How To Fix Anker SoundCore Does Not Charge Problem

The Anker SoundCore does not charge issue that you are experiencing can be caused by several factors. It could be due to speaker settings, bad charging port, faulty charging cable, or a faulty charger. To fix this you will need to perform a series of troubleshooting steps.

The Anker SoundCore is a popular Bluetooth speaker that has a great sound quality and a long playback time. Some of its features include a 24 hour playback time on a single charge, IPX5 water protection, and a durable build quality just to name a few.

Technical Specifications of the Anker SoundCore:

  • Bluetooth Version: 4.0
  • Driver output: 3W×2
  • Playtime: Estimated 24+hrs @80% volume
  • Battery Capacity: 4400mAh
  • Input: 5V / 1A
  • Charging time: 5 hours
  • Bass Boost: Passive radiator
  • Handsfree function: Y
  • Volume/Track control: Y
  • Range: 20m/66ft
  • Weight: 365g/12.9oz
  • Size: 165x45x54mm

What to do when your Anker SoundCore will not charge

One issue that you might encounter with your SoundCore Bluetooth speaker is when you can’t seem to charge it. This can be an annoying issue especially if the speaker is running low on power as you won’t be able to use it. Here are the troubleshooting steps you need to do to fix the problem.

Method 1: Perform a factory reset on the Anker SoundCore

A factory reset or hard reset is a procedure that wipes out the data on the speaker and brings it back to its default settings. This is a useful troubleshooting step to perform whenever you are experiencing problems with the device such as when you can’t make a Bluetooth connection or when it doesn’t charge.

Time needed: 2 minutes.

Reset speaker

  1. Press and hold the Power button.

    Do this for at least 8 seconds to reset the device.Fix Anker SoundCore Does Not Charge Problem

  2. Press and hold the Bluetooth button.

    Do this for at least 2 seconds to delete all previous pairings.What to do when your Anker SoundCore won't charge

After performing these steps try checking if you can charge the SoundCore speaker.

Method 2: Dirt present in the charging port

When you use this speaker outdoors there’s a chance that dirt or debris will get stuck on the charging port. The presence of debris on the charging port will prevent the speaker from being charged. Check the charging port for any signs of dirt or debris then clean this off using a toothpick or simply by blowing to it until it gets removed. Once done, check if you are able to charge the device.

Method 3: Try using a different charging cable to fix does not charge problem

One of the common factors that can cause this problem is a defective micro USB charging cord. This cord can get damaged easily especially if it is constantly bent or pulled. Try using a different cord to charge the speaker. If the device charges then you will need to get a new cable for your Bluetooth speaker.

Method 4: Try using a different power adapter on the to fix Anker SoundCore not charging issue

There’s a possibility that you might be using a defective wall charger to charge the speaker. Some of the reasons why a charger won’t work is if its port is damaged or if it has a faulty internal board. Try using a different wall charger then check if the issue still occurs. You can try using the charger of your Android phone.

Method 5: Defective battery

If the battery of this speaker does not work anymore then you won’t be able to charge it. If this is the cause of the problem then replacing the battery will fix this. It’s recommended that you have this done at a service center.

You might be wondering why the battery gets defective. Some reasons behind this include repeated overcharging of the battery or constant exposure to heat such as when you leave the speaker under the sun.

Method 6: Defective circuit board

A defective circuit board will prevent this speaker from being charged. This usually happens if water gets inside the speaker and causes some of its components to get damaged. If this is what’s causing the problem then you will need to have this fixed at a service center.

Having the Anker SoundCore does not charge issue can be a frustrating experience. Hopefully, this solution will help you fix the problem.

Visit our TheDroidGuy Youtube Channel for more troubleshooting videos.

Also Read:

Leave a Reply

Your email address will not be published. Required fields are marked *