How To Install Kali Linux NetHunter On Android (2026)

Kali Linux NetHunter is a penetration-testing environment for Android, and there are three ways to install it depending on whether your phone is rooted.

The right route is the one that matches your phone: a stock phone gets the rootless edition, and a rooted phone can run Lite or Full.

This guide follows Kali’s official NetHunter documentation as of November 2026, and the rootless install takes roughly 15 to 30 minutes on a normal connection.

Which NetHunter edition should you install?

EditionRoot neededNetHunter appMetasploit databaseWi-Fi injection, HID, Bluetooth Arsenal
RootlessNoNoNoNo
LiteYes (Magisk)YesYesNo
FullYes, plus a NetHunter kernel for your deviceYesYesYes

All three give you the Kali command line, Kali packages and KeX desktop sessions.

Installing the software is legal, but scanning or attacking networks and devices you do not own or have written permission to test is not.

Use it on your own lab, your own devices or an authorized engagement only.

What you need before you start

  • Stock phone for rootless: Kali says the rootless edition needs an unmodified device and leaves the warranty intact.
  • Free storage: The Kali root filesystem and any extra packages take real space, so clear room first (see how to check remaining storage on Android).
  • Backup: Rooting and flashing can wipe the phone, so back up everything first.
  • Supported device for Full: Kali lists kernels for over 110 devices, and the install page says NetHunter supports Android 4.4 through 15.

How to install NetHunter without root

These are the steps from Kali’s rootless page, and they use the NetHunter Store rather than other app sources.

  1. Install the NetHunter Store app from store.nethunter.com.
  2. In the store, install Termux, NetHunter-KeX client and Hacker’s Keyboard.
  3. Open Termux and run termux-setup-storage, then allow storage access.
  4. Run pkg install wget.
  5. Download the installer with wget -O install-nethunter-termux https://offs.ec/2MceZWr.
  6. Run chmod +x install-nethunter-termux, then ./install-nethunter-termux.

The store may keep showing an install button after an app is installed, and Termux may look stuck on its first launch until you press Enter.

Store warning: Kali’s docs say that as of March 31, 2026 the NetHunter Store is outdated and being rebuilt.

If you hit a privileged extension error, the docs suggest unchecking that option in the store’s advanced settings.

How to start NetHunter after installing

CommandWhat it does
nethunter or nhStarts the Kali command line
nethunter -rStarts the command line as root
nethunter <command>Runs one command inside Kali

After the first launch, run sudo apt update && sudo apt full-upgrade -y to bring Kali up to date.

How to get the Kali desktop with KeX

  1. Set a KeX password first with nethunter kex passwd (use nethunter -r kex passwd for the root user).
  2. Start the session with nethunter kex &.
  3. Open the NetHunter-KeX client, enter the password and tap connect.
  4. Set a custom resolution under Advanced Settings in the client if the picture looks off.

To stop a session, run nethunter kex stop, or nethunter -r kex kill to end every KeX session.

What the rootless edition cannot do

  • Metasploit: It runs, but without database support.
  • System utilities: Tools such as top do not run on unrooted phones.
  • Galaxy phones: Non-root users may be blocked from sudo, so use su -c instead.
  • Hardware attacks: Wi-Fi injection, HID and Bluetooth Arsenal need the Full edition.

What to do before installing on a rooted phone

  1. Open Settings > About and tap Build number seven times.
  2. In Developer options, turn on Advanced Reboot and Android Debugging (our Samsung Developer options guide covers where the menu hides).
  3. Unlock the bootloader, then install TWRP recovery and Magisk root, using a guide for your exact model (see rooting versus flashing).

Kali does not give those unlock and root steps because they differ per device, and a wrong step can brick the phone.

On Android 9, 10 or 11 only, flash the Universal DM-Verity and ForceEncrypt Disabler and format the data partition first, or SSH into the Kali rootfs may fail with “Required key not available”.

How to install NetHunter on a rooted phone

Pick the generic ARM64 Full or Minimal installer zip from kali.download/nethunter-images/current/, or a device-specific image if your phone has one, and check its SHA256 sum against the download page.

MethodSteps
Magisk module (recommended by Kali)Install the zip as a module in Magisk, keep the screen awake during install, then reboot
TWRP recoveryCopy the zip to the phone, reboot to recovery, flash it, reboot, then open the NetHunter app to finish setup

On Android 10 or 11, update the NetHunter app from the NetHunter Store after flashing to get around scoped storage limits.

Which phones have official install guides?

Kali publishes device-specific guides for the OnePlus One, OnePlus 5T, OnePlus 7, Samsung Galaxy S10, Xiaomi Mi A2 and Mi A3, among others.

If your model has no ready image, Kali’s docs point to its “Building NetHunter” page, and the Full edition needs a kernel from the device kernels list.

Kali 2026.3, released October 26, 2026, added nine kernels (including Google Pixel on Android 15 and Sony Xperia 10 V) and KernelSU support.

How to fix Termux “Signal 9” killing NetHunter on Android 12 and newer

Android 12 and later can kill background Termux processes, which shows up as a “Signal 9” error.

Android versionFix (community method)
14 and newerSettings > Developer options, turn off the child process restrictions switch, then reboot
12L and 13From a PC with ADB: adb shell "settings put global settings_enable_monitor_phantom_procs false", then reboot

These steps come from a community guide rather than Kali, which warns that disabling phantom process killing may cause a bootloop or background apps losing control, so proceed at your own risk.

Quick troubleshooting table

ProblemTry this
KeX will not connectSet the password with nethunter kex passwd before starting; if you started it in the background, bring it forward with fg <job id>
Store shows install after installingIgnore it, Kali says this is a known quirk
Termux appears stuck installingPress Enter
SSH to rootfs fails on Android 9-11Flash the DM-Verity and ForceEncrypt Disabler and format data
Storage permission denied on Android 10-11Update the NetHunter app from the NetHunter Store

How to back up your Kali setup

Stop all NetHunter sessions, then run tar -cJf kali-arm64.tar.xz kali-arm64 && mv kali-arm64.tar.xz storage/downloads in Termux.

On older phones, replace arm64 with armhf in both names.

Official sources

4 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *