How To Turn On Resizable BAR For Intel Arc Graphics (2026)
Intel says Resizable BAR must be switched on for its Arc graphics cards to perform as intended.
The setting lives in your motherboard’s BIOS or UEFI, not in Windows, so you have to change it before Windows starts.
This guide follows Intel’s support pages and shows the exact settings, the boot-mode rules and what Intel Driver & Support Assistant messages mean.
Quick answer: the settings Intel tells you to change
| BIOS or UEFI setting | Value Intel gives |
|---|---|
| Boot mode | UEFI enabled |
| CSM or Legacy Mode | Disabled |
| Above 4G Decoding | Enabled, or Auto if there is no Enabled option |
| Re-Size BAR Support | Enabled, or Auto if there is no Enabled option |
| Motherboard firmware | The latest version that supports Resizable BAR |
What Resizable BAR does
Intel describes Resizable BAR as a PCI Express capability that lets a device such as a graphics card negotiate the size of its Base Address Register.
Intel’s gaming team explains that without it, data such as textures, shaders and geometry moves from system memory to the card in smaller and more numerous transfers.
It also says Arc cards show larger frame-time spikes during scene changes and level loads when the feature is off.
Intel adds that results vary by use and configuration.
Step 1: Check whether it is already on
Intel’s Arc guide names Intel Driver & Support Assistant as the tool that detects whether Resizable BAR is enabled.
The same guide lists Intel Graphics Software as a second place to check after the driver is installed.
If you still need the driver, this guide to updating an Intel graphics driver covers the install.
Step 2: Confirm your PC can do it
Intel’s Arc guide says the card needs a full-size PCI Express 3.0 or newer x16 slot with Resizable BAR enabled.
For the Arc B-Series cards, Intel lists these processor and motherboard pairings.
| Processor | Motherboard |
|---|---|
| Core Ultra | Intel 800 Series, with ReBAR enabled |
| 14th, 13th and 12th Gen Core | Intel 700 or 600 Series, with ReBAR enabled |
| 11th and 10th Gen Core | Intel 500 or 400 Series, confirm with the maker |
| Ryzen 9000, 8000 and 7000 | AMD 600 Series, with Smart Access Memory enabled |
| Ryzen 5000 and most 3000 (not 3000G) | AMD 500 Series, with Smart Access Memory enabled |
Intel notes that having integrated graphics or not does not affect whether Resizable BAR is available.
It also says unlisted platforms may work with the feature on, but may show performance or stability problems.
Step 3: Make sure Windows boots in UEFI mode
Intel requires UEFI boot mode, and the operating system must use the GPT partition style.
Windows 11 uses GPT by default, and Intel says a Windows 10 install on MBR can be converted with Microsoft’s MBR2GPT tool.
The related steps for reaching UEFI are covered in the TPM guide for Windows 11 and the virtualization guide.
Step 4: Open the BIOS or UEFI settings from Windows
Intel’s own route from Windows is the Advanced startup menu.
- Open Settings, then go to Recovery.
- Next to Advanced startup, choose Restart now.
- Select Troubleshoot, then Advanced options.
- Choose UEFI Firmware Settings.
Intel’s Resizable BAR article also mentions pressing the DEL key at startup, and says the key varies by manufacturer.
Step 5: Change the settings and save
- Disable CSM or Legacy Mode and enable UEFI boot mode.
- Set Above 4G Decoding to Enabled, or Auto if no Enabled option exists.
- Set Re-Size BAR Support to Enabled, or Auto if no Enabled option exists.
- Save the changes and let the PC restart.
- Run Intel Driver & Support Assistant to confirm Resizable BAR is active.
Intel says that on some systems the Resizable BAR option only appears after you enable Above 4G Decoding, save and restart.
If the option has another name
Intel says manufacturers may label the option Re-Size BAR, Smart Access Memory or Clever Access Memory.
Smart Access Memory is the name used on AMD platforms.
When you cannot find any of these, Intel tells you to contact your system manufacturer for specifics.
What the Driver & Support Assistant messages mean
| Message | Intel’s cause | What Intel says to do |
|---|---|---|
| Resizable BAR is not supported by the system firmware (BIOS) | The BIOS does not support Resizable BAR | Check the CPU and motherboard pairing, enable it on the board and contact the maker if unsure |
| Resizable BAR is required for optimal performance with Intel Arc A-Series Graphics | It is missing or not working, or the BIOS needs an update | Contact your system or motherboard manufacturer |
| Unable to check the Resizable BAR status of this system | DSA may have identified a third-party platform | Review the Arc requirements, then contact the manufacturer |
For the first message, Intel’s A-Series article lists these pairings: 12th Gen Core with an Intel 600 Series board, and 11th or 10th Gen Core with a 500 or 400 Series board.
Note for 10th Gen Intel Core systems
Intel says Resizable BAR support varies on 10th Gen platforms, so check with your system or motherboard maker.
For the A-Series cards, it adds that a platform firmware update is required on 10th Gen systems.
After you turn it on
Intel recommends always using the latest graphics driver from its support site.
To see how Windows is using the card afterwards, this guide to seeing which apps use the GPU shows the Task Manager view.
Intel warns that BIOS defaults may not be optimal for Arc, so review the maker’s BIOS guidance before changing other options.
When to contact support
Intel’s articles repeatedly point to the system or motherboard manufacturer for BIOS menu details and firmware updates.
The company does not describe board-specific BIOS menus, so your maker’s manual is the reliable source for exact menu names.
Official sources: What Is Resizable BAR and How Do I Enable It, Intel Arc Graphics guide, Resizable BAR not supported by BIOS message.