How To Fix Apple Pencil Not Working Or Not Pairing (2026)

An Apple Pencil that will not pair, or will not write, is often the wrong model for the iPad, an unfinished pairing or a Bluetooth glitch.

Apple has one troubleshooting page for pairing, plus a compatibility list that settles whether your Pencil can work with your iPad at all.

This guide checks compatibility first, then follows Apple’s eight pairing steps in order.

Quick answer: what to try first

ProblemWhat to try
Pencil never shows a Pair promptAttach or plug it in the way your model requires, restart the iPad, then try again
Pair prompt does not appearLet the Pencil charge for one minute, reconnect it and wait for Pair
Pencil paired before but stopped workingSettings > Bluetooth, tap the info icon next to the Pencil, Forget this Device, then pair again
Pencil Pro or 2nd generation still will not pairRemove the iPad case or cover and try again
iPad 10th generation with a 1st generation PencilYou need the USB-C to Apple Pencil Adapter and a compatible USB-C cable
Still no Pair promptRequest service through Apple’s support site

Before you start: update the iPad and check the Pencil

Apple tells you to update your iPad to the latest software before troubleshooting the Pencil.

Confirm that your Apple Pencil model works with your iPad, because not every Pencil works with every iPad.

You may also need to charge the Pencil before it will pair.

If a software update will not install, our guide to fixing an update that fails or gets stuck can help.

Which Apple Pencil works with which iPad

Apple’s compatibility page lists four Pencil models and the iPads each one supports.

Apple PencilWorks with
Apple Pencil Pro (iPadOS 17.5 or later)iPad Pro 13-inch and 11-inch with M4 or M5; iPad Air 13-inch and 11-inch with M2, M3 or M4; iPad mini with A17 Pro or A20 Pro
Apple Pencil (USB-C) (iPadOS 17.1.1 or later)iPad Pro 13-inch and 11-inch with M4 or M5; iPad Pro 11-inch, 1st to 4th generation; iPad Pro 12.9-inch, 3rd to 6th generation; iPad Air 13-inch and 11-inch with M2, M3 or M4; iPad Air, 4th or 5th generation; iPad with A16; iPad, 10th generation; iPad mini with A17 Pro or A20 Pro; iPad mini, 6th generation
Apple Pencil (2nd generation)iPad mini, 6th generation; iPad Air, 4th or 5th generation; iPad Pro 12.9-inch, 3rd to 6th generation; iPad Pro 11-inch, 1st to 4th generation
Apple Pencil (1st generation)iPad mini, 5th generation; iPad, 6th to 9th generation; iPad Air, 3rd generation; iPad Pro 12.9-inch, 1st and 2nd generation; iPad Pro 10.5-inch; iPad Pro 9.7-inch; iPad with A16 and iPad, 10th generation with the USB-C to Apple Pencil Adapter

If your iPad is not on the list for your Pencil, no troubleshooting step will make them pair.

How each Apple Pencil connects

Apple’s pairing steps depend on which Pencil and which iPad you have.

Pencil and iPadHow to connect it
Apple Pencil Pro or 2nd generationAttach it to the magnetic connector on the iPad
Apple Pencil 1st generation with iPad 6th to 9th generationRemove the cap and plug the Pencil into the Lightning connector
Apple Pencil 1st generation with iPad 10th generationRemove the cap, plug the Pencil and a USB-C cable into the USB-C to Apple Pencil Adapter, then plug the cable into the iPad

Apple’s separate user guide pages cover first-time pairing for each model, including the Pencil Pro and the Pencil (USB-C).

Apple’s steps when the Pencil will not pair

  1. Connect the Pencil to the iPad using the method for your model in the table above.
  2. Keep the Pencil connected, restart the iPad and try pairing again.
  3. Go to Settings > Bluetooth and confirm that Bluetooth is on.
  4. Under My Devices, find the Apple Pencil, tap the info icon and tap Forget this Device.
  5. Reconnect the Pencil to the iPad and tap Pair when it appears, which usually takes a few seconds.
  6. If Pair does not appear, let the Pencil charge for one minute, reconnect it and wait for Pair.
  7. If an Apple Pencil Pro or 2nd generation still will not pair, remove any iPad case or cover and try again.
  8. If Pair still does not appear, contact Apple for service.

How to restart the iPad during pairing

Step 2 asks you to restart the iPad while the Pencil stays connected.

On an iPad without a Home button, press and hold either volume button and the top button until the power off slider appears, drag the slider and wait 30 seconds.

On an iPad with a Home button, press and hold the top button until the slider appears, drag it and wait 30 seconds.

Then press and hold the top button until the Apple logo appears.

If the iPad is frozen and will not restart, see our guide to an iPad that will not turn on or is frozen.

Forget the Pencil and pair it again

Forgetting the Pencil removes its current pairing so the iPad can pair with it from scratch.

Open Settings, tap Bluetooth, and look under My Devices for your Apple Pencil.

Tap the info icon next to it, tap Forget this Device, then connect the Pencil again and tap Pair when the prompt appears.

Charge the Pencil for a minute

Apple says the Pencil may need charging before it can pair, and a one-minute charge is the specific step to try when Pair does not appear.

Keep it attached the right way for your model while it charges, then wait for the Pair prompt.

If the iPad itself is not charging the Pencil, check the iPad’s own power first with our guide to an iPad that will not charge.

When to contact Apple

If the Pair prompt still does not appear after all eight steps, Apple points you to its support site to arrange service.

Tell Apple which Pencil model and which iPad model you have, because the compatibility rules above decide what should work.

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *