How To Fix Missing Charging This Device Via USB Message (2026)
If your Android phone is plugged into a computer and the “Charging this device via USB” notification never shows up, you have no obvious way to start a file transfer.
This is usually a cable, a lock-screen or a USB-mode problem, and it is fixable without a reset.
Work through the checks below in order, which should take about 10 minutes.
Quick answer: why the USB notification is missing
| Symptom | Likely cause | Try first |
|---|---|---|
| Phone charges, PC sees nothing | Charge-only cable or dirty port | Use a different data cable |
| No notification at all | Notification hidden, or phone locked | Unlock the phone and pull down the shade |
| Notification opens battery page | Samsung One UI quirk | Tap the notification twice |
| Notification shows, PC still empty | Mode is charging only, or driver problem | Pick File Transfer, then check Device Manager |
| Fails only on a public charger | USB data is blocked by design | Use your own cable and computer |
Why does the notification not appear?
Android shows the notification only when it detects a data-capable connection to a host, so a charge-only cable or a bad port gives you nothing to tap.
Recent Android versions also keep data access closed until the phone is unlocked.
Google’s own transfer instructions begin with unlocking the phone and then tapping the “Charging this device via USB” notification.
Step 1: swap the cable and the port
Google notes that not every USB cable can transfer files, so a charge-only cable is the most common culprit.
- Use the cable that came with the phone, or one clearly sold for data.
- Try another port on the computer and plug in directly, not through a hub.
- Test the same phone on a second computer to rule out the PC.
One Samsung community thread describes a Galaxy A14 that charged on USB-A to USB-C cables but only transferred data over a USB-C to USB-C cable.
Step 2: unlock the phone and open the notification shade
Unlock the screen after plugging in, then drag down from the top edge.
The USB entry can be a quiet notification, so it may sit below others instead of popping up.
If you use Lockdown mode or Advanced Protection on Android 16, the phone blocks USB data until you unlock it and reconnect the cable.
Step 3: choose File transfer
- Tap the “Charging this device via USB” notification.
- Under “Use USB for,” select File transfer.
- Open File Explorer on Windows or the Files app on a Chromebook to see the phone.
On Galaxy phones the entry reads “USB for charging phone,” and Samsung says to tap it a second time to reach the other choices.
Samsung also states that charging only is the default on Galaxy devices from One UI 8.0, so you must switch it on each new connection.
Step 4: set the mode from Settings
If the notification will not show, you can switch modes while the phone is connected.
- Open Settings and tap Connected devices.
- Under Other devices, tap USB.
- Select File transfer.
The menu name differs by maker, and this path does not bring the notification back, but it starts a transfer when the link is already live.
Step 5: set the default USB configuration
Developer options lets you choose what the phone does on every connection.
- Open Settings, tap About phone, then tap Build number seven times.
- Go to Settings, then System, then Developer options.
- Search for Default USB configuration and select File transfer.
If it was already on, switch “Use developer options” off, turn it back on and reconnect.
Step 6: fix the Windows driver
If the phone appears with a yellow warning in Windows, the driver is the problem.
- Press Windows key + X and open Device Manager.
- Expand Portable Devices or Other devices and right-click your phone.
- Choose Update driver, or Uninstall device and restart the PC so Windows reinstalls it.
If that fails, choose Update driver, Browse my computer, Let me pick, and select MTP USB Device.
On Windows N editions, a missing Media Feature Pack under Settings, Apps, Optional features can also block detection.
Step 7: set up a Mac
A Mac cannot read an Android phone over USB by default.
You need Google’s Android File Transfer app from android.com/filetransfer, which then opens when the phone is connected in File transfer mode.
Android Central notes that the app has a roughly 4 GB single-file limit, so large videos need another method.
Step 8: clean the USB-C port
Lint packed into the port can stop the connector from seating fully, which gives you a phone that charges but never shows a data connection.
- Power the phone off.
- Shine a flashlight into the port and look for lint or debris.
- Lift it out gently with a dry plastic toothpick or a soft dry brush, never a metal pin.
- Plug the cable back in and check whether it clicks in firmly.
If the plug still wobbles after cleaning, treat it as a damaged port rather than a software fault.
Step 9: check Pixel USB protection on the lock screen
On Pixel 6 and later, Google’s Advanced Protection can block new USB data connections while the screen is locked.
Google says the USB protection turns on automatically when Device protection is enabled in Advanced Protection settings.
- Unlock the screen first, then plug the cable in.
- If a prompt appears, allow data transfer.
- A connection started while the phone was unlocked stays active after it locks, until you unplug it.
Charging still works on a locked screen, but fast charging may wait until you unlock.
What does the USB prompt look like on each device?
| Device or computer | What you see | Where to change the mode | Note |
|---|---|---|---|
| Pixel and most Android phones | “Charging this device via USB” | Tap it, then “Use USB for” and File Transfer | Unlock first, per Google |
| Galaxy on One UI 8.0 or later | “USB for charging phone” | Tap it twice, then “Transferring files / Android Auto” | Charging only is the default |
| Windows PC | Phone appears in File Explorer | Device Manager if a warning shows | See step 6 |
| Chromebook | Files app opens | Same notification, then File Transfer | Per Google’s guide |
| Mac | Nothing by default | Android File Transfer app | See step 7 |
Google’s guide adds that some of its steps only work on Android 14 and up, so update the phone if a menu is missing.
Which fix matches which situation?
| Situation | Fix | Step |
|---|---|---|
| Nothing on the PC at all | New cable, new port | 1 |
| Notification missing but PC reacts | Unlock, pull down the shade, Settings path | 2 and 4 |
| Mode keeps going back to charging | Default USB configuration | 5 |
| Yellow warning in Device Manager | Reinstall MTP driver | 6 |
| Using a Mac | Android File Transfer | 7 |
| Plug wobbles or charges only at an angle | Clean the port, then consider repair | 8 |
| Pixel works only after unlocking | Unlock before plugging in | 9 |
What to do if nothing works
Update the phone under Settings, System, System update, then restart both devices and try again.
A factory reset is the last resort, so back up first and use it only after a second cable and a second computer both fail.
If the port feels loose or only charges at certain angles, the port itself may be damaged and needs a repair; see our Galaxy S25 USB-C port guide for port-specific checks.
Move files without a cable
Wireless options skip the problem entirely: Microsoft Phone Link, email, or cloud storage.
Our guide to sending large files from Android covers the options, and Smart Switch works for moving to a new Galaxy.
Official references: Google’s Pixel file transfer guide and Samsung’s USB mode guide plus Google’s USB protection page.
+249925969524