How To Add A Printer To A Mac By IP Address (2026)

When your Mac cannot find a network printer in the normal list, adding it by IP address is the fix Apple itself points to.

The process takes a few fields in System Settings, but picking the wrong protocol or software is where most people get stuck.

This guide follows Apple’s documentation and explains each field.

Quick answer: add a printer by IP address on a Mac

  1. Open System Settings and click Printers & Scanners in the sidebar (scroll down if needed).
  2. Click Add Printer, Scanner, or Fax.
  3. Click the IP button.
  4. Enter the Address, Protocol, Queue, Name and Location, then check the Use menu.
  5. Click Add.
You needWhy
The printer’s IP address or host nameIt goes in the Address field
The protocol the printer usesAirPrint, IPP, LPD or HP Jetdirect – Socket
The queue name, if the printer uses oneLeave it blank if you do not know it
The printer model or software nameThe Use menu needs it to pick the right software

Prepare the printer and the Mac

Apple says to check with the printer maker for software updates first.

  • Unpack the printer, install ink or toner and add paper.
  • Turn it on and confirm it shows no errors.
  • Make sure the Mac and the printer are on the same Wi-Fi network for wireless printing.

Apple notes that macOS connects to most printers through AirPrint, which needs no app or extra drivers.

If the printer does not support AirPrint, install the software that came with it or download it from the manufacturer’s website.

Find the printer’s IP address

Apple tells you to get the address from the printer or your network administrator, and it does not list a method of its own.

Brother documents one clear method for its printers: print the Network Configuration Report from the control panel.

  1. On the control panel, highlight Print Reports and confirm with OK.
  2. Highlight Network Config and press OK.
  3. Press Go to print the report.

The IP address appears on the printed report labeled IP Address, and Brother says that if it shows 0.0.0.0 you should wait one minute and print it again.

Other makers use their own menus, so check the manual or support page for your model.

Other ways to add a printer on a Mac

The IP button is only one of the options in the Add Printer, Scanner, or Fax window.

Printer typeWhat Apple says to do
Wi-Fi or network printerSelect it from the list and click Add
USB printerConnect the cable, using a multiport adapter if the Mac has only one USB-C port
Bluetooth printerPut the printer in pairing mode, select it and click Add
Printer needing a configuration profileSelect the AirPrint Profile entry and click Add
Printer shared by a Windows computerClick the Windows button and browse to the printer

Some Wi-Fi printers need a temporary USB connection during setup, and Apple says you can disconnect the cable afterward.

What goes in each field

FieldWhat to enter
AddressThe IP address, such as 192.168.20.11, or a host name such as printer.example.com
ProtocolChoose the protocol your printer supports
QueueThe printer’s queue name; leave blank if unknown
NameA descriptive name shown in the Printer pop-up menu
LocationWhere the printer is, shown in the Printer pop-up menu
UseThe software for the printer

Name and Location are labels only, so they do not affect whether the printer works.

Choose the right protocol

ProtocolWhat Apple says it is for
AirPrintWi-Fi, USB or Ethernet access to printing and scanning features, with no driver download
Internet Printing Protocol (IPP)Modern printers and print servers
Line Printer Daemon (LPD)Some older printers and print servers
HP Jetdirect – SocketHP and many other manufacturers

If one protocol fails, remove the entry and try the next that your printer supports.

Set the printer software in the Use menu

The Use menu shows the software Mac will use for the printer.

  1. If nothing appears, choose Select Software.
  2. Pick your printer from the Printer Software list.
  3. If it is missing, download the driver from the manufacturer.
  4. As a last resort, try a generic PostScript or PCL driver, depending on your printer type.

Apple warns that printers connected through generic protocols may have limited features.

What to do after you click Add

Apple says to wait a minute or two for the printer to appear.

If macOS asks to download software, install it.

If macOS cannot detect installed accessories such as extra paper trays, memory or a duplex unit, a dialog appears, and you should specify them accurately so you can use them.

If the printer still will not print

Apple’s printing-problems page suggests a short sequence.

  1. Confirm the Mac and printer are on the same working network and that you chose the right printer.
  2. Open the printer’s queue from the Print Center icon in the Dock and click Resume if it shows paused.
  3. Test printing from a different app such as TextEdit.
  4. Check the Driver version under Printers & Scanners and ask the manufacturer about updates.
  5. Add the printer again to create a new queue, and delete the old one if the new one works.

Our guide to Mac printer communication problems covers more causes.

If the Mac still shows a network printer as unreachable, our HP printer offline guide and Brother Wi-Fi guide cover the printer side.

Printing to a printer shared by a Windows computer

Apple requires that the printer’s owner has shared it first.

The printer and computer names may use only the letters A to Z and a to z and the numbers 0 to 9, with no spaces.

  1. Go to System Settings > Printers & Scanners.
  2. Click Add Printer, Scanner, or Fax, then click the Windows button.
  3. Select the workgroup, then the print server, then the printer.
  4. Choose the software in the Use pop-up menu, then click Add.

Remove a printer or reset the printing system

To remove a single printer, Control-click it in Printers & Scanners and choose Remove Printer, then confirm.

As a last resort, Control-click anywhere in the Printers list and choose Reset Printing System.

Apple warns that this deletes all printers, completed print jobs and printer presets, so you must add your printers again.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *