How To Update Samsung SSD Firmware With Magician (2026)
Samsung updates the firmware on its SSDs through its own Samsung Magician software.
The update itself takes a few clicks, but Samsung lists several conditions that can make it fail.
This guide shows the Magician method, the bootable ISO method for when Magician does not work, and Samsung’s warnings for both.
Quick answer: update a Samsung SSD
| Method | Use it when |
|---|---|
| Samsung Magician, Update button | Magician runs on your Windows PC and detects the SSD |
| Bootable firmware ISO | Magician is unavailable, does not support your OS, does not detect the SSD, or cannot update while Windows is running |
Samsung says Magician is for Samsung-brand drives only, so it does not update other makers’ SSDs.
Before you start
Samsung’s firmware FAQ and Magician guide list the same precautions.
- Back up your data and close every program except Magician.
- Keep the PC powered and awake, with no sleep, hibernate or power-off.
- Do not disconnect the SSD while the update runs.
- Connect the SSD internally, because Samsung says updates cannot be done over an external USB connection.
Samsung says the firmware update does not delete your data, but it still recommends a backup.
Update with Samsung Magician
- Download Magician from Samsung’s Consumer Storage support site and install it.
- Launch Magician and select Update in the lower-left corner.
- If new firmware exists, the text New Version and a number appears next to the Update button.
- Click Update and follow the on-screen instructions.
Samsung says an icon marked N next to Update also signals that something new is available.
What happens after the update
Samsung’s Magician 9 guide says the PC shuts down automatically once the update finishes.
Magician counts down 20 seconds before the shutdown, and Samsung’s firmware page says a reboot may be needed to finish.
Samsung adds that firmware cannot be reverted once it is upgraded.
Check your Magician version
Samsung says clicking Update at the bottom left of the Magician main screen shows the installed version and whether it is the latest.
| Item | Detail from Samsung |
|---|---|
| Current Windows version | Magician 9.0.1, a 195 MB download |
| Windows requirement | Windows 10 or higher for Magician 9 |
| Older Windows | Windows 8.1 and older: use Magician 7.3 |
| Other systems | macOS and Android supported, internal SSDs are not; Linux not supported |
Why the update may be blocked
Samsung names a few situations where Magician cannot finish the job.
| Situation | What Samsung says |
|---|---|
| RAPID mode on | SSDs with RAPID mode enabled cannot be updated |
| AMD controller | Updates may fail; retry with the default SATA AHCI controller using Microsoft drivers |
| Proxy network | Magician may not offer full functions such as firmware updates |
| Drive locked with a user password | Magician does not work on the drive |
| SSD on SCSI or RAID controller | Magician does not work with that setup |
If Magician does not list your SSD at all, see our guide to Samsung Magician not detecting an SSD.
Update with a bootable ISO
Samsung’s firmware page describes a second method that works outside Windows.
- On Samsung’s Tools page, open the Firmware section and download the ISO for your exact SSD model.
- Use an ISO-to-USB tool such as UNetbootin to make bootable USB media.
- Restart the computer and choose the USB device as the boot source.
- The Samsung SSD Firmware Update Utility starts, detects supported SSDs and guides you through the update.
Samsung warns that making the bootable media can erase everything on the USB drive.
It also says the ISO is not a driver and is not installed in the operating system.
Firmware ISOs Samsung lists
Samsung’s Tools page lists one ISO per model, and these were the NVMe entries when we checked.
| SSD | Firmware listed | Samsung note |
|---|---|---|
| 990 PRO | 8B2QJXD7 | Read stability, December 2025 |
| 990 EVO Plus | 2B2QKXG7 | Compatibility, December 2024 |
| 990 EVO | 1B2QKXJ7 | Link stability and VMD driver, May 2025 |
| 980 PRO | 5B2QGXA7 | None listed |
| 970 EVO Plus | 4B2QEXM7 | None listed |
Versions change over time, so always match the one on Samsung’s page to your model.
Samsung’s Tools page also describes the firmware ISOs as for DOS use from a bootable CD or DVD.
Do not interrupt the update
Samsung says interrupting the update may cause data loss or leave the SSD unusable.
Its Magician guide also says not to force-quit Magician during firmware updates, benchmarks, Secure Erase and similar operations.
Related checks
If you only want to see whether your SSD is healthy, follow our guide to checking SSD or hard drive health in Windows 11.
Older 970 and 960 drives may also use the Samsung NVMe driver.