How To Fix An iPad Bluetooth Accessory Not Connecting (2026)

A Bluetooth keyboard, mouse, speaker or other accessory that will not connect to an iPad is usually a pairing-mode, power or stale-pairing problem.

This guide follows Apple’s support pages for Bluetooth accessories on iPhone and iPad, including the steps for a mouse or trackpad.

Try the quick checks first, then unpair and pair again if needed.

Quick answer: what to try first

Apple’s first four checks cover most accessories.

StepWhat to do
1If the accessory worked with this iPad before, keep them close together, and if you never paired them, put the accessory in discovery mode first
2Turn the accessory off, then back on
3Make sure it is on and fully charged or plugged in, and replace batteries if it uses them
4If an app uses the accessory, go to Settings > Privacy & Security > Bluetooth and make sure Bluetooth is on for that app

Make sure Bluetooth is on

Pairing starts in Settings.

  1. Open Settings.
  2. Tap Bluetooth.
  3. Make sure Bluetooth is on.
  4. Look for the accessory under My Devices or in the list of nearby devices.

Apple says the iPad must be within about 33 feet (10 meters) of the accessory to pair.

Put the accessory in discovery mode

An accessory that is not discoverable will never show up in the list.

Check the accessory’s manual or the maker’s online instructions for how to make it discoverable over Bluetooth.

For a third-party accessory that was used with another device, follow the maker’s pairing-mode steps.

Pair the accessory

Once the accessory is discoverable, pair it from Settings.

  1. Go to Settings > Bluetooth.
  2. Tap the accessory’s name when it appears.
  3. Enter a PIN or passcode if you are asked, using the accessory’s instructions.
  4. Follow any onscreen instructions.

For an Apple Magic Mouse or Magic Trackpad, Apple says that if a code is requested you should enter 0000 (four zeros).

Check power and charge

A flat battery is a common reason an accessory refuses to connect.

  • Make sure the accessory is on.
  • Make sure it is fully charged or plugged in.
  • If it uses batteries, check whether they need replacing.

Unpair the accessory and pair it again

If the accessory used to connect to this iPad and now will not, Apple says to unpair it and start over.

  1. Open Settings and tap Bluetooth.
  2. Tap the More Info button (the “i” icon) next to the accessory.
  3. Tap Forget This Device and confirm.
  4. Put the accessory back in discovery mode.
  5. Pair and connect it again.

Unpairing removes the accessory from all devices signed in to the same Apple Account.

If it pairs with other devices but not your iPad

Apple’s advice here is to clear the accessory’s other connections.

  1. Unpair the accessory from your other devices.
  2. Try pairing it with the iPad again.

Reduce interference

Apple says some accessories can affect wireless performance, and not all of them are fully compatible with iPad.

SituationWhat Apple suggests
Accessory seems to cause connection troubleMove the iPad or the accessory, which may improve wireless performance
Audio is affectedTurn on Airplane Mode, which may reduce audio interference between the iPad and the accessory
Warning about Wi-Fi and Bluetooth connectivity with a mouse or trackpadDisconnect accessories you are not using, as interference is more likely when several are connected and active

Using several accessories at once

You can pair more than one accessory, and each one is paired by repeating the same steps.

When several Bluetooth devices are paired, you can choose which one supplies audio, and Apple has a separate article on choosing an audio source.

After the first pairing, an accessory appears under My Devices in Settings > Bluetooth, and you tap its name to reconnect it while it is disconnected.

Having many accessories connected and active at the same time is also when interference is more likely.

Rename an accessory so you can tell them apart

With several accessories paired, a clear name makes it easier to pick the right one.

  1. Open Settings and tap Bluetooth.
  2. Tap the info button next to the accessory.
  3. Tap Name, enter a new name, and tap Done.

Not all Bluetooth accessories support renaming.

Disconnect accessories you do not use

You can disconnect one accessory without forgetting it.

  1. Go to Settings > Bluetooth.
  2. Tap the information button next to the accessory.
  3. Tap Disconnect.

To reconnect, tap its name under My Devices while it is disconnected.

Disconnect everything from Control Center

Control Center can switch off every Bluetooth connection at once without turning Bluetooth off.

Tap the Bluetooth button there, and Apple says your accessories stay disconnected until the next day.

If you did that by accident, reconnect from Settings > Bluetooth.

Mouse and trackpad notes

Apple’s page for Bluetooth mice and trackpads lists a few details that apply to those accessories only.

DetailWhat Apple says
Software needediPadOS 13.4 or later
Where it appearsUnder Other Devices in Settings > Bluetooth
Onscreen keyboard missingTap the keyboard button in the lower-right corner, then the show keyboard option
Battery levelAdd the Batteries widget in Today View

Keyboards, Apple Pencil and AirPods

Some accessories use other connections, so these guides may fit better.

Settings paths at a glance

These are the paths used in the steps above.

TaskPath
Turn Bluetooth on and pairSettings > Bluetooth
Unpair an accessorySettings > Bluetooth > info button > Forget This Device
Disconnect without forgettingSettings > Bluetooth > info button > Disconnect
Allow Bluetooth for an appSettings > Privacy & Security > Bluetooth
Disconnect everything until tomorrowControl Center > Bluetooth button

When to contact Apple or the maker

Apple lists three situations for contacting Apple Support.

  • Bluetooth will not turn on, or the Bluetooth setting is grayed out.
  • You cannot connect any Bluetooth accessories to the iPad.
  • The accessory’s manufacturer confirmed the accessory is working correctly.

If you are unsure whether the accessory is compatible, Apple says to contact the manufacturer.

Official pages used: If a Bluetooth accessory won’t connect to your iPhone or iPad, Connect a third-party Bluetooth accessory to your iPhone or iPad, Connect a Bluetooth mouse or trackpad to your iPad and Connect iPad to Bluetooth accessories.

Leave a Reply

Your email address will not be published. Required fields are marked *