the administrator password.

Run DISM first

In the elevated window, type the command below and press Enter.

DISM.exe /Online /Cleanup-image /Restorehealth

Keep a space before each slash exactly as shown.

It can take a few minutes to start and finish.

Wait for the message “The operation completed successfully” before moving on.

Run System File Checker

In the same Command Prompt window, type the command below and press Enter.

sfc /scannow

Keep a space between sfc and the slash.

Do not close the window until the verification is 100 percent complete.

When you see “Verification 100% complete”, type exit and press Enter.

The two commands compared

CommandWhat it doesRun it
DISM.exe /Online /Cleanup-image /RestorehealthSupplies the files SFC needs to make repairsFirst
sfc /scannowScans protected system files and replaces corrupted ones with a cached copySecond, in the same window

What the SFC messages mean

MessageMeaning and next step
Windows Resource Protection did not find any integrity violationsNo missing or corrupted system files were found
Windows Resource Protection could not perform the requested operationRun the scan in safe mode, and confirm the PendingDeletes and PendingRenames folders exist under %WinDir%\WinSxS\Temp
Windows Resource Protection found corrupt files and successfully repaired themThe repair worked, and the log has the details if you want them
Windows Resource Protection found corrupt files but was unable to fix some of themFind the file in the log and replace it manually

For the safe mode message, our guide to starting Windows 11 in safe mode shows how to get there.

Rules that keep the scan from failing

  • Run both commands in an elevated Command Prompt, because the commands may not work otherwise.
  • Keep the spacing exactly as written, including the space before each slash.
  • Run DISM before SFC, never the other way around.
  • Leave the window open until SFC reports that verification is 100 percent complete.
  • Install the latest Windows updates and restart the PC before you begin.

Microsoft’s article lists Windows 11 along with Windows 10, 8, 8.1 and 7, so the same commands apply across versions.

How to tell each step is done

ToolMessage that means it finished
DISMThe operation completed successfully
SFCVerification 100% complete

Microsoft’s shorter page does not explain other DISM or SFC output, so use the result table above for the SFC messages.

Read the SFC log

SFC writes its activity to %windir%\Logs\CBS\CBS.log.

To copy the SFC entries to a readable file on your desktop, run this in the elevated Command Prompt.

findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"

The file contains entries from every SFC run, so check the date and time stamps to find the latest one.

An entry for a file that could not be repaired reads like “Cannot repair member file” followed by the file name and details.

Replace a file SFC could not repair

Use this only for files the log shows could not be repaired, and replace the placeholder with the file’s full path.

  1. Take ownership with takeown /f <Path_And_File_Name>.
  2. Give administrators full access with icacls <Path_And_File_Name> /grant administrators:F.
  3. Copy a known good version over it with copy <Source_File> <Destination>.

Microsoft says a good copy can come from another computer running the same Windows version, after you run SFC there to confirm the file is healthy.

If Windows Update is broken

Microsoft gives an alternate DISM command that uses a repair source instead of Windows Update.

DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess

Replace the path with your source, such as a running Windows installation or a Windows side-by-side folder on a network share or removable media.

If the scans do not fix it

Microsoft says that if these steps fail, you may need to reinstall Windows.

Before that, you can reset Windows 11 and keep your files or go back to an earlier state with a restore point.

Microsoft’s article on recovery options points you to these tools when repair commands fail.

The reset and cloud rebuild options are under Settings > System > Recovery.

The same page lists point-in-time restore at System > Recovery > Point-in-time restore, and a way into the Windows Recovery Environment through Advanced startup and Restart now.

Try the least drastic option first, since a restore point or a reset can change more than a repair scan does.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *