How To Update The BIOS On An HP PC (2026)
To update the BIOS on an HP PC, you download the update for your exact product from HP’s Software and Driver Downloads page and run it in Windows.
HP also describes a USB recovery method for a PC that no longer starts Windows.
The steps below follow HP’s own BIOS update article, and HP says to update only when you have a specific reason.
Quick answer
| Situation | Method |
|---|---|
| Windows starts normally | Download the BIOS update from HP Software & Driver Downloads, then double-click the saved file |
| Windows will not start | Create a recovery USB drive on a second PC, then apply it from the HP PC Hardware Diagnostics UEFI menu |
| No newer version is listed | Your PC does not need a BIOS update |
When HP says to update
HP says to update the BIOS only for a specific reason and that an update is probably unnecessary if the computer works normally.
| Reason HP gives | Example |
|---|---|
| A systematic BIOS bug | A known fault in the current BIOS |
| A CPU upgrade | A new processor that needs a newer BIOS |
| A hardware problem | HP Support or your IT provider recommends troubleshooting with a BIOS update |
If an IT company manages your computer, contact them before you install anything.
Warnings from HP
- Install BIOS updates only from HP, because an incorrect download can stop the computer from starting and may damage memory.
- Close all open applications before you begin.
- Keep the computer on and do not restart or shut it down until the update finishes.
- Temporarily turn off antivirus software during the update, then turn it back on.
- If BitLocker was suspended, resume protection afterward.
HP’s article is written for Windows 10, so on Windows 11 pick your installed operating system on HP’s download page and expect screens to look slightly different.
Check your current BIOS version
- Search for Control Panel and open it.
- Open Administrative Tools.
- Open System Information.
The BIOS version, date and BIOS mode are listed there, and you should note them to compare with what HP offers.
Our guide to checking your BIOS version in Windows 11 shows a faster route with msinfo32.
Find your serial number
HP’s download page can identify your PC automatically, or you can enter the serial number.
| PC type | Where the label is |
|---|---|
| Laptop | The underside or back edges, or inside the removable battery compartment |
| Desktop | The side of the case |
| All-in-One | The back of the display |
| Any PC | Run wmic bios get serialnumber in Command Prompt |
For more ways to find it, see our guide to finding your PC serial number and model.
Method 1: Download and run the update in Windows
- Go to HP Software & Driver Downloads at support.hp.com/us-en/drivers.
- Let HP detect your product, or enter the serial number.
- Select your operating system.
- Open the BIOS section to see the version history and any available updates.
- If a newer compatible version is listed, download it with the HP Download and Install Assistant and save it without running it yet.
- Close all open applications.
- Temporarily turn off antivirus in Windows Security.
- Open the folder where you saved the file and double-click it to start the installation.
- When it finishes, follow the prompts and restart the computer.
- If BitLocker was suspended, search for bitlocker and select Resume Protection.
- Turn your antivirus back on.
If a 251 or CMOS error appears after the restart, HP points to its guidance on the CMOS Checksum Bad error.
Our guide to suspending BitLocker shows how to pause and resume it.
Method 2: USB recovery update when Windows will not start
Prepare the drive on a second computer with internet access.
- Use the same product lookup to find and download the BIOS update.
- When the InstallShield Wizard opens, accept the license terms and continue.
- Choose the option to create a recovery USB flash drive and select your USB drive.
- Wait for the copy to finish, then click Finish.
Then apply it on the original computer.
- Turn on the computer and press Esc about once per second until the Startup Menu opens.
- Press F2 to open the HP PC Hardware Diagnostics UEFI menu.
- Plug in the USB drive.
- Select Firmware Management or BIOS Management, then BIOS Update.
- Select Select BIOS Image to Apply, then the HP_TOOLS-USB drive, then the Hewlett-Packard folder, then BIOS.
- Select CURRENT or NEW, then the update file that matches your System Board ID.
- Select Apply Update Now and enter your administrator password if asked.
After the update
On success, HP says the computer restarts automatically after about 30 seconds to complete the update.
If the update fails, an error message appears and the system may run a BIOS recovery after restarting.
HP says not to restart or turn off the computer yourself if the update has failed.
If you are unsure what to do, contact HP support or your IT provider before going further.
If you cannot reach the startup screens, see how to open BIOS or UEFI in Windows 11.