How To Fix A Device Not Showing Up In Logitech G HUB (2026)
When a Logitech mouse, keyboard, headset or webcam is plugged in but never shows up in G HUB, the cause can be as simple as a loose cable or as deep as a corrupted settings file.
Logitech lists its fixes from simplest to most involved, and the steps below follow that order.
Everything here comes from Logitech’s own support pages.
Quick answer: work down this list
| Step | What to do |
|---|---|
| 1 | Update G HUB to the newest version |
| 2 | Check cables, connectors and power |
| 3 | Unplug the device or receiver, wait about 10 seconds and plug it in again |
| 4 | Try another USB port, then another computer |
| 5 | Reinstall the device driver in Device Manager (Windows) |
| 6 | Reset G HUB by deleting settings.db |
Start with the basic checks
Logitech’s general troubleshooting has seven items, and the first four fix most missing-device cases.
- Use the latest G HUB, because newer releases add support for new devices and an old version may not detect them.
- Check that cables, connectors and power sources are firmly connected.
- Disconnect the USB receiver, wait about 10 seconds and reconnect it.
- Try a different USB port, or connect directly to the computer, since the current port may be faulty.
- Test the device on another computer to see whether the problem is the device or your PC.
- Make sure the device has enough power and check its indicator lights.
- Check that your operating system, G HUB and the device firmware are all up to date.
Why a device goes missing
| Possible cause | How Logitech’s steps address it |
|---|---|
| G HUB is too old for the device | Update to the newest version and read the release notes |
| Bad port, cable or power | Replug, change ports, test another computer |
| Faulty driver entry in Windows | Remove the device and its driver in Device Manager |
| Damaged G HUB settings | Reset settings.db |
Windows: reinstall the device driver in Device Manager
If the basics fail, Logitech has you remove the device’s driver so Windows and G HUB set it up again.
- Open Device Manager by pressing Win + Pause/Break.
- Select View and choose Devices by container.
- Find your device and expand it, looking for a name such as Logitech G560 Gaming Speaker.
- Right-click the device and choose Uninstall Device.
- Tick Delete the driver software for this device and click Uninstall.
- Unplug the device and plug it into a different USB port so it is detected again.
Logitech says G HUB should then download the driver for the device.
Windows: reset G HUB to default settings
If the device is still missing, Logitech’s next step is a reset that deletes a single file, so back it up first.
- Right-click the G HUB tray icon and choose Quit.
- Open C:\Users\[USERNAME]\AppData\Local\LGHUB, replacing [USERNAME] with your account name.
- Copy settings.db to a safe place such as the Desktop.
- Delete settings.db from the LGHUB folder.
- Run G HUB, which returns to default settings and creates a new settings.db.
To bring your old settings back, quit G HUB, copy your backed-up settings.db into the same folder and run G HUB again.
Mac: reinstall G HUB and reset its settings
Logitech’s Mac article for a missing device starts with a full reinstall.
That means force quitting G HUB, moving it to the Trash from Applications, restarting and installing it again, and our guide to uninstalling and reinstalling Logitech G HUB walks through it.
After the new install, macOS should show System Extension Blocked messages, and Logitech says to open System Settings, go to Privacy & Security and allow Logitech G HUB each time.
If the device is still missing, Logitech’s Mac reset works like the Windows one.
- Quit G HUB from its menu bar icon.
- In Finder choose Go > Go to Folder and enter ~/Library/Application Support/LGHUB.
- Copy settings.db somewhere easy to find, then delete it from the LGHUB folder.
- Launch G HUB, which resets to defaults and creates a new settings.db.
To restore your settings, quit G HUB, copy the backup into the same folder and launch it again.
| System | Where settings.db lives |
|---|---|
| Windows | C:\Users\[USERNAME]\AppData\Local\LGHUB |
| Mac | ~/Library/Application Support/LGHUB |
Wireless device lost its LIGHTSPEED receiver after an update
Logitech has a separate article for a device that loses its connection to its LIGHTSPEED receiver after a G HUB update.
It says this usually happens because only one of the two, the device or the receiver, got its firmware update.
You need the device’s charging cable, the LIGHTSPEED receiver, a computer with free USB ports and G HUB installed.
- Connect the device to its charging cable and a USB port so its firmware can update.
- Open G HUB, and if a firmware update banner appears click Install and follow the prompts.
- With G HUB open, unplug the receiver and plug it into a different USB port, following any prompts.
- Click the gear icon to open G HUB Settings.
- Click Device Pairing Tool.
- Choose the mouse or keyboard to pair, confirm the tool detects the receiver and follow the on-screen instructions.
- If that fails, unplug and replug the receiver and repeat.
If you use the receiver with an adapter, Logitech says to take the receiver off the adapter, plug it straight into a USB port and connect the USB cable to the mouse or keyboard.
If G HUB says Updating LIGHTSPEED Receiver
A different message, Updating LIGHTSPEED Receiver. Please keep it plugged in, can also appear after a receiver update.
Logitech treats it as stuck once it has shown for more than three minutes, and the fix is to unplug and replug the receiver and then use the Device Pairing Tool as above.
Prevent it next time
Logitech says to keep the receiver plugged in and the device connected by its charging cable during G HUB firmware updates.
G HUB normally updates both firmware versions together, and if only one updates it should prompt you to update the other once both are connected.
Related guides
If G HUB itself will not load, see our G HUB stuck on the loading screen guide.
For other Logitech software, read Logi Options+ not detecting your device.
If the port is the problem, try USB ports not working in Windows 11.