|

How To Turn On Virtualization In Windows 11 (2026)

Virtualization is the processor feature that lets Windows run another operating system, such as Android or Linux, inside a virtual machine.

Many Windows PCs already have it switched on, so the first job is a ten-second check in Task Manager.

If it says Disabled, you turn it on in your PC’s UEFI firmware (often still called the BIOS), and the steps below follow Microsoft’s, Dell’s and BlueStacks’s own support pages.

Quick answer

What you wantWhere to do it
Check if it is already onTask Manager > Performance > CPU > Virtualization
Open the firmware settingsSettings > System > Recovery > Advanced startup > Restart now
Setting on an Intel PCIntel Virtualization Technology (VT-x)
Setting on an AMD PCAMD Virtualization (AMD-V), or SVM Mode on some boards
Last step in WindowsTurn on Virtual Machine Platform in Windows features

Check whether virtualization is already on

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. Select the Performance tab.
  3. Select CPU in the left-hand list.
  4. Read the Virtualization line at the bottom right.

BlueStacks’s support page says Enabled means it is on and Disabled means it is off.

Microsoft also notes that many Windows devices already have virtualization enabled, so you may not need to change anything.

Before you change firmware settings

Microsoft recommends opening its instructions on a second device, because you will be restarting your PC.

Write down your PC maker and model, because the menu names differ between brands.

ASUS warns that changing BIOS settings can trigger a BitLocker recovery prompt, so keep your BitLocker recovery key within reach.

Open the UEFI firmware settings from Windows

  1. Open Settings and select System > Recovery.
  2. Next to Advanced startup, select Restart now.
  3. Select Troubleshoot > Advanced options > UEFI Firmware Settings.
  4. Select Restart.

Microsoft says your PC then restarts into the UEFI utility, which your PC may call the BIOS.

The same screen is covered step by step in our safe mode guide, because Advanced startup also leads there.

If the UEFI Firmware Settings option is missing, BlueStacks says to restart and press your maker’s access key during startup instead, and to turn off Fast Startup first if the PC boots too quickly to catch it.

Find the right setting for your processor

ProcessorSetting name to look for
IntelIntel Virtualization Technology (VT-x); some Asus motherboards call it Intel(VMX) Virtualization Technology
AMDAMD Virtualization (AMD-V); BlueStacks shows it as SVM Mode
DellVirtualization, and Virtualization for Direct-IO (also called VT-d)

Microsoft’s page says the screens vary by manufacturer and links to guides for Acer, Asus, Dell, HP and Lenovo.

Microsoft also says to change only what you need, because other changes might stop you from reaching Windows.

Turn on virtualization on a Dell PC

  1. Restart the PC and press F2 when the Dell logo appears.
  2. Open Advanced > Virtualization, or Virtualization Support > Virtualization, depending on the model.
  3. Set Virtualization to Enabled.
  4. Set Virtualization for Direct-IO to Enabled.
  5. Save and exit so the computer restarts.

Dell says that on computers released in 2025 and later, the Intel VT-x option may be hidden, and that Ctrl + Alt + S unhides it.

Dell also says not every Dell computer supports virtualization, so a missing option can mean the system does not have it.

Turn it on in an Advanced Mode UEFI screen

BlueStacks describes a UEFI layout with an Advanced Mode button, which you reach by pressing F7.

StepIntel CPUAMD CPU
1Press F7 or select Advanced ModePress F7 or select Advanced Mode
2Advanced tab > CPU ConfigurationAdvanced tab > CPU Configuration
3Set Intel Virtualization Technology to EnabledSet SVM Mode to Enabled
4Exit and save changesExit and confirm with OK

BlueStacks adds that menu names vary by motherboard and manufacturer.

Surface devices

Microsoft says virtualization is already enabled on Surface devices, so there is nothing to switch on.

Turn on Virtual Machine Platform in Windows

  1. Select Start, type Windows features, and open Turn Windows features on or off.
  2. Find Virtual Machine Platform and tick it.
  3. Select OK and restart if Windows asks.

Microsoft says these steps might apply if you upgraded from Windows 10 to Windows 11.

If an app still cannot find the feature, our Windows Sandbox guide shows the same Windows features list for another virtualization-based feature.

If you still get error 0x80370102

Microsoft’s WSL troubleshooting page lists the message “The virtual machine could not be started because a required feature is not installed” and tells you to enable Virtual Machine Platform and make sure virtualization is on in the BIOS.

CheckWhat Microsoft says
Hypervisor launchRun bcdedit /enum | findstr -i hypervisorlaunchtype in an elevated PowerShell
If it shows OffRun bcdedit /set hypervisorlaunchtype Auto
Other hypervisorsUse VMware 15.5.5 or later and VirtualBox 6 or later, or turn them off
Old processorsWSL2 needs SLAT; Intel Core 2 Duo cannot run it even with the platform installed

If your Windows is itself running in a virtual machine, Microsoft says to enable nested virtualization on the host with Set-VMProcessor -ExposeVirtualizationExtensions $true.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *