How To Check And Turn On TPM 2.0 In Windows 11 (2026)
Windows 11 will only install and run on a PC that has a working TPM 2.0 security chip.
You can check yours in about a minute with the Windows Security app or a built-in tool called tpm.msc.
If the chip is switched off, you turn it on in your PC’s UEFI firmware settings, and the steps below follow Microsoft’s own support page.
Quick answer
| What you want | Where to do it |
|---|---|
| See if your PC has a TPM | Windows Security > Device security > Security processor |
| See the TPM version | Security processor details, or Specification Version in tpm.msc |
| Turn the TPM on | UEFI firmware settings > Security, Advanced or Trusted Computing |
| What you need to see | Version 2.0 (1.2 does not meet Windows 11 requirements) |
Check TPM 2.0 in Windows Security
- Select Start, type Windows Security, and open the app.
- Select Device security.
- Look for a section called Security processor.
- Select Security processor details.
- Read the specification version, which should show 2.0.
Microsoft also gives a shortcut: paste windowsdefender://hardware/ into the Run box (Windows key + R) to open Device security directly.
Check TPM 2.0 with tpm.msc
- Press Windows key + R to open Run.
- Type tpm.msc and select OK.
- Read the status message in the middle of the window.
- Under TPM Manufacturer Information, find Specification Version.
The window should say the TPM is ready for use, and the specification version should be 2.0.
What the results mean
| What you see | What it means | What to do |
|---|---|---|
| Security processor shown, version 2.0 | The TPM is on and meets the Windows 11 requirement | Nothing; you are done |
| Security processor shown, version 1.2 | The TPM is on but too old for Windows 11 | Check your maker’s support site for a firmware upgrade path |
| No Security processor section | The TPM may be turned off | Turn it on in UEFI firmware (below) |
| “Compatible TPM cannot be found” in tpm.msc | The TPM may be disabled | Turn it on in UEFI firmware (below) |
Check Device Manager as a second opinion
Dell’s support page suggests a third check that works on any brand of PC.
- Right-click the Start button and select Device Manager.
- Expand Security devices.
- Look for Trusted Platform Module 2.0 with no warning icon.
If it shows a yellow triangle, Dell says to right-click it, choose Update driver, and search automatically.
Why Windows 11 needs TPM 2.0
A TPM is a security chip that stores encryption keys and helps confirm that Windows and the firmware have not been altered.
It can be a separate chip on the motherboard, or built into the processor, as in Microsoft Pluton.
Windows Hello keeps your PIN and biometric data in it, and BitLocker keeps its encryption keys in it.
Our guide to checking whether your PC can run Windows 11 covers the other requirements.
Before you change firmware settings
Save your work, because enabling the TPM means restarting the PC.
If your drive uses BitLocker, keep your recovery key handy, as our BitLocker recovery key guide explains.
Microsoft notes that most retail motherboards used for custom builds ship with the TPM turned off, but it is almost always available to enable.
If you are unsure about any change, check your PC maker’s support information or contact their support.
Open the UEFI firmware settings from Windows
- Open Settings and go to System > Recovery.
- Next to Advanced startup, select Restart now.
- Choose Troubleshoot > Advanced options > UEFI Firmware Settings.
- Select Restart.
Dell’s page also describes a key method: press F2 about once per second as the Dell logo appears.
Find the TPM setting
In the firmware, look for a sub-menu named Advanced, Security or Trusted Computing.
Microsoft says the option name differs by maker, and the table lists the names it gives.
| PC type | Setting name to look for |
|---|---|
| Intel PCs | Intel PTT or Intel Platform Trust Technology |
| AMD PCs | AMD fTPM switch or AMD PSP fTPM |
| Many other PCs | Security Device, Security Device Support or TPM State |
| Dell (from Dell’s page) | Trusted Platform Module, TPM 2.0 Security or Firmware TPM |
Set the option to Enabled or On, then save and exit.
Check again after saving
When Windows starts, repeat the Windows Security or tpm.msc check.
The specification version should now read 2.0.
Menu names differ from one model to the next, so use your owner’s manual if your screens do not match.
If the Security processor is still missing
Dell lists these checks when the TPM still does not work.
- Confirm that your device supports TPM 2.0.
- Update the BIOS to the latest version your maker recommends.
- Make sure Intel PTT or AMD fTPM is enabled.
- Look for a work or school management policy, because Dell says enterprise policies may disable the TPM.
Dell also says some systems cannot be upgraded from TPM 1.2 to 2.0.
For a chip that is on but not detected, see our TPM not detected guide.
Use Security processor troubleshooting
In Windows Security, open Device security and select Security processor troubleshooting.
The page lists TPM error messages, and some point to a firmware update or to enabling the TPM in firmware.
Others point to a Clear TPM button, which resets the security processor to its default settings.
Microsoft warns you to back up your data before you clear the TPM.
What Windows Security says about your hardware
The Device security page also rates your PC’s hardware security.
The first level, standard hardware security, means the device supports memory integrity and core isolation and has TPM 2.0, Secure Boot turned on, DEP and UEFI MAT.
Enhanced hardware security adds memory integrity turned on, and a message that standard hardware security is not supported means at least one of those requirements is missing.
Secure Boot is a separate setting
Standard hardware security in Windows Security needs TPM 2.0 and Secure Boot turned on, among other things.
Microsoft’s TPM page does not cover Secure Boot steps, so treat it as a separate check.
Our Secure Boot certificate update guide explains how Windows handles it.
Maker guides and official sources
Microsoft links to firmware instructions from ASUS, Dell, HP, Lenovo and Microsoft Surface.