|

Fix Elgato Capture Card Or Cam Link Not Working In Windows (2026)

An Elgato capture card, Cam Link or Facecam can fail to show video or audio in Windows because the Windows privacy settings block it.

Elgato has a support article for exactly this, and the fix takes about a minute.

The steps below follow that article and Microsoft’s own camera and microphone privacy pages.

Quick answer: turn on camera and microphone access

Elgato says the Windows 10 April 2018 Update (version 1803) added privacy settings that may interfere with its capture cards and cameras.

SettingWhere to find itWhat to do
Camera accessSettings > Privacy & security > CameraTurn on
Let apps access your cameraSame pageTurn on
Let desktop apps access your cameraSame pageTurn on (Windows 11)
Microphone accessSettings > Privacy & security > MicrophoneTurn on
Let apps access your microphoneSame pageTurn on

Which Elgato products are covered

Elgato lists these products as affected by the privacy settings.

FamilyModels listed by Elgato
Cam LinkCam Link, Cam Link 4K
FacecamFacecam, Facecam MK.2, Facecam Neo, Facecam Pro
HD capture cardsGame Capture HD60 S, HD60 S+, HD60 Pro, HD60 X, Neo
4K capture cardsGame Capture 4K S, 4K Pro, 4K X, 4K60 Pro, 4K60 Pro MK.2

If your device is not on the list, the same Windows settings can still block a camera, so the steps are harmless to check.

Turn on camera access in Windows

Start with the camera setting, since it controls the video from the device.

  1. Search Windows for “camera privacy” and open the result.
  2. Under App permissions in the left sidebar, select Camera.
  3. Turn on “Allow apps to access your camera” (shown as Camera access and Let apps access your camera on Windows 11).
  4. On Windows 11, also turn on the setting that lets desktop apps access your camera.

Microsoft’s page gives the Windows 11 path as Start > Settings > Privacy & security > Camera.

Why the desktop apps setting matters

Microsoft explains that Let desktop apps access your camera enables camera access for all desktop apps at once.

You cannot set it per desktop app.

Browsers such as Microsoft Edge and video conferencing apps such as Microsoft Teams are desktop apps that need this turned on.

If your capture software is not listed under the Store apps, it is treated as a desktop app.

Microsoft says Let apps access your camera, by contrast, controls Microsoft Store apps.

Turn on microphone access in Windows

Capture cards and cameras with audio need the microphone setting as well.

  1. Search Windows for “microphone privacy” and open the result.
  2. Under App permissions in the left sidebar, select Microphone.
  3. Turn on “Allow apps to access your microphone”.

Microsoft’s page adds that desktop apps are controlled by Let desktop apps access your microphone on the same page.

If you only fix the camera, you may get video but no sound.

Check the toggle for each Microsoft Store app

Microsoft says that when Let apps access your camera is on, you can switch camera access on or off for each listed Microsoft Store app.

Make sure the app you are using is switched on in that list.

If the app is not listed, Microsoft says it may be a desktop app, which follows the desktop apps switch instead.

If camera access is greyed out, Microsoft says an administrator must change it.

If the camera works in apps but not in a website

Microsoft Edge needs camera and microphone access enabled in Windows, and each website still needs your permission.

When a site asks, choose Allow.

To check a site you blocked earlier, open Settings and more > Settings > Privacy, search, and services > Site Permissions > All sites.

Select the site and make sure Camera and Microphone are not set to Block.

How to tell the device is being used

Microsoft says a camera light turns on when the camera is active, if the device has one.

Without a light, Windows shows a notification when the camera turns on or off.

For the microphone, a microphone icon appears in the taskbar notification area while an app uses it.

Seeing these indicators confirms Windows is letting the app reach the device.

No Signal in games with some Elgato cards

Elgato documents a different problem for the Game Capture 4K Pro, 4K60 Pro MK.2 and HD60 Pro.

These cards use DirectShow, and some games may cause a No Signal message in the capture software.

Elgato says the games’ anti-cheat engine can block the DirectShow driver, and names Valorant and Fortnite as examples.

TechnologyElgato cardsAffected by anti-cheat No Signal
DirectShowGame Capture 4K Pro, 4K60 Pro MK.2, HD60 ProYes
UVCHD60 S+, HD60 X, 4K X, 4K SNo

The HD60 S+, HD60 X, 4K X and 4K S use UVC instead, so Elgato says they are not affected.

Elgato offers no workaround and suggests giving feedback to the game developers.

Old Game Capture HD says no capture device found

Elgato’s article for the older Game Capture HD says the software may show “No capture devices found”.

That product is now legacy, so the advice may not apply to current hardware.

Elgato’s steps are to restart the software, unplug everything for a minute, and try another USB cable and port.

It also suggests unplugging other USB devices one at a time to find a conflict.

If the camera still is not seen after these changes, use our guide to camera not working on Windows 11.

For audio, see microphone not working on Windows 11.

If an Elgato Facecam shows a USB error, read the USB3-REQUIRED-FOR-FACECAM fix.

When to contact Elgato support

If video or audio is still missing, Elgato points readers to the support widget on its article pages.

Sources: Elgato: capture card and Windows privacy settings, No Signal in certain PC games, Microsoft: camera permissions and Windows camera, microphone and privacy.

Leave a Reply

Your email address will not be published. Required fields are marked *