How To Partition A Hard Drive In Windows 11 (2026)
To partition a hard drive in Windows 11 without losing data, you shrink an existing volume in Disk Management and make a new volume from the space that frees up.
Microsoft says this works on basic volumes without adding a disk or reformatting.
This guide covers the Disk Management steps, the DiskPart alternative, and why the shrink amount is often smaller than you expect.
Quick answer: create a new partition
| Step | What to do |
|---|---|
| 1 | Open Disk Management |
| 2 | Right-click the volume you want to shrink and select Shrink Volume |
| 3 | Enter the amount to shrink, in MB |
| 4 | Right-click the new Unallocated space and select New Simple Volume |
| 5 | Follow the wizard to set the size, letter and format |
What Microsoft requires
Microsoft’s Shrink a basic volume page applies to Windows 11 and sets a few conditions.
| Requirement | Detail |
|---|---|
| Account | Member of the Backup Operators or Administrators group |
| Volume type | A basic volume, meaning a primary partition or logical drive |
| File system | NTFS, or no file system (raw) |
| Free space | The freed space comes from the end of the volume, on the same disk |
Microsoft’s Disk Management page also warns that you cannot format a disk or partition that is in use, including the one that holds Windows.
Shrink a volume in Disk Management
- Right-click Start and select Disk Management, or run
diskmgmt.msc. - Right-click the basic volume you want to shrink.
- Select Shrink Volume.
- Enter the amount of space to shrink, in MB, and follow the on-screen instructions.
Microsoft says the freed space becomes unallocated space that you can use to create a new partition.
Create the new partition
- Right-click the Unallocated space and select New Simple Volume.
- Select Next in the wizard.
- Enter a size in MB, or accept the maximum, then select Next.
- Accept the drive letter or choose another, then select Next.
- Choose whether to format the volume now with the default settings, then select Next.
- Review your choices and select Finish.
Microsoft says this step needs unallocated space or free space inside an extended partition, which is why you shrink first.
Change the letter afterward
If the new partition gets a letter you do not like, follow our guide to changing a drive letter in Windows 11.
The setup steps for a fresh disk are covered in how to set up a new hard drive or SSD.
Primary and logical partitions
Microsoft says a basic disk holds primary partitions, extended partitions and logical drives, which together are called basic volumes.
On a basic disk, the first three partitions are primary, and from the fourth onward they become logical drives inside an extended partition.
Microsoft adds that you can only create basic volumes on basic disks.
Format choice at the end of the wizard
You can format the new volume as part of the wizard or skip that choice and format it later.
| Format type | What Microsoft says |
|---|---|
| Quick format | Builds a fresh file table without wiping the whole volume |
| Normal format | Erases all existing data completely, so it is slower |
Formatting a volume destroys any data on that partition, so only format the new, empty one.
Shrink with DiskPart
- Open an elevated Command Prompt and run
diskpart. - Type
list volumeand note the number of the volume. - Type
select volume <number>. - Type
shrink desired=10240 minimum=5120, thenexit.
Microsoft’s example shrinks the volume by 10 GB if possible, or by at least 5 GB, with both values in megabytes.
| DiskPart parameter | Behavior |
|---|---|
| desired= | The amount to reclaim; if it is possible, the volume shrinks by that amount |
| minimum= | The least you will accept; used if desired is too large |
| Neither given | The command reclaims the maximum possible space |
Why you cannot shrink as far as you want
Microsoft says the paging file and the shadow copy storage area cannot be relocated automatically.
The volume cannot shrink past the point where those files sit, so the amount offered is not the same as the free space on the drive.
Other unmovable files, including those named in Event ID 259, can also block the operation.
If the volume has too many bad clusters, Microsoft says the partition cannot be shrunk at all.
What to do when the shrink stops short
- Open Event Viewer, go to Windows Logs then Application, and look for an event with ID 259, which names the unmovable file.
- Move the paging file or the stored shadow copies to another disk if one of them is the blocker.
- Delete the stored shadow copies, shrink the volume, then move the paging file back.
- Check the disk for errors, as in our drive error check guide.
Extending a volume later
Microsoft says you can extend a basic volume into the next contiguous unallocated space on the same disk if it uses NTFS.
In Disk Management, right-click the volume and select Extend Volume, then follow the wizard.
| Extend limit | Detail |
|---|---|
| File system | The volume must be NTFS |
| Space | The unallocated space must be directly next to the volume on the same disk |
| Page file | A partition cannot be extended while the system page file is on it |
| Boot volume | Extension may be blocked, and only contiguous space can be used |
That contiguous rule means space shrunk from one partition cannot always be added to a partition that is not next to it.
Warnings before you resize
Microsoft warns that shrinking a raw partition that contains data, such as a database file, might destroy the data.
Back up your files before you change any partition, for example with our File History guide.
Microsoft also says not to move data off a drive with many bad clusters using a block-level copy, because that can mark good sectors on the new disk as bad.
Related Windows 11 guides
- How to fix a USB drive not showing up in Windows 11
- How to format a USB drive in Windows 11
- How to free up disk space on Windows 11