How To Find Your IP And MAC Address In Windows 11 (2026)
Windows 11 shows your IP address in Settings and your MAC address in Command Prompt.
The IP address takes four clicks, and the MAC address takes one short command.
This guide covers both, plus what to do when your PC lists more than one address.
Quick answer: where to find each address
| What you want | Where to look |
|---|---|
| IP address (IPv4) | Settings > Network & internet > Wi-Fi or Ethernet, then your connection |
| IP address, subnet mask, gateway | Command Prompt: ipconfig |
| MAC address (Physical Address) | Command Prompt: getmac /v |
| MAC address and full network details | Command Prompt: ipconfig /all |
| MAC address with the PC off or not booting | BIOS or UEFI System Information on some Dell laptops |
The IP steps come from Microsoft, and the MAC steps come from Dell and ASUS support pages.
Find your IP address in Settings
- Select Start > Settings > Network & internet.
- Select Wi-Fi and then the network you are connected to, or select Ethernet.
- Look for the address next to IPv4 address.
Microsoft says you can also right-click the Network or Wi-Fi icon on the taskbar and select Network and internet settings.
A shortcut is the Properties (info) icon near your connected network.
Pick the right connection
| Your PC is connected by | Open this in Network & internet |
|---|---|
| Wi-Fi | Wi-Fi, then the network you are connected to |
| Network cable | Ethernet |
Microsoft’s page names only the IPv4 address field, so use the ipconfig method below if you need more.
Find your IP address with ipconfig
- Select Start, type cmd and open Command Prompt.
- Type the command below and press Enter.
ipconfig
Microsoft says that run without parameters, the command shows the IPv4 and IPv6 addresses, subnet mask and default gateway for every adapter.
Find the section for your Wi-Fi or Ethernet adapter and read the address there.
What the ipconfig switches do
| Command | What it does, per Microsoft |
|---|---|
| ipconfig /all | Shows the full TCP/IP configuration for all adapters |
| ipconfig /renew | Renews the DHCP configuration for adapters set to get an address automatically |
| ipconfig /release | Releases the current DHCP configuration and discards the IP address |
| ipconfig /flushdns | Flushes and resets the DNS client resolver cache |
Microsoft warns that /release disables TCP/IP on adapters that get their address automatically, so only use it when you mean to.
More ipconfig details from Microsoft
Microsoft says ipconfig is most useful on computers that get their address automatically, because it shows which values came from DHCP, from Automatic Private IP Addressing (APIPA), or from an alternate configuration.
| Command | What it does, per Microsoft |
|---|---|
| ipconfig /displaydns | Shows the DNS resolver cache, including entries from the Hosts file and recently resolved records |
| ipconfig /registerdns | Manually re-registers the computer’s DNS names and IP addresses |
| ipconfig /renew6 and /release6 | Renew or release the DHCPv6 configuration, the IPv6 counterparts of /renew and /release |
If an adapter name contains spaces, Microsoft says to put it in quotation marks, such as “Local Area Connection”.
The page also says adapter names accept the * wildcard, so a name like Local* matches every adapter that begins with Local.
Those switches are for troubleshooting, and you do not need any of them just to read an address.
Find your MAC address with getmac
- Open Command Prompt as administrator.
- Type the command below and press Enter.
- Find the entry labeled Physical Address.
getmac /v
Dell’s support page names this as the way to read the MAC address of a network adapter in Windows.
Type exit and press Enter when you are done.
Find your MAC address with ipconfig /all
Dell says ipconfig /all also shows each adapter’s MAC address, along with a lot of other network information.
ASUS says to look under the Ethernet adapter section for a wired connection, or the Wi-Fi adapter section for wireless.
The value you want is the line named Physical address.
Find your MAC address in Settings
ASUS lists a Settings method for Windows 11 and 10 users.
- Open Settings.
- Select Network & Internet.
- Select View your network properties.
- Read Physical address (MAC) in the Ethernet or Wi-Fi section.
ASUS notes that screenshots and steps may differ between software versions, so use getmac if you do not see that link.
What a MAC address looks like
| Detail | What Dell and ASUS say |
|---|---|
| Size | A 48-bit identifier, written as 12 hexadecimal characters |
| Dell format | xx-xx-xx-xx-xx-xx, with hyphens between pairs |
| ASUS format | xx:xx:xx:xx:xx:xx, with colons between pairs |
Both forms describe the same address, so copy it the way the site or router you are entering it into expects.
Why your PC has more than one MAC address
Dell says each network adapter has its own MAC address, so a PC with wired and wireless adapters lists several.
Write down the address for the adapter you actually use, such as Wi-Fi.
Dell also says the address belongs to the physical adapter and changes if the adapter is replaced.
If the Wi-Fi address looks different
Microsoft says Windows can use random hardware addresses for Wi-Fi if your Wi-Fi hardware supports it.
The setting is under Settings > Network & internet > Wi-Fi, and it can apply to all networks or to one network from Manage known networks.
Microsoft says random addresses are used for scanning and for connecting, so the address on a network that uses the setting may not match your adapter’s own.
If you use a Dell dock
Dell describes a feature called MAC Address Pass-Through, where the laptop’s own address replaces the dock’s address when it connects to the network.
With the dock attached, Dell says to run getmac or ipconfig.
Without the dock, restart and press F2 or F12 at the Dell splash screen, then check System Information in the BIOS.
Related Windows 11 guides
- How to check your PC specs in Windows 11
- How to find your saved Wi-Fi password
- How to find your PC serial number
- How to reset network settings in Windows 11