Epson Scan To Folder Error: DNS Or Authentication (2026)
If an Epson printer says “DNS error. Check DNS settings” or “Authentication error” when you scan to a shared folder, the scan reached the network but could not be saved to the folder.
Epson lists five messages for this kind of scan, and each one has its own fix on its status message pages.
This guide follows those pages and shows what to check for each message.
Quick answer: which message do you have?
| Message on the printer screen | What Epson says to do |
|---|---|
| DNS error. Check DNS settings. | Check the destination computer, firewall, network type, folder path and IP address |
| Authentication error. Check the authentication method, authenticated account, and authenticated password. | Make sure the user name and password match your contacts list entry and the password has not expired |
| Communication error. Check the Wi-Fi/network connection. | Check the folder path, the folder’s access rights, and Microsoft network sharing in Web Config |
| The file name is already in use. Rename the file and scan again. | Rename the scan, or move or delete the existing file |
| Scanned file(s) are too large. Only XX pages have been sent. | Free up space on the destination computer and try again |
These messages appear when you scan from the printer’s control panel to a shared folder on a computer, and they are listed on Epson’s status message pages for the WF-7820 and WF-3720 / WF-4730 lines.
Fix “DNS error. Check DNS settings.”
Epson describes this as a network communication error that happened during scanning.
Work through these checks in order and retry the scan after each one.
- Make sure the destination computer is on and not in sleep mode.
- Temporarily turn off the computer’s firewall and security software, then retry the scan.
- If the scan works with the firewall off, review your security software settings rather than leaving it off.
- Make sure the computer’s network type is not set to Public.
- Make sure the shared folder path matches the path stored in the printer’s contacts list.
- Confirm the computer’s IP address; if it uses DHCP, renew the address.
- If the computer uses a static IP address, replace the computer name in the folder path with the IP address.
- Confirm the DNS settings, and make sure the computer name and IP address match in the DNS server table.
Epson’s last step says to contact your network administrator if the DNS problem continues.
Fix “Authentication error”
Epson lists this message for scans sent to a shared folder, and it points at the account details the printer is using.
Epson’s fix is to compare the computer’s login with the contacts list entry for the folder.
| Check | What to confirm |
|---|---|
| User name | Matches the computer’s user name in the contacts list entry |
| Password | Matches the computer’s password in the contacts list entry |
| Expiry | The computer account’s password has not expired |
Fix “Communication error. Check the Wi-Fi/network connection.”
For scanning to a shared folder, Epson describes this as a wireless communication error during the scan.
- Make sure the shared folder path matches the contacts list entry.
- Make sure access rights were enabled in the folder’s Properties when you created the shared folder.
- On Windows, open Web Config and turn on the Use Microsoft network sharing setting under Network > MS Network.
Epson’s XP-970 page lists a different message with similar wording, “Communication error. Check if the computer is connected,” which is about scanning to a computer and not to a shared folder.
For that case, see our Epson scan to computer guide.
Fix “The file name is already in use”
A file with the same name already exists in the shared folder.
Epson’s fix is to rename your scan, or to move or delete the file that is already there, and then scan again.
Fix “Scanned file(s) are too large”
The full message reads “Scanned file(s) are too large. Only XX pages have been sent. Check if the Location has enough space.”
Epson says the destination computer does not have enough free storage, so free up space and try again.
Only the number of pages shown in the message reached the folder, so scan the remaining pages once there is room.
Which check applies to which message
| Check | DNS | Authentication | Communication |
|---|---|---|---|
| Computer on and not asleep | Yes | – | – |
| Firewall and security software | Yes | – | – |
| Network type not Public | Yes | – | – |
| Folder path matches contacts list | Yes | – | Yes |
| IP address or DNS table | Yes | – | – |
| User name and password | – | Yes | – |
| Folder access rights | – | – | Yes |
| Microsoft network sharing in Web Config | – | – | Yes |
This table only restates which of Epson’s steps appear under each message.
Other messages on the same Epson pages
The same status message pages list a message that the printer needs a computer connection, a driver or port check, and a firmware message.
A “Recovery mode” message means a failed firmware update, which our Epson Recovery Mode guide covers.
A general “Printer error” message that asks you to turn the power off and on is covered in our Epson printer error guide.
If the printer does not show up on the network at all, our Epson printer offline guide is the better starting point.
When to contact Epson
Epson’s pages stop at the checks above, so if a message returns after you have worked through them, contact Epson support.
Have your printer model, the exact message and the folder path you entered ready.