How To Fix An iPad With No Sound Or Distorted Sound (2026)
An iPad with no sound, or sound that crackles, is most often muted by a setting rather than broken.
This guide follows Apple’s support pages for speaker problems, headphone problems and the iPad volume controls.
Work through the steps in order, testing the sound after each one.
Quick answer: what to check first
Apple’s speaker checklist starts with the settings that silence an iPad.
| Check | Where |
|---|---|
| Silent mode | Swipe down from the top-right corner to open Control Center and confirm Silent mode is off |
| Do Not Disturb | Settings > Focus > Do Not Disturb, and make sure it is off |
| Cases and films | Remove screen protectors, films and cases |
| Speaker opening | Look for blockage or dirt |
| Speaker test | Settings > Sounds, then drag the Ringtone and Alerts slider |
Turn off Silent mode
On an iPad, Apple says to open Control Center and confirm that Silent mode is off.
- Swipe down from the top-right corner of the screen to open Control Center.
- Look at the Silent mode button.
- Tap it again if Silent mode is on.
Apple notes that Silent mode does not mute music, podcasts, movies or TV shows, so a silent video points to a different cause.
Turn off Do Not Disturb
A Focus can silence notifications and alerts.
- Open Settings.
- Tap Focus.
- Tap Do Not Disturb and make sure it is off.
Apple suggests using a Focus to silence specific notifications instead of muting every sound.
Raise the volume
The volume buttons and the Control Center slider both change the level, and the buttons behave differently depending on what is playing.
| Method | What happens |
|---|---|
| Volume buttons on the side | Control media volume while audio is playing, and ringer and alert volume at other times |
| Control Center slider | Drag the volume slider while the iPad is locked or in an app |
| Siri | Ask Siri to turn the volume up or down |
| Press and hold Volume Down | Mutes quickly |
Check the volume buttons and alert volume
If the buttons move the media volume but alerts stay quiet, the alert volume may be set separately.
- Go to Settings > Sounds and turn off Change with Buttons to lock alert volume, so the buttons control only media playback.
- In Settings you can also set separate volumes for alarms and timers, and for alerts and system sounds.
Look for a volume limit
A limit set in Settings can keep the speaker or headphones quieter than you expect.
| Setting | Path |
|---|---|
| Limit speaker volume | Settings > Sounds > Built-In Speaker > Volume Limit, then Limit Maximum Volume and its slider |
| Soften loud speaker sounds | Settings > Sounds > Built-In Speaker > Reduce Loud Sounds |
| Limit headphone volume | Settings > Sounds > Headphones > Reduce Loud Audio, then its slider |
If Screen Time is set up for a family member, the Content & Privacy Restrictions under Settings > Screen Time can lock these levels with Don’t Allow.
Remove cases, films and protectors
Anything covering the speaker openings can muffle the sound.
Apple says to remove screen protectors, films and cases, then test again.
Inspect and clean the speaker opening
Look at the speaker opening for blockage or dirt.
If it needs cleaning, Apple says to use a small, soft-bristled brush that is clean and dry.
Do not use a damp brush or anything that could push debris deeper into the opening.
Test the speaker from Settings
This test shows whether the speaker responds at all.
- Open Settings, then tap Sounds. On some models, tap Sounds & Haptics instead.
- Drag the Ringtone and Alerts slider back and forth a few times.
- Listen for sound, and check whether the speaker button on the slider is dimmed.
If you hear nothing, or the speaker button is dimmed, Apple says the speaker may need service.
Test with a FaceTime call
On an iPad, Apple suggests making a FaceTime call to test sound.
If you still hear nothing, or you hear static or crackling, the problem may be your network or reception.
Try the call again later or from a different location, and note that FaceTime is not available in all countries or regions.
If the problem is only with wired headphones
Apple’s headphone page starts by making sure the iPad runs the latest iPadOS and then restarting it.
- Check the headphone port for debris.
- Check the cable, connector, remote and earbuds for wear or breakage.
- Gently brush all openings on each earbud with a small, clean, dry, soft-bristled brush.
- Firmly reconnect the headphones, removing the case if it blocks the connection.
- Try a second pair of headphones.
If the second pair works, ask the first pair’s manufacturer about a replacement, and if it does not, contact Apple Support.
Wireless earbuds have their own steps in our guide to AirPods connected but no sound.
If headphones play on one side only or the microphone fails
Apple’s headphone page treats low or one-sided sound and a dead microphone as separate problems.
| Problem | What Apple says to do |
|---|---|
| No sound, or only one side works | Adjust the volume with the volume buttons or the Control Center slider, then try a second pair of headphones |
| Second pair works | Contact the maker of the first pair and ask whether you need a replacement |
| Second pair does not work | Contact Apple Support |
| Microphone does not work | Confirm the headphones have a built-in microphone, check it for debris, lint or plastic packaging, then try a second pair |
Which result points to what
These pairings come straight from the steps above and help you decide when to stop troubleshooting.
| What you notice | What it suggests |
|---|---|
| Slider moves but media is silent | A volume limit or Reduce Loud Sounds setting may be holding it down |
| No sound at all from the speaker test, or the speaker button is dimmed | The speaker may need service |
| Static or crackling on a FaceTime call | Possibly your network or reception, so try again later or elsewhere |
| Alerts quiet but media loud | Alert volume may be set separately, so check Settings > Sounds |
When the iPad needs service
If sound is still missing after these steps, Apple says the device may need service through its Get service page.
Official pages used: If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker, If your headphones don’t work with your iPhone or iPad and Adjust the volume and silence on iPad.