How To Fix Samsung Smart Switch Not Working Or Stuck (2026)
Smart Switch problems usually show up as a transfer that fails, stalls partway, or never finds the other phone.
Samsung’s support pages trace most of these to low storage, a weak wireless link, or an out-of-date app.
Work through the fixes below in order, because the early ones are the quickest.
Quick answer by symptom
| Symptom | First fix |
|---|---|
| Wireless transfer fails | Free storage on both phones, deselect All, and pick content one item at a time |
| Transfer did not complete | Clear the Smart Switch cache, then retry |
| New phone cannot find the old one | Restart both, keep them within 4 inches, and turn on Bluetooth |
| Wireless keeps dropping | Switch to a USB cable |
| Old phone screen is broken | Connect it to a TV or monitor, using Samsung’s separate guide |
| Error about an unsupported version | Check the software version on both devices |
Restart both phones first
Samsung’s own steps begin with a restart of both phones.
On a phone with a Power button, press and hold it, tap Restart and confirm.
On a phone without one, swipe down with two fingers, tap the Power icon and restart from there.
Meet the wireless conditions
| Condition | What Samsung says |
|---|---|
| Distance | Keep both phones within 4 inches of each other |
| Old phone battery | Enough charge to start the transfer |
| New phone battery | Fully charged, or at least 50% |
| Network | Same Wi-Fi network, or enough mobile data on both |
| App | Smart Switch installed and updated on both phones |
| Bluetooth | On for both phones, and off on other nearby phones that have Smart Switch |
Run the wireless transfer again
- On the old phone, open Smart Switch, tap Send data, then tap Wireless.
- On the new phone, open Smart Switch, tap Receive data, choose Galaxy/Android or iPhone/iPad, then tap Wireless.
- Move any other nearby phones with Smart Switch out of the area.
- On the old phone, tap Connect to allow the connection.
- On the new phone, choose your content, tap Transfer and tap Done at the end.
Free up space on the new phone
Samsung says Smart Switch may be unable to complete a wireless transfer when the receiving phone’s storage is full or nearly full.
Delete what you do not need on both phones, and confirm the estimated total size does not exceed the space free on the new one.
Our guide to freeing space on a Samsung Galaxy lists safe ways to clear room.
Pick content one item at a time
On the selection screen, deselect All.
Then select the content you want individually and tap Transfer.
Clear the Smart Switch cache
- Open Settings and select Apps.
- Scroll to Smart Switch, tap it, then tap Storage.
- Tap Clear cache.
- If needed, tap Clear data, then Delete.
- Restart the transfer.
Samsung’s page says to contact Customer Support if the problem continues afterward.
Reinstall Smart Switch
If the transfer still fails with enough free space, uninstall and reinstall Smart Switch.
On Android, touch and hold the app on the Apps screen and tap Uninstall.
On an iPhone, touch and hold the app in the App Library, tap Delete App, then Delete.
Restart both devices afterward and install a fresh copy.
Fix the unsupported version error
If you see “The version of the connected device is not supported,” Samsung says to check the software version on your device.
Update the phone’s software and the Smart Switch app, then try again.
Switch to a USB cable
When wireless keeps failing, Samsung says to transfer with a USB cable and Smart Switch.
A wired link avoids the interference that can interrupt a wireless transfer, according to Samsung’s regional support page.
If the old phone’s screen is blank, broken or unresponsive, Samsung has a separate guide for connecting it to a TV or monitor.
If Smart Switch on a computer fails
- Install updates on the computer and restart it.
- Open Smart Switch again.
- If it still crashes, uninstall it, restart, and download a fresh copy from Samsung.
- If the phone is not recognized, tap Allow on the file-transfer prompt on the phone.
- If no prompt appears, disconnect, restart the phone, choose Reinstall device driver from the three-dot menu in Smart Switch and reconnect.
Samsung adds that if Smart Switch works on another computer, the first computer likely has its own hardware or software problem.
Common causes Samsung lists
Samsung’s regional support page for Android transfers names several conditions that interrupt Smart Switch.
| Cause | What to do |
|---|---|
| Unstable Wi-Fi or interference | Join the same Wi-Fi network on both phones |
| Phones too far apart | Keep them close for the whole transfer |
| Low storage on the new phone | Check that it has enough free space |
| Background apps | Close unnecessary apps on both phones |
| Dropped wireless connection | Restart both phones, then retry or use a wired connection |
The page does not tie each fix to a single cause, so treat the list as a checklist.
After the transfer
Samsung’s regional page notes that the old phone needs its lock screen enabled for at least 24 hours for account authentication.
It also warns that duplicate contacts may be merged based on the sorting method of the Samsung Gallery app.
It also says schedules, photos and videos may not sync if synchronization was turned off on the source phone.
Notifications about apps still installing may keep appearing after you close Smart Switch, according to the same page.
Apps with locked data, such as Secure Folder, move separately, as our Secure Folder guide explains.
When to contact Samsung
Samsung’s transfer troubleshooting says to contact Samsung Customer Support if the problem continues after you clear the cache and retry.
Samsung’s pages also note that screens and settings may vary by wireless provider, software version and phone model.
Have both phone models and the exact error text ready before you call or chat.
Related reading and sources
For the full move to a new phone, see how to transfer data to a Samsung Galaxy.
Sources: Samsung’s new phone can’t connect to a previous Samsung phone, wireless transfer fails and transfer did not complete pages.