|

How To Install ScanSnap Home On Windows Or Mac (2026)

You install ScanSnap Home by downloading the installer from the official ScanSnap download page and running it on your computer.

The same steps work on Windows and on a Mac, and a second route called the offline installer covers computers that cannot get online.

This guide follows the vendor’s own pages, so the button names below match what you will see on screen.

Quick answer: install ScanSnap Home

SituationWhat to do
Computer is onlineGo to scansnap.com/d, click Download Installer, agree to the license, then run the file
Computer is offlineDownload the Offline Installer on another computer and copy it over
Installer failsStop your security software for the install, or do a clean boot
New computer, old scannerExport profiles and content data first, install, then import them

Which ScanSnap software to install

ScanSnap’s FAQ says to pick the software by where your scanned images should be saved.

  • To save to a computer, or to cloud storage through a computer, install ScanSnap Home on the computer.
  • To save to a phone or tablet, install ScanSnap Home for mobile on that device.

The install article lists the iX1300, iX1600, iX1500, iX1400, iX100, iX500, iX2500, iX2400, SV600, S1100i and S1300i.

If you used the older ScanSnap Manager, note that its downloads have been discontinued and ScanSnap Home is the app to install.

Check the system requirements first

ScanSnap’s help site warns that the scanner may not operate if the computer does not meet the requirements.

ItemWindowsmacOS
Operating systemWindows 11 and Windows 10, 32-bit or 64-bitSequoia 15, Sonoma 14, Ventura 13, Monterey 12 and older listed versions
ProcessorIntel or Intel-compatibleIntel or Apple silicon
Display1024 x 768 pixels or higher1024 x 768 pixels or higher
Free disk space for ScanSnap Home3.8 GB, plus up to 4.5 GB if .NET Framework 4.8 or later must be installed2.5 GB
USBUSB 3.2 Gen 1, 3.1, 3.0, 2.0 or 1.1USB 3.2 Gen 1, 3.1, 3.0, 2.0 or 1.1

Those figures come from the System Requirements page, which applies to ScanSnap Home 2.xx and points to a separate help site for version 3.0 or later.

The separate supported-systems list is newer and adds macOS Tahoe 26 to the Mac side, so check it if you run the latest macOS.

Preview or beta versions of an operating system are not supported.

Install with the online installer

The computer must be connected to the internet for this route.

  1. Open the ScanSnap software download page at scansnap.com/d.
  2. Click Download Installer.
  3. Read the end-user license agreement and click Agree, and the download starts on its own.
  4. Open the downloaded file, which is named WinSSHDownloadInstaller on Windows or MacSSHDownloadInstaller on a Mac, followed by a version number.
  5. In the Welcome to ScanSnap Home Setup window, click Next.
  6. Under Setup Type, select Typical and click Next.
  7. On the review screen, click Install.
  8. Wait for the installation to finish.

The FAQ says the installation may take 10 to 15 minutes, so do not close the window early.

The screenshots on that page are from Windows, and the page states the macOS windows are similar and the procedure is the same.

Connect the scanner after installation

When the install finishes, a window for choosing your model opens and the connection setup starts automatically.

  1. In ScanSnap Home – Connecting ScanSnap, select your model and click Start setup.
  2. Choose Connect by USB or Connect by Wi-Fi and click Next.
  3. Follow the on-screen instructions.
  4. When the Let’s use it window appears, review it and click Close.

The FAQ says the message Connection is complete appears when setup is done.

Use only the cable supplied with the scanner for a USB connection, because ScanSnap’s help warns that other cables may cause a scanner failure.

Install with the offline installer

The offline installer is a full package you download once and run without needing the download step on the target computer.

  1. On a computer with internet access, open scansnap.com/d and select your scanner model and your operating system.
  2. Display the software list and, in the ScanSnap Home section, choose the offline installer option.
  3. Download the ScanSnap Home Offline Installer: the .exe file for Windows, or the MacSSHOfflineInstaller.dmg file for macOS.
  4. Copy the file to a USB flash drive or similar storage device.
  5. Connect the drive to the offline computer and copy the file to an easy-to-find place such as the Desktop.
  6. Run the file and follow the on-screen instructions.

Discontinued scanner models appear further down the model list, so scroll if yours is not near the top.

If security software blocks the install

ScanSnap’s support article says to stop your security software temporarily before running the offline installer.

Restart the security software immediately after ScanSnap Home is installed.

While it is stopped, do only the installation and nothing else, and the article specifically names registering a ScanSnap account as something to wait on.

If the security software cannot be fully stopped, the installation may fail, and the article gives two alternatives.

  • Perform a clean boot, then install ScanSnap Home, using Microsoft’s official instructions.
  • Uninstall the security software, then install ScanSnap Home, using that software’s manual.

Move ScanSnap Home to a new computer

ScanSnap’s help covers changing the computer your scanner works with, and the order matters.

  1. On the current computer, export your profiles to a folder the new computer can reach.
  2. Export the content data records managed in ScanSnap Home to that folder as well.
  3. On the new computer, download and run the installer from scansnap.com/d, online or offline.
  4. Select your model, click Start setup, and connect by USB or Wi-Fi.
  5. Import the saved profiles, then import the content data records.

The detailed export and import steps are in the linked topics on ScanSnap’s help site.

Minimum ScanSnap Home versions by operating system

Newer operating systems need newer builds, so download the current installer rather than an old copy.

Operating systemMinimum ScanSnap Home version
Windows 112.2.10 or later
Windows 11 Enterprise LTSC 20242.22.2 or later
Windows 10 Enterprise LTSC 20212.3.1 or later
macOS Tahoe 263.1.1 or later
macOS Sequoia 152.23.0 or later
macOS Sonoma 142.20.0 or later
macOS Ventura 132.7.0 or later
macOS Monterey 122.3.0 or later

On a Mac with Apple silicon, ScanSnap’s macOS page says ScanSnap Home version 3.6 or later runs natively, so Rosetta 2 is not needed.

That page also lists Windows 8.1 and earlier as no longer supported.

If the scanner is still not found after installing

A finished install does not always mean the scanner connects, and a cable, port or driver problem needs a different fix.

Our guide on ScanSnap not recognized by your PC covers that case step by step.

For other makers, see how to install or update a Brother printer driver and how to install an Epson printer driver.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *