|

How To Check SSD Or Hard Drive Health In Windows 11 (2026)

Windows 11 can show an SSD’s health in Settings, but only for one kind of drive.

Go to Settings > System > Storage > Advanced storage settings > Disks & volumes, select Properties for the disk, and look for the health details.

This guide explains which drives show them, what each number means and what to do when Windows warns you.

Quick answer: where to see drive health

QuestionAnswer from Microsoft
Where is it?Start > Settings > System > Storage > Advanced storage settings > Disks & volumes > Properties for the disk
Which drives?NVMe SSDs only, internal or external
What does it show?Estimated remaining life, available spare and temperature
What if I get a warning?Back up your data, check the disk details and contact Microsoft Support

These points come from Microsoft’s support page about critical warnings for a storage device.

Which drives show health in Windows 11

Microsoft says Windows monitors only NVMe SSDs, so the readout is not there for every drive.

Drive typeHealth in Disks & volumes
NVMe SSDYes, monitored by Windows
SATA SSDNo
Hard disk drive (HDD)No

Microsoft describes SSDs as flash memory drives that use either a SATA or an NVMe interface.

It adds that an SSD can be internal or external, but only NVMe drives are monitored.

Check drive health in Settings

  1. Select Start and open Settings.
  2. Go to System > Storage.
  3. Select Advanced storage settings, then Disks & volumes.
  4. Select Properties for the disk you want to check.

Microsoft gives this same path as the place to check the details of an affected disk.

If you see a critical alert notification, you can select it to open the same page.

Find out whether your drive is an SSD or a hard drive

Microsoft says Disks & volumes lists your internal and external disks with the disk type, capacity and current usage.

The disk type there tells you whether you have an SSD or an HDD, which tells you whether a health readout is possible.

The same page lets you create, format or resize volumes, so be careful which button you press.

What the three health numbers mean

SettingWhat Microsoft says it means
Estimated remaining lifeAn approximate percentage based on the manufacturer’s life prediction
Available spareA value from 0% to 100% for the spare capacity left
TemperatureThe overall device temperature, in degrees Celsius

Microsoft notes that the life figure shows no lower than 0%, although the true value can go below that.

It also says reaching that point does not automatically mean the drive has failed.

How the life figure is worked out

Microsoft’s NVMe developer reference calls the underlying value Percentage Used.

It is a vendor-specific estimate of how much of the drive’s rated life has been consumed, based on real usage and the maker’s own prediction.

A value of 100 means the estimated endurance has been used up, and the reference says the device may still work.

The reference adds that the value can pass 100 and is updated once per power-on hour.

What the drive itself can report

Microsoft’s NVMe reference lists five condition flags that a drive can raise in its health log.

FlagMeaning when set
Available space lowSpare space has fallen below the threshold
Temperature thresholdA temperature is above an over-temperature limit or below an under-temperature limit
Reliability degradedSignificant media errors or other internal errors
Read-onlyThe media has been placed in read-only mode
Volatile memory backup failedApplies only to drives that have such a backup

The reference says these flags show the current state, so they are not stored permanently.

It also says the temperature is a composite reading for the whole device, including the controller.

The Settings page covers the first, third and fourth ideas as its three named warnings.

Why available spare matters

The reference defines a separate spare threshold, and the drive raises an event when the available spare value drops below it.

That is why Microsoft’s warning for low spare capacity refers to the manufacturer’s safety threshold rather than a number of its own.

The three critical warnings

WarningWhat it means
Spare capacity is lowSpare storage has fallen below the manufacturer’s safety threshold
Reliability is degradedSignificant media-related errors or an internal NVM subsystem error
Drive is set to read-onlyYou can still read data but cannot write to the drive

Microsoft says a warning can come with slowness, freezing, longer startup or trouble updating to the latest Windows 11.

What to do when Windows shows a warning

  1. Back up your files first, because Microsoft strongly recommends it.
  2. Open Properties for the disk in Disks & volumes and read the details.
  3. Contact Microsoft Support if the warning stays or you are unsure what to do.

Microsoft’s page gives no repair steps, so do not expect a setting to clear the warning.

To copy your files safely, use Windows Backup in Windows 11.

If your drive does not show health

A SATA SSD or hard drive has no health entry in Settings, so Windows gives you less to go on.

Microsoft’s Get-PhysicalDisk command lists each physical disk with its OperationalStatus and HealthStatus.

Get-PhysicalDisk | Select-Object FriendlyName, OperationalStatus, HealthStatus, Size

Open Terminal from the Start button, paste the line and press Enter.

Microsoft’s page lists Healthy, Warning, Unhealthy and Unknown as the health values, without describing each one.

Treat anything other than Healthy as a reason to back up, and check the drive for file system problems with error checking in Windows 11.

Slow or full is not the same as unhealthy

A drive that is nearly full can feel slow even when its health is fine.

The Storage page breaks down what is using space, and Storage Sense can remove temporary files and Recycle Bin contents automatically.

Our guide to freeing up disk space covers those steps.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *