|

How To Reset Network Settings In Windows 11 (2026)

Network reset in Windows 11 removes your network adapters and puts their settings back to default.

Microsoft recommends it as the last step to try, after the simpler fixes have failed.

This guide shows where it is, what it changes, what to set up again, and the fixes to try before you use it.

Quick answer

StepWhat to do
1Open Settings > Network & internet > Advanced network settings > Network reset
2Select Reset now
3Select Yes to confirm
4Wait for the PC to restart, then check whether the problem is fixed

What network reset does

Microsoft says network reset removes your installed network adapters and their settings.

After the restart, Windows reinstalls the adapters with default settings.

Microsoft says it can help with problems after upgrading from Windows 10 to Windows 11.

It can also help when you cannot reach shared network drives.

Try these fixes first

Because Microsoft calls network reset the last step, work through the simpler fixes before it.

  1. Save your work, then select Start > Power > Restart.
  2. Go to Settings > Network & internet > Airplane mode and make sure it is off.
  3. Restart your modem and router.
  4. Run the Network and Internet troubleshooter in the Get Help app.
  5. Check for Windows updates.

Our guide to checking for updates in Windows 11 covers the last one.

In Microsoft’s own Wi-Fi checklist, network reset is the thirteenth and final step, after the driver, ping and Windows Update steps and a PC restart.

Restart the modem and router correctly

  1. Unplug the router, then unplug the modem.
  2. If the modem’s lights stay on, remove its backup battery.
  3. Wait at least 30 seconds.
  4. Plug the modem back in and let its lights stop blinking.
  5. Plug the router back in and wait a few minutes.

Network commands to try before a reset

Microsoft’s Wi-Fi and Ethernet pages both list a set of commands that reset the TCP/IP stack and refresh your connection.

Open Command Prompt as administrator by searching for Command prompt on the taskbar, then selecting Run as administrator and Yes.

Run these in order, pressing Enter after each one.

CommandWhat it does
netsh winsock resetResets the TCP/IP stack
netsh int ip resetResets the TCP/IP stack
ipconfig /releaseReleases the IP address
ipconfig /renewRenews the IP address
ipconfig /flushdnsClears the DNS client resolver cache

Check whether the connection works after you run them.

Run a network reset

  1. Select Start and type settings, then open Settings.
  2. Go to Network & internet, then Advanced network settings.
  3. Select Network reset.
  4. Select Reset now, then select Yes to confirm.
  5. Wait while the PC restarts.

On Windows 10, the same screen is under Settings > Network & internet > Status > Network reset.

What to set up again after a reset

ItemWhat to expect
VPN client softwareYou may need to set it up again
Hyper-V virtual switches and other network virtualization softwareYou may need to set it up again
Network profilesKnown networks may switch to Public, which makes your PC undiscoverable to other devices
Wi-Fi networksMicrosoft’s page does not mention passwords, but you will likely need to reconnect, so have them ready

To switch a network back to Private, follow the steps in Microsoft’s Essential network settings and tasks article.

If you do not remember a Wi-Fi password, see how to find your Wi-Fi password in Windows 11.

Forget and reconnect to the Wi-Fi network

  1. Open Settings and select Network & internet > Wi-Fi.
  2. Select Manage known networks.
  3. Select your Wi-Fi network, then select Forget.
  4. Reconnect by selecting the network and entering the password.

This affects one network instead of every adapter, so it is a lighter option than a full reset.

Run a ping test to the router

  1. Type command prompt in the taskbar search box, then select Run as administrator and Yes.
  2. Type ipconfig and press Enter.
  3. Find your Wi-Fi network in the results and note the IP address next to Default gateway, such as 192.168.1.1.
  4. Type ping followed by that address and press Enter.
ResultWhat it means
Replies, with Lost = 0 (0% loss)Your PC can reach the router, so the problem may be your modem or internet provider
No repliesConnect the PC to the modem with an Ethernet cable if you can; if the internet works, the Wi-Fi router is the likely problem

For no replies, Microsoft says to install the latest router firmware and check the router’s documentation.

Try the other Wi-Fi band

Many routers broadcast both 2.4 GHz and 5 GHz networks, which appear as separate networks.

If both appear, try connecting to the other one.

If you cannot see your network, your adapter may not support its frequency.

In Device Manager, open the adapter’s Properties, select the Advanced tab, and look for a Wireless Mode or Band setting.

Reinstall the network adapter driver

For a wired connection, Microsoft describes reinstalling the Ethernet adapter driver in Device Manager.

  1. Open Device Manager and expand Network adapters.
  2. Select your Ethernet adapter and choose Uninstall device.
  3. Check the box to attempt removing the driver, then select Uninstall.
  4. Restart the PC so Windows tries to reinstall the driver.

Microsoft advises backing up the driver from your PC manufacturer’s website first.

Our guide to updating or reinstalling a driver in Device Manager has more detail.

Check the connection status

For Ethernet, Microsoft says the connection should show Connected under Settings > Network & internet.

If it shows Action needed, select Ethernet to view its settings.

If pages still do not load after a reset, you can change the DNS server in Windows 11.

For broader connection problems, see how to fix Windows 11 internet connection issues.

If the reset causes new trouble, a restore point can roll system settings back.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *