How To Set Up Galaxy Watch Fall Detection And SOS (2026)
Galaxy Watch fall detection is switched off when the watch is new, so it will not alert anyone until you turn it on.
Samsung’s support pages also say the feature needs an emergency contact, a connected phone and up-to-date software before it works.
This guide walks through each requirement so a fall alert actually reaches the people you choose.
Quick answer: what must be in place
| Requirement | What Samsung says |
|---|---|
| Watch model | Galaxy Watch Active2, Galaxy Watch3 and all Wear OS models include hard fall detection |
| Software | The watch must run the latest software version |
| Where to turn it on | Only in the Galaxy Wearable app, with the watch connected to the phone |
| Emergency contact | Add at least one first, or the feature will not work |
| Default state | Off until you enable it |
Update the watch software first
Samsung lists the latest software as a condition for fall detection on the watch.
Open Settings on the watch, tap Software update, then tap Download and install if an update is waiting.
Our Galaxy Watch update guide covers what to do when the update fails.
Turn on hard fall detection
- Connect the watch to your phone and open the Galaxy Wearable app.
- Tap Watch settings, or Band settings on a band.
- Tap Safety and emergency.
- Turn on the Hard fall detection switch.
- Tap Hard fall detection to choose what happens after a fall.
If the switch refuses to turn on, check that you have added an emergency contact, because Samsung says the feature does not work without one.
Add emergency contacts and medical info
The same Safety and emergency screen holds the contact list that receives your alert.
| Setting | What it holds |
|---|---|
| Medical info | Conditions, allergies, medications, blood type and notes |
| Emergency contacts | The people contacted when emergency sharing starts |
| Emergency SOS | Options vary by model and include a countdown, the number to contact and a warning sound |
| Hard fall detection | Automatic alerts after a hard fall, plus when to detect, the emergency number and contact sharing |
On the watch itself, press and hold the Home (Power) button and tap Medical info under Emergency info to see what you saved.
Choose when falls are detected
On the Wear OS watch pages Samsung describes a When to detect falls option inside Hard fall detection.
| Option | Meaning |
|---|---|
| Always | Detection stays on all day |
| During physical activity | Detection runs while the watch senses activity |
| Only during workouts | Detection runs only during a tracked workout |
Samsung warns that high-impact activities such as sports can sometimes register as a fall.
If sports trigger false alerts, the narrower options above limit detection to activity or workouts, though Samsung does not list a specific fix for false alarms.
Share your location after a fall
Inside Hard fall detection you can turn on the switch for sharing information with emergency contacts.
With it on, the watch automatically texts your location to them after a fall.
You can also pick an emergency call option so a number is called as well.
What happens after a hard fall
When the watch detects a hard fall it sends an SOS alert, and your emergency contacts are notified right away.
Samsung Canada’s fall page adds that the watch first alerts you for 60 seconds with a popup, sound and vibration.
During that window you can cancel, or swipe to send the SOS immediately, and if you do nothing the messages go out.
That page also says the watch cannot detect all falls, so treat the feature as a backup, not a guarantee.
Trigger or cancel SOS by hand
Fall detection is one part of the emergency tools, and Samsung’s emergency page covers the manual SOS too.
| Model group | How to start SOS |
|---|---|
| Galaxy Watch4 and older | Press the Home (Power) button three times, and Watch4 also allows four presses |
| Older models setup | Settings, then Advanced, then SOS, then turn on the Home key switch and add contacts |
| Newer Wear OS models | Set up under Watch settings, then Safety and emergency in Galaxy Wearable |
Samsung notes that its SOS policy applies to both Galaxy watches and Galaxy phones.
To cancel, look for the red siren icon on the Home screen and swipe left to open notifications.
Tap the SOS notification, tap Stop sharing, then tap the checkmark, and on some models you swipe up on the notification instead.
What contacts receive and for how long
Contacts get a message with your current location and how to track you.
Contacts you assigned for SOS calls are called automatically by the watch and the connected phone.
After an SOS starts, Samsung says the watch sends alerts and location updates every 30 minutes for 24 hours.
If the watch says Emergency calls only
Samsung says that message means LTE is not activated on the watch.
You must activate LTE to send SOS requests without a connected phone, so a non-LTE watch away from its phone cannot send an alert.
Models and features that do not support it
Samsung’s page says Galaxy Fit and Fit2 do not support SOS requests, so those bands cannot send a fall alert.
Medical info is also unavailable on Galaxy Fit, Fit2, Gear Fit2, Gear Fit2 Pro and Galaxy Watch3.
Samsung adds that screens and settings vary by provider, phone and watch, so your menu names may differ slightly.
Samsung states that watch and Samsung Health information is not meant to diagnose, treat or prevent any condition.
When to contact Samsung
If the switch, contacts and software are all correct and the alert still does not send, contact Samsung Support by online chat or the Samsung Members app.
Related reading: Galaxy Watch calls not working and using a Galaxy Watch without a phone.
Sources: Samsung US pages on fall detection and emergency situations, and Samsung Canada’s fall detection page.