How To Fix An iPad That Won’t Turn On Or Is Frozen (2026)

An iPad with a black screen, a frozen screen or a stuck Apple logo can feel dead even when it is not.

Apple’s fix starts with a force restart, then moves to charging checks and, if the iPad hangs during startup, recovery mode on a computer.

The button sequence depends on whether your iPad has a Home button, so check that first.

Quick answer: match the symptom to the fix

What you seeWhat to try first
Black screen that does not respondForce restart, then charge the iPad if it still will not turn on
Frozen screen that ignores tapsForce restart
Apple logo, red screen or blue screen that never goes awayRecovery mode on a computer, then choose Update
Screen works but the iPad is slow to respondA normal restart
Nothing worksRequest service from Apple

First: does your iPad have a Home button

Apple gives two different button sequences, one for iPads without a Home button and one for iPads with a Home button.

If your iPad has a round button below the screen, use the Home button steps.

If it has a flat edge-to-edge screen, use the steps for an iPad without a Home button.

Try a normal restart if the screen still responds

A normal restart is gentler than a force restart and fits an iPad that is slow but not frozen.

MethodSteps from Apple
iPad without a Home buttonPress and hold either volume button and the top button until the power off slider appears, drag the slider, wait 30 seconds, then press and hold the top button until the Apple logo appears
iPad with a Home buttonPress and hold the top button until the slider appears, drag it, wait 30 seconds, then press and hold the top button until the Apple logo appears
Control Center (iOS 18 and later)Swipe down from the top-right corner, press and hold the Power button, let go, drag the slider, wait 30 seconds, then hold the top button to turn it back on

Force restart an iPad that is black or frozen

Apple says a force restart is the first step when the screen is black or frozen.

For an iPad without a Home button, follow these steps:

  1. Quickly press and release the volume button nearest the top button.
  2. Quickly press and release the volume button farthest from the top button.
  3. Press and hold the top button until the Apple logo appears.

Apple does not give a hold time beyond waiting for the Apple logo, so keep holding until it shows.

For an iPad with a Home button, press and hold the Home button and the top button together until the Apple logo appears.

If the iPad still will not turn on, charge it

Apple says that if the iPad still will not turn on after a force restart, you should follow its hardware and charging checks.

Apple notes that charging may take up to an hour before the iPad responds.

Connect the iPad to a USB charging cable, preferably the one that came with it, and plug it into a working power adapter.

If it does not respond to the charger, try a different adapter or cable, and make sure the iPad is not too hot or too cold.

Our full guide on an iPad that will not charge covers the cable, adapter and temperature checks in detail.

Rule out heat and cold

Apple says the iPad is meant to be used at 0 to 35 degrees C (32 to 95 degrees F) ambient temperature.

Use outside that range can temporarily shorten battery life and may cause the device to shut off.

If a temperature warning screen appears, Apple says to turn the device off, move it to a cooler place away from direct sunlight and let it cool down.

If the iPad is cold, let it return to a normal temperature before you decide it is broken, because battery life returns to normal at higher temperatures.

If the iPad is stuck on the Apple logo or a red or blue screen

Apple treats a startup hang as a separate problem from a frozen screen.

If the iPad turns on but gets stuck on the Apple logo, a red screen or a blue screen, use recovery mode with a computer.

Your computerApp to open
Mac with macOS Catalina 10.15 or laterFinder
Mac with macOS Mojave or earlieriTunes
Windows PCThe latest Apple Devices app or iTunes

Recovery mode on an iPad without a Home button

  1. Connect the iPad to the computer and open the app from the table above.
  2. Make sure the computer shows your device.
  3. With the iPad still connected, quickly press and release the volume button nearest the top button.
  4. Quickly press and release the volume button farthest from the top button.
  5. Press and hold the top button until the Apple logo appears, and keep holding it until the recovery mode screen appears.
  6. When you are offered Restore or Update, choose Update.

Recovery mode on an iPad with a Home button

  1. Open Finder, iTunes or the Apple Devices app, depending on your computer.
  2. Connect the iPad and make sure the computer shows it.
  3. Press and hold the Home button and the top button together, and keep holding them.
  4. Keep holding the top button until the recovery mode screen appears.
  5. When you are offered Restore or Update, choose Update.

Apple’s page asks you to choose Update, not Restore, when the computer offers both.

What happens during the recovery download

After you choose Update, the computer downloads the software for your iPad.

If that download takes more than 15 minutes, the iPad exits recovery mode on its own.

When that happens, repeat the connection and button steps from the beginning.

If you also need help updating normally, see our guide to a software update that fails or gets stuck.

When to request service

Apple says that if the iPad still does not work after these steps, it may need service.

Apple’s support page links to a service request, so use that instead of repeating the steps endlessly.

If the iPad turns on but the picture is wrong, our guide to inverted colors on an iPad covers a display setting rather than a hardware fault.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *