|

How To Fix Galaxy Watch Calls Not Working (2026)

When a Galaxy Watch cannot make or receive calls, the cause is usually the link to the phone, a silent mode or a missing call setting.

Samsung’s support pages explain each of these and what a Bluetooth watch needs compared with an LTE watch.

This guide goes through them in a practical order.

Quick answer: what each watch needs

Watch typeWhat it needs to take calls
Bluetooth-only watchA Bluetooth connection to the phone through Galaxy Wearable
LTE watchActive carrier service, and it can call without the phone nearby
Watch connected remotely over Wi-FiIncoming calls may not arrive
Several Galaxy watchesOnly the one currently connected can call

Which watches can call without a phone

Samsung’s Wear OS setup page names the LTE models as the Galaxy Watch Ultra, Watch7, Watch6 and Watch6 Classic.

WatchPhone requirement per Samsung
Watch6 and Watch6 Classic LTECan be set up without a phone
Galaxy Watch4 and Watch5Cannot be used standalone or with an iPhone, so they need a compatible Android phone through Galaxy Wearable
Any watch without active LTE serviceNeeds a Bluetooth or Wi-Fi link to the phone for calls and texts

Check the Bluetooth connection first

Samsung says a Bluetooth watch must be connected to the phone through Bluetooth and the Galaxy Wearable app.

If the watch is connected remotely over Wi-Fi, incoming calls will not arrive.

If you own more than one Galaxy watch, use Galaxy Wearable to connect the one you want to call from.

Connection trouble is covered in our Galaxy Watch not connecting guide.

Turn on the Calls switch for the watch

Samsung says that if you cannot make or answer calls on the watch, you should enable its calling option on the phone.

  1. On the phone, open Settings > Connections > Bluetooth.
  2. Tap the settings icon beside the paired watch.
  3. Turn on the Calls switch.

Turn off silent modes

Samsung says Do not Disturb, Goodnight mode and Theater mode can stop the screen waking for a call.

Switch each one off in Settings > Advanced on the watch.

If a call arrives while one is on, press a key, rotate the bezel or raise your wrist to see it.

Check call notifications on the phone

On the phone, open Galaxy Wearable > Watch settings > Notifications > App notifications.

Make sure the Incoming call, Missed call and Messages switches are on.

If other alerts are also missing, see our Galaxy Watch notifications guide.

Check call barring and the carrier

Samsung’s third check is that the caller is not blocked by call barring on the phone or the watch.

It also lists items to ask the carrier to verify.

  • Call barring and call forwarding are off on the phone and watch.
  • The phone is active, with its IMEI and serial number if it was repaired.
  • The account and device are eligible and active, since devices not meant for your region may not activate.
  • Coverage, roaming and data limits are adequate.
  • APN settings are correct.

Check an LTE watch’s mobile network

Samsung lists several checks for LTE models.

CheckDetail
Repaired watchContact the carrier with the IMEI and EID or ICCID to reactivate service
Bought second-handThe eSIM may be tied to another account, so contact the carrier or seller
Airplane mode and data limitTurn both off, because a reached limit shuts off mobile data
CoverageMobile network problems occur outside wireless coverage

On the watch, open Settings > Connections > Mobile networks, set the data connection to Auto switch or Always on, and turn on Mobile data.

Turn on Data roaming only if you are outside coverage, since charges may apply.

Try a different band on a Watch4

Samsung notes that a metal band on a Galaxy Watch4 can interfere with the antennas and intermittently drop calls.

Swap to a different band if calls cut out only with the metal one.

Make and answer calls correctly

  1. On the watch, open the Phone app.
  2. Tap the Keypad icon to dial, or the Contacts icon to pick a contact.
  3. Tap the green phone icon.

On a Bluetooth watch, the paired phone places the call and the watch works as a speakerphone unless a headset is in use.

Samsung also says you can pair Bluetooth headphones to take calls.

On an LTE watch, tap the phone or watch icon above the green icon to choose which device places the call.

To answer when away from your phone, swipe the green phone icon right, or swipe the red icon left to decline.

To move a call to the phone on a Wear OS Galaxy watch, tap More options, then Switch to phone.

If a second call arrives during a call, swipe the green icon and choose Hold current call or End current call.

To return to a held call, tap More options and then Swap.

Remote calling over Wi-Fi has limits

Samsung’s page says Call & text on other devices applies to Wear OS watches.

It does not work with Verizon or AT&T phones, or with an LTE watch that has active mobile service.

Call forwarding is not available, and incoming calls may not arrive while connected remotely.

Reset the watch if the problem persists

Unpair the watch on the phone under Settings > Connections > Bluetooth, then on the watch go to Settings > General > Reset > Reset.

Back up first. Back up with Galaxy Wearable before resetting, and note that an LTE watch set up by QR code needs a new QR code from the carrier.

Reconnect the watch in Galaxy Wearable afterwards and check for software updates, and see our Galaxy Watch 7 reset guide for a walkthrough.

If the problem persists, Samsung says to request service through the Samsung Support Center.

Official sources

Leave a Reply

Your email address will not be published. Required fields are marked *