How To Fix OontZ Angle Solo Bluetooth Not Connecting Problem

The OontZ Angle Solo Bluetooth not connecting issue can be caused by different factors. The speaker might not be paired, the battery might not be charged, or this could be due to a setting issue. You need to do a series of troubleshooting steps to fix this.

The OontZ Angle Solo is a portable Bluetooth speaker that is small in size yet is capable of delivering a loud sound. You can easily bring this with you on any of your outdoor activities and don’t have to worry about it getting wet thanks to its waterproof design. Some of its features include a built-in microphone for handsfree speakerphone calls and a 10 hour battery play time just to name a few.

Technical specifications of the OontZ Angle Solo:

  • Crystal Clear Distortion-Free Sound
  • Bluetooth 4.2, Play up to 100 feet from your audio device
  • 5 watts of peak output power exceptionally loud volume
  • IPX5 Certified Water Resistant
  • Amazingly light under 8 ounces
  • 3.9 Inches long 2.8 inches high and 2.75 inches wide
  • Connects quickly over Bluetooth to your iPhone, Smartphone, and Tablet

What to do when your OontZ Angle Solo doesn’t connect to a Bluetooth device

An issue that you might encounter with your Angle Solo Bluetooth speaker is when you cannot pair it with another Bluetooth device. This can be an annoying problem especially if you want to play your favorite music on the speaker. Here are the troubleshooting steps you need to do to fix this.

Solution 1: Perform a factory reset on the OontZ Angle Solo

The first troubleshooting step you should do is a factory reset or hard reset. This procedure will wipe out the data on the Bluetooth speaker and bring it back to its default settings. This is a useful troubleshooting step to do when you are experiencing problems with the device.

Time needed: 2 minutes.

Reset the speaker

  1. Remove the Micro USB charging cable if connected.

    This ensures that the device will not be charging.Fix OontZ Angle Solo Bluetooth Not Connecting Problem

  2. Press and hold down the Power Button and + button for a second, then release.

    This will reset the speaker to its default factory settings.What to do when your OontZ Angle Solo doesn't connect to a Bluetooth device

  3. Turn on the device.

    You can do this by pressing on the power button.oontz angle solo turn on

After performing the reset try to check if the Bluetooth issue is fixed.

Solution 2: Pair the Bluetooth device

There’s a possibility that the speaker is currently paired to another device or is not yet paired at all. To fix this you will need to pair the speaker. All you need to do is to press the Bluetooth button for 3 seconds until the blue LED light begins flashing. You can then search for this speaker on your phone then connect to it.

Solution 3: Charge the speaker to fix Bluetooth not connecting issue

If the battery of the speaker does not have any charge left or has a low charge then this can cause the Bluetooth feature not to work at all . If this is the culprit then all you need to do to fix this is to charge the speaker.

  • Pull down the rubber flap to access the charging port.
  • Insert the smaller end of the Micro USB charging cord  into the charging port.
  • Insert the larger end of the Micro USB charging cord to a USB wall charger with an output of at least 1.0A and not greater than 2.4A.

Charge this speaker for at least 4 hours then try checking if you can pair it with your phone.

Solution 4: Device is not in range

The distance between this speaker and device it will be connecting to should not exceed 100 feet. This range will decrease if there are obstructions or signal interferences between both devices.Try placing the speaker and the device it is connecting to closer then check if the problem still occurs.

Having the OontZ Angle Solo Bluetooth not connecting issue can be a frustrating experience. Hopefully, this solution will help you fix the problem.

Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.

Also Read: