|

How To Check Your PC Specs (RAM, CPU) In Windows 11 (2026)

You can see your PC’s processor and RAM in the Windows 11 Settings app in a few clicks.

Open Settings, go to System, and select About.

This guide also shows where to find core counts, RAM speed, graphics card and free storage.

Quick answer: where each spec lives

What you wantWhere to look
Processor and installed RAMSettings > System > About > Device specifications
32-bit or 64-bitSettings > System > About > Device specifications
Cores and logical processorsTask Manager > Performance > CPU
RAM speed, slots used, form factorTask Manager > Performance > Memory
Graphics cardSettings > System > Display > Advanced display, or Task Manager > Performance > GPU
Free storageSettings > System > Storage

The About and Storage paths come from Microsoft’s page on finding information about your Windows device.

See the processor and RAM in Settings

  1. Right-click Start and choose Settings.
  2. Select System, then About.
  3. Look under Device specifications.

Microsoft says that section lists the processor type, the amount of RAM installed, and whether Windows is 32-bit or 64-bit.

The device name appears at the top of the page, with the model name just below it.

You can also press Windows + I to open Settings faster.

Check the Windows edition and version

The Windows specifications section on the same About page shows which edition and version your device is running.

For a fuller walk-through of that section, see our guide to checking which Windows version you have.

Find the number of cores

  1. Press Ctrl + Shift + Esc, or right-click Start and select Task Manager.
  2. Select Performance in the left pane.
  3. Select CPU.

Microsoft says the counts appear next to the labels Cores and Logical processors.

If you do not see the Performance tab, select the menu (hamburger) icon in the upper-left corner of Task Manager, as How-To Geek notes.

Check RAM speed and slots

  1. Open Task Manager and select Performance.
  2. Select Memory.
  3. Read the total capacity in the upper-right corner.

How-To Geek says the Speed, Slots used and Form factor entries appear in a short list toward the bottom of that view.

It also says Task Manager does not show the RAM type, such as DDR4 or DDR5.

See how many RAM slots are free

Windows Central says the Slots used entry in Task Manager shows how many memory slots are in use and how many there are in total.

  1. Open Task Manager, then select Performance and Memory.
  2. Check the slots entry in the bottom-right area.

For a command-line count, Windows Central suggests running the commands below in an administrator window.

CommandWhat it shows
wmic Memphysical get MaxCapacity, MemoryDevicesThe total number of slots on the motherboard (the MemoryDevices value).
wmic MemoryChip get BankLabel, DeviceLocator, CapacityEach installed memory stick, so you can count the slots in use.

Subtract the sticks you count from the total to see how many slots are empty.

Find out if your RAM is DDR4 or DDR5

How-To Geek describes a PowerShell command for this.

  1. Open PowerShell or Terminal.
  2. Run the command below.
  3. Read the MemoryType number in the results.
Get-CimInstance win32_physicalmemory
MemoryType numberRAM type
25DDR3
26DDR4
27DDR5

If it returns 0, which means unknown, How-To Geek suggests looking up the memory part number instead.

See which graphics card you have

MethodSteps
SettingsSettings > System > Display, then under Related settings select Advanced display, and read Display information.
Task ManagerPerformance > GPU shows the manufacturer and model, plus memory and usage.
dxdiagSearch for dxdiag, open it, select the Display tab, and look under Device.

Those three methods come from Windows Central’s graphics card guide.

Open System Information for the full list

Microsoft describes System Information as a utility that gives a comprehensive view of the hardware, system components and software environment on your device.

  1. Search for System Information in the Start menu, or press Windows + R, type msinfo32, and press Enter.
  2. To get accurate reporting of drivers and services, right-click it and select Run as administrator.

Microsoft notes that the tool does not provide hardware information in Safe Mode.

Save a specs report to a file

Microsoft documents two command-line options for System Information, which you can run from an elevated Command Prompt.

OptionWhat it saves
msinfo32 /report C:\TEMP\TEST.TXTA text file; the name is saved exactly as typed, so include .txt.
msinfo32 /nfo C:\TEMP\TEST.NFOAn .nfo file; the extension is added if you leave it off.

The C:\TEMP\TEST names are Microsoft’s examples, so replace them with your own folder and file name.

Tell integrated graphics from a separate graphics card

  1. Search for Device Manager and open it.
  2. Expand Display adapters.
  3. Count the adapters and note each manufacturer.

Pureinfotech says two or more adapters mean the PC has both integrated and discrete graphics, with the second adapter being the dedicated one.

It adds that a single Intel HD Graphics or AMD Radeon Graphics entry points to integrated graphics only, and that you should search the exact adapter name online to confirm for AMD.

Check how much storage is free

  1. Right-click Start and choose Settings.
  2. Select System, then Storage.
  3. With more than one drive, select Advanced storage settings and then Storage used on other drives.

Microsoft lists those steps for seeing available space on all drives.

If space is low, follow our guide to freeing up disk space on Windows 11.

Which method to use

If you needUse
A quick answer for a store, app or game requirementSettings > System > About
Core countTask Manager > CPU
RAM speed or free slotsTask Manager > Memory
DDR generationPowerShell command above
Graphics card modelAdvanced display or Task Manager > GPU

Sources

Leave a Reply

Your email address will not be published. Required fields are marked *