|

Fix Device Manager Code 28 Drivers Not Installed (2026)

Code 28 in Device Manager means Windows has no driver installed for that device.

The device shows a yellow exclamation mark, and its status reads “The drivers for this device are not installed. (Code 28).”

Microsoft’s fix is to get the device’s driver in place, and the steps below follow its pages in the order to try them.

Quick answer

TryFixBest when
1Check Optional updates in Windows UpdateThe device is a built-in part such as Wi-Fi, audio or graphics
2Update driver, search automaticallyWindows has not looked for this driver yet
3Download the driver from the maker and install itWindows finds nothing
4Uninstall the device, then scan for hardware changesThe driver is damaged or half installed

What Code 28 means

Microsoft’s driver documentation names this problem CM_PROB_FAILED_INSTALL and describes it as the device’s drivers not being installed.

Its recommended resolution for end users is to visit the device manufacturer’s website and download the most recent drivers for the device.

Microsoft’s error-code page adds an uninstall-and-rescan routine, which is Fix 4 below.

ItemMicrosoft’s wording
MessageThe drivers for this device are not installed. (Code 28)
Problem nameCM_PROB_FAILED_INSTALL
End-user resolutionDownload the most recent drivers from the manufacturer’s website

See the error in Device Manager

  1. Right-click the Start button and select Device Manager.
  2. Look for a device with a yellow exclamation mark, often under Other devices or Unknown devices.
  3. Right-click it and select Properties.
  4. On the General tab, read the Device status box for the code and message.

Fix 1: Check optional driver updates

Microsoft says Windows 10 and 11 can download and install recommended drivers through Windows Update.

It also says optional drivers are not installed automatically, so you add them yourself.

  1. Open Settings, then Windows Update, then Advanced options.
  2. Make sure the setting for receiving updates for other Microsoft products is on.
  3. Under Additional options, select Optional updates.
  4. Tick any driver updates listed and select the download and install option.
  5. Restart the PC afterward, even if Windows does not ask you to.

Fix 2: Update the driver in Device Manager

  1. In Device Manager, right-click the device and select Update driver.
  2. Select Search automatically for drivers.
  3. If Windows finds a driver, let it install and restart if asked.

If Windows finds nothing, Microsoft’s article points you back to Windows Update and then to the manufacturer.

The full routine is in our guide to updating a driver in Device Manager.

Fix 3: Install the driver from the maker’s website

Microsoft says to check the hardware manufacturer’s website for a driver that matches your version of Windows.

  1. Find the exact name of the device in its Properties window, or the model of your PC or card.
  2. Download the newest Windows driver from the PC maker or device maker.
  3. If the download is an installer, run it and restart.
  4. If it is a folder of files, right-click the device in Device Manager, select Update driver, then Browse my computer for drivers, and point it to the folder.

Download only from the maker’s own support site, because a wrong or tampered driver can cause the next error on this list, Code 52.

Fix 4: Uninstall the device and scan again

This is the routine Microsoft gives for Code 28 on its Device Manager error-code page.

  1. In Device Manager, right-click the device and select Uninstall.
  2. When it finishes, open the Action menu and select Scan for hardware changes.
  3. Windows then tries to reinstall the driver.
  4. If it asks for a driver location and you have none, get the latest driver from the manufacturer’s website.

If Code 28 started after a Windows upgrade

Microsoft’s driver documentation says a device that worked before an upgrade and shows Code 28 afterward is likely to have had its driver package left out during the upgrade.

In that case, the maker’s current driver for your Windows version, from Fix 3, is the way back.

If the device is a graphics card and the screen now looks generic, read our guide to the Microsoft Basic Display Adapter.

How Code 28 differs from similar codes

CodeMicrosoft’s messageFix
28The drivers for this device are not installed.Install the driver, or uninstall and scan for changes
31Windows cannot load the drivers required for this device.Update the driver
10This device cannot start.Update the driver
22This device is disabled.Action, then Enable Device
43Windows has stopped this device because it has reported problems.See our Code 43 guide

If Code 28 stays

Microsoft’s driver update article says to contact the device manufacturer if its steps do not work.

Give the maker the exact device name, your Windows version and the Code 28 message from the Device status box.

Sources

Microsoft: Code 28 CM_PROB_FAILED_INSTALL, Error codes in Device Manager in Windows, Update drivers through Device Manager and Automatically get recommended and updated hardware drivers.

Leave a Reply

Your email address will not be published. Required fields are marked *