|

How To Open The Run Dialog In Windows 11 (2026)

The Run dialog is a small box in Windows 11 that opens a tool, folder or app when you type its name.

Press Windows key + R to open it.

Type the command, then press Enter.

Quick answer: open Run and the commands people use most

What you wantWhat to do
Open the Run dialogPress Windows key + R
Open it with the mouseRight-click Start and select Run
System ConfigurationType msconfig and press Enter
System InformationType msinfo32 and press Enter
Registry EditorType regedit and press Enter
Control PanelType control and press Enter
Your startup folderType shell:startup and press Enter

Every command in this guide is one that Microsoft lists on its own support pages, unless a line says otherwise.

Open the Run dialog

There are two ways to open it.

  1. Press Windows key + R on the keyboard.
  2. Or right-click the Start button and select Run.
  3. Type the command in the box.
  4. Press Enter.

The right-click route is the one Microsoft uses in its startup apps instructions.

It helps when a keyboard shortcut is not working.

Run commands that open Windows tools

Microsoft lists these commands on its System configuration tools page for Windows 11 and Windows 10.

Type thisIt opensMicrosoft’s note
msconfigSystem ConfigurationBack up the system before changing anything
msinfo32System InformationRun as administrator for accurate driver and service details
compmgmt.mscComputer ManagementAlso on the right-click Start menu
eventvwr.mscEvent ViewerAlso on the right-click Start menu
controlControl PanelAlso found by searching the Start menu
regeditRegistry EditorBack up the registry first
gpedit.mscLocal Group Policy EditorNot available on Windows Home
SystemPropertiesAdvancedAdvanced System SettingsIncorrect settings can affect stability

After each command, press Enter.

Microsoft also says each of these tools can be found by searching for its name in the Start menu.

What msconfig shows

Fix guides often ask you to open System Configuration, which is the tool behind the msconfig command.

Microsoft lists five tabs in it.

  • General
  • Boot
  • Services
  • Startup
  • Tools

Microsoft notes that the Startup tab redirects to Task Manager in newer versions of Windows.

To manage startup apps directly, see how to disable startup apps in Windows 11.

Microsoft advises creating a system backup before you change anything in System Configuration.

If the PC was set to start in safe mode from this tool, our safe mode guide covers getting in and out.

Run commands that open folders

Some Run commands open a folder in File Explorer instead of a tool.

Microsoft uses three of them in its instructions for startup apps.

Type thisIt opensFolder path Microsoft gives
shell:appsfolderA list of every installed appNot a normal folder
shell:startupStartup folder for your account%userprofile%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
shell:common startupStartup folder for all users%ProgramData%\Microsoft\Windows\Start Menu\Programs\Startup

Use Run to make an app start with Windows

This is Microsoft’s File Explorer method for apps that have no startup switch in Settings.

  1. Right-click Start and select Run.
  2. Type shell:appsfolder and press Enter.
  3. Leave that File Explorer window open.
  4. Right-click Start and select Run again.
  5. Type shell:startup for your account only, or shell:common startup for all users, and press Enter.
  6. Drag the app from the first window to the second window.

To stop the app starting with Windows, delete its link from the second window.

For most apps the simpler route is Start > Settings > Apps > Startup, where each app has an On or Off switch.

Check startup apps in Task Manager instead

Because the msconfig Startup tab now points to Task Manager, Microsoft gives these steps for it.

  1. Right-click Start and select Task Manager.
  2. Select the Startup apps tab.
  3. Select the app.
  4. Select Enable to start it at sign-in, or Disable to stop it starting automatically.

Task Manager also rates how much each app slows sign-in.

RatingWhat Microsoft says it means
NoneThe app is disabled
Not MeasuredNo data yet, and the app is enabled
Low ImpactUnder 300 ms of CPU time and under 292 KB of disk use
Medium ImpactBetween 300 ms and 1 second of CPU time, or between 292 KB and 3 MB of disk use
High ImpactOver 1 second of CPU time, or over 3 MB of disk use

Open Terminal or Command Prompt from Run

Microsoft’s tools page does not list these two, so this section rests on How-To Geek’s guides instead.

According to How-To Geek, typing wt in Run opens Windows Terminal and typing cmd opens Command Prompt.

It also reports that pressing Ctrl + Shift + Enter instead of Enter opens them with administrator rights.

Repair commands need those rights, as in running SFC and DISM in Windows 11.

Tools you can open without Run

Several tools have a faster route than the Run dialog.

ToolFastest way, per Microsoft
SettingsWindows key + I, or right-click Start and select Settings
Task ManagerCtrl + Shift + Esc, or right-click Start and select Task Manager
Computer ManagementRight-click Start and select Computer Management
Event ViewerRight-click Start and select Event Viewer

For driver problems, our Device Manager guide covers updating, rolling back and reinstalling a driver.

Why gpedit.msc will not open on some PCs

Microsoft states that the Local Group Policy Editor is not available on Windows Home editions.

On a Home PC the gpedit.msc command therefore has nothing to open.

Microsoft adds that only experienced administrators should use the tool.

Tools to be careful with

Run opens powerful tools as easily as harmless ones, and Microsoft attaches a warning to four of them.

ToolMicrosoft’s caution
System ConfigurationCreate a system backup before making changes
Registry EditorBack up the registry first
Local Group Policy EditorFor experienced administrators only
Advanced System SettingsIncorrect settings can affect stability

Looking at a tool does no harm.

The risk comes from changing values you were not told to change.

Get an accurate report from msinfo32

System Information is a read-only report, so it is safe to open.

Microsoft’s tip is to run it with administrator privileges, because that gives accurate reporting of drivers and services.

The same page says you can also find the tool by searching for it in the Start menu.

When a guide asks for Event Viewer or Computer Management

Type eventvwr.msc and press Enter to open Event Viewer.

Type compmgmt.msc and press Enter to open Computer Management.

Both are also on the menu that appears when you right-click Start.

Which Windows versions this covers

Microsoft’s page for these commands applies to Windows 11 and Windows 10.

The page was last updated in May 2026.

The commands were checked against it on November 20, 2026.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *