How To Fix Samsung Health Not Counting Steps Or Syncing (2026)
Samsung Health can show a step count that is too low, stuck, or different from your watch, and the reason is usually a setting rather than a broken sensor.
This guide uses Samsung support pages to walk through step totals, sync, permissions and updates in the order that fixes most cases.
Start with the quick answer table, then work down the sections until your numbers match.
Quick answer: match the symptom to the fix
| What you see | Likely cause | First fix |
|---|---|---|
| Watch and phone show different step totals | Each device records steps separately | Set Select step data to show to All steps |
| Steps are missing on the phone after a watch workout | Watch data has not synced | Turn on Sync with Samsung Cloud, then tap Sync now |
| Data stopped syncing after the Samsung Health 7.0 update | A consent or privacy permission is off | Switch on the toggles under Privacy in Settings |
| Watch data will not reach the phone | Power saving, Airplane mode or Bluetooth is off | Turn those restrictions off and reconnect in Galaxy Wearable |
| Records from a doctor or hospital are missing | Provider is disconnected or expired | Reconnect under Home, then Health records |
Why Samsung Health steps look wrong
Samsung says a phone or tablet records steps whether it is in a pocket, bag, backpack or your hand.
A Galaxy watch records steps on its own, so two devices can legitimately report two different numbers for the same day.
Watch counts are estimates, and some watches only count when your arm moves, so pushing a lawnmower may not register.
Samsung also notes that environmental or skin conditions can affect tracking.
Check where you are looking at your steps
Before changing settings, confirm you are reading the right screen.
- Open Samsung Health and stay on the Home tab.
- Tap the Steps tracker.
- Tap the dates at the top to see each day.
- Swipe the graph for past days, and use the graph icon in the top right to switch between Hours, Days, Weeks and Months.
You can also add a Steps widget by long-pressing an empty spot on the Home screen, opening Widgets, choosing Health and adding Steps.
Combine phone and watch steps
If your phone total and watch total disagree, the fix is a display setting.
- In Samsung Health on the phone, open Steps.
- Tap More options (the three dots).
- Choose Select step data to show.
- Select All steps to combine them.
A short delay on the watch screen is normal, but Samsung says a long delay can point to weak GPS or a poor network connection.
Turn on cloud sync and sync now
Samsung lists cloud sync as the first step when watch data does not appear on the phone.
- Open Samsung Health on the phone.
- Tap More options, then Settings.
- Tap Sync with Samsung Cloud and turn on the switch at the top.
- Tap Sync now.
If your watch was set up without a phone, Samsung says its latest activity stays on the watch and cannot be viewed on the phone.
Turn on the Samsung Health 7.0 privacy toggles
Samsung says data that will not sync or restore after the 7.0 update is likely caused by missing permissions.
Open Samsung Health, tap the three dots, tap Settings, then scroll to Privacy and switch on the categories you want.
| Privacy toggle listed by Samsung | Relates to |
|---|---|
| Consent to the processing of health and wellness data | General health and wellness data |
| Consent to the processing of cycle tracking data | Cycle tracking |
| Consent to the processing of health records | Health records |
| Consent to the processing of medication data | Medication data |
| Location information | Location use in the app |
| Consent to the use of health data for AI training and modeling | Optional AI use of your data |
Samsung does not say which toggles are required for syncing, so enable only the categories you actually use.
Turn off watch modes that block syncing
| Restriction | How to turn it off |
|---|---|
| Power saving | Swipe down on the watch, tap the battery icon and confirm Power saving is off |
| Airplane mode | Swipe down, swipe to the Airplane icon and tap it |
| Watch only mode | Go to Settings, Battery, Power mode and choose Standard |
| Wear OS models | Hold the Power button to turn the watch off, then hold it again to turn it on |
Samsung also warns that Airplane mode turns Bluetooth off, so you must switch Bluetooth back on yourself.
Confirm the Bluetooth connection
Open the Galaxy Wearable app on the phone and read the status at the top.
- If it shows Start, tap Start, select the watch and follow the prompts.
- If it shows Remotely connected to watch or Disconnected from watch, check Bluetooth on both devices.
- On the phone, go to Settings, Connections, Bluetooth and confirm it is on.
- On the watch, open Settings, Connections, Bluetooth and confirm it is on.
A Galaxy Fit has no Bluetooth menu, so Samsung says to make sure the band is charged and powered on.
Update Samsung Health and your watch
In the Galaxy Wearable app, check for software updates for the watch and its apps.
On the phone, open Samsung Health, tap More options, Settings, then About Samsung Health, and Samsung says the version should be 6.2.0.075 or later for the watch sync fix it describes.
- Open the Play Store and tap your profile icon.
- Tap Manage apps & device, then the Manage tab.
- Tap Updates available.
- If Samsung Health is listed, select it and tap Update.
If it is not listed, Samsung says you may need to uninstall and reinstall the app.
Reinstall Samsung Health
Back up your data with the Galaxy Wearable app first, because Samsung is not responsible for lost data.
Open Settings, tap Apps, select Samsung Health, tap Uninstall, then install it again from the store.
You may be asked to sign in to your Samsung account when you reopen it, so have your sign-in details ready.
Unpair and reset the watch as a last step
- On the phone, go to Settings, Connections, Bluetooth.
- In Paired devices, tap the settings icon next to the watch and tap Unpair.
- On the watch, open Settings, General, Reset, then confirm Reset.
- Reconnect through the Galaxy Wearable app and check for updates again.
Samsung gives different reset paths for the Gear Fit2 Pro (Gear info, then Reset Gear) and the Galaxy Fit (About band, then Reset band).
Fix missing health records
Health records from a doctor or hospital follow a different process from step data.
| Status or message | What Samsung says to do |
|---|---|
| Records not showing | Close and reopen the app, then check Home, Health records |
| Disconnected | Usually a network issue, so reconnect to the provider |
| Expired | You were logged out, often after one week or one year of inactivity, so log in again |
| There is no data to add to Samsung Health | No records are available right now |
| Records just connected | They can take up to 24 hours to appear |
When to contact Samsung support
If data still will not sync after the reset, Samsung says to request service through its Support Center.
For the 7.0 permission problem, Samsung points owners to online chat or the Samsung Members app.
Related guides
- How to Fix Samsung Galaxy Cloud Sync Problems
- How To Fix Galaxy Watch Not Connecting To Phone (2026)
- How To Delete Personal Data From Samsung Health
- How To Fix Samsung Account Sign-In And Code Problems (2026)
Sources: Samsung: View your step count, Samsung: Health data not syncing between watch and phone and Samsung: Health data not syncing after 7.0 update.