How To Check And Repair Drive Errors In Windows 11 (2026)
You can check a drive for errors in Windows 11 from File Explorer or with the chkdsk command in an administrator Command Prompt.
The File Explorer method is the easier one, and chkdsk gives you more control when a drive will not repair.
This guide covers both, explains the common chkdsk options, and shows where to read the results.
Quick answer: which method to use
| Situation | Method |
|---|---|
| You want a simple scan of an internal or external drive | File Explorer, then Properties, Tools, Check |
| The drive needs fixing and you want control | Command Prompt as administrator, then chkdsk D: /f |
| You suspect bad sectors | chkdsk D: /r, which takes longer |
| Windows says the drive is in use | Type Y to schedule the check for the next restart |
Check a drive in File Explorer
- Open File Explorer and select This PC in the left pane.
- Under Devices and drives, right-click the drive and select Properties.
- Select the Tools tab.
- Under Error checking, select Check.
- Select Scan drive.
If no errors are found, select Close, and if some errors cannot be repaired, Windows offers to schedule a scan for the next restart.
What the scan prompts mean
ElevenForum’s guide describes the wording you may see after you select Check.
| Message or button | What to do |
|---|---|
| You don’t need to scan the drive, on a removable drive | Select Scan and repair drive |
| You don’t need to scan the drive, on an internal drive | Select Scan drive |
| Errors were found | Select Repair drive |
| Show Details | Opens the chkdsk log in Event Viewer |
Larger drives, and drives with problems, take longer to scan.
Check a drive with chkdsk
- Select Start, search for Command Prompt, right-click it, and select Run as administrator.
- Type
chkdsk C: /fand press Enter, replacing C: with the letter of your drive. - If Windows says the drive is in use, type Y and press Enter to schedule the check.
- Restart the PC and let the check finish.
Microsoft says you need membership in the local Administrators group to run chkdsk.
The chkdsk options that matter
Microsoft says that chkdsk run on its own only reports the status of a volume and fixes nothing.
| Option | What it does |
|---|---|
| /f | Fixes errors on the disk, and the disk must be locked |
| /r | Locates bad sectors and recovers readable data, and includes /f |
| /x | Dismounts the volume first if needed, and includes /f |
| /scan | NTFS only, runs an online scan on the volume |
| /spotfix | NTFS only, runs spot fixing on the volume |
| /offlinescanandfix | Runs an offline scan and fix on the volume |
Pureinfotech suggests starting with /f and moving to /r if problems persist.
Why Windows asks to restart
Microsoft says chkdsk cannot fix errors on a drive that has open files.
When the drive is in use, you see a message asking whether to schedule the volume to be checked the next time the system restarts.
If you choose Y, the check runs and fixes errors automatically at the next restart, and a boot partition restarts the PC automatically after the check.
How long it takes
Microsoft says chkdsk /f on a disk with millions of files can take a long time.
It adds that /r or /b can take hours on a large hard disk because every sector is read.
Interrupting the check is not recommended, although Microsoft says it should not leave the volume more corrupt than before, and running it again should repair what is left.
Read the results
Microsoft gives the exit code chkdsk returns when you run it from a script.
| Exit code | Meaning |
|---|---|
| 0 | No errors were found |
| 1 | Errors were found and fixed |
| 2 | Cleanup was performed, or none was done because /f was not specified |
| 3 | The disk could not be checked, or errors could not be fixed |
To read the log, open Event Viewer, expand Windows Logs, right-click Application, and select Filter Current Log.
Under Event sources, select Chkdsk and Wininit, then select OK.
Shorten an NTFS check
Microsoft lists two NTFS-only options that cut the running time of a check.
| Option | What it does |
|---|---|
| /i | Performs a less thorough check of index entries |
| /c | Skips cycle checks within the folder structure |
| /perf | Used with /scan, it uses more system resources so the scan finishes faster and may slow other tasks |
Neither option is needed for a normal check, so use them only when time matters more than thoroughness.
Limits to know about
Microsoft says chkdsk works only on local disks, and it cannot run against a drive letter that is redirected over the network.
It also warns that running chkdsk without /f on an active partition can report errors that are not real, because the drive cannot be locked.
If a mapped network drive is your problem, see our map a network drive guide instead.
A warning for FAT drives
On FAT drives chkdsk may ask whether to convert lost chains to files.
Microsoft says Y saves each lost chain as a Filennnn.chk file in the root directory for you to review, while N repairs the disk but discards the contents.
If the drive will not repair
Microsoft’s Disk Management troubleshooting page says a failing disk is the most common reason a disk goes missing or unreadable.
Try another USB port directly on the PC, a different cable, and the drive on another computer.
If it fails on another computer too, Microsoft says the disk is likely faulty and you should try data recovery for important files.
For system files rather than a drive, see our SFC and DISM guide.
Related Windows 11 guides
- How to fix a USB drive not showing up in Windows 11
- How to safely eject a USB drive in Windows 11
- How to set up a new hard drive or SSD in Windows 11
- How to back up files to an external drive in Windows 11